Publications

Habilitation thesis (German and English)

   Shutov, A. V.:  Numerische Simulation des viskoplastischen Verhaltens metallischer Werkstoffe bei endlichen Deformationen (2014) ISBN: 978-3-944640-28-0

Publications in peer-review journals

  Shutov A.V, Kaygorodtseva A.A., Zakharchenko K.V., Kapustin V.I.: Uniaxial ratcheting and ductile damage in structural steel with a stochastic spreading of experimental data. ZAMM (2024)   https://doi.org/10.1002/zamm.202300197

Keywords: finite strain ratcheting, hardening stagnation, ductile damage, parameter identification, collar of model responses, protrusion

  Shutov A.V, Klyuchantsev V.S.: Integral-based non-local approach to ductile damage and mixed-mode fracture. Engineering Fracture Mechanics (2023)  https://doi.org/10.1016/j.engfracmech.2023.109656

Keywords: ductile damage, mixed-mode fracture, integral-based non-locality, stress-dependent delocalization

 Klyuchantsev V.S., Kurguzov V.D., Shutov A.V: Refined engineering theory of fracture with a two-parameter strength criterion. Physical Mesomechanics (2023)  https://doi.org/10.1134/S1029959923050077

Keywords: engineering theory of fracture, two-parameter strength criterion, quasi-brittle fracture, nonlocal damage models

  Shutov A.V, Klyuchantsev V.S.: Integral-based averaging with spatial symmetries for non-local damage modelling. ZAMM (2022)  https://doi.org/10.1002/zamm.202100434

Keywords: non-local damage, plane strain, plane stress, symmetry planes, easy-to-use delocalization kernel

  Shutov A., Rodionov A., Ponomarev D., Nekrasova Y.: Computationally efficient concept of representative directions for anisotropic fibrous materials. Polymers  (2022)  https://doi.org/10.3390/polym14163314

Keywords: fibrous composites, polymers, large strain, concept of representative directions, computational efficiency, electrospinning

  Tagiltsev I.I, Shutov A.V.: Combined experimental/theoretical approach to residual stresses within multiplicative elasto-plasticity. International Journal of Solids and Structures, (2022) 111924  https://doi.org/10.1016/j.ijsolstr.2022.111924

Keywords: residual stresses, multiplicative elasto-plasticity, weldments, weak invariance, experimental/theoretical analysis 

  Tagiltsev I.I, Parshin D.V., Shutov A.V.: Rational choice of modelling assumptions for simulation of blood vessel end-to-side anastomosis. Mathematical Modelling of Natural Phenomena (2022) https://doi.org/10.1051/mmnp/2022022

Keywords: residual stress, anisotropic hyperelasticity, anastomosis, cut geometry,  experimental errors 

  Kaygorodtseva A.A., Shutov A.V.: Inspection of ratcheting models for pathological error sensitivity and overparametrization. Meccanica (2022) https://doi.org/10.1007/s11012-022-01533-5

Keywords: overparametrization, ratchetting, Armstrong Frederick hardening, Ohno Wang models

 Klyuchantsev V.S., Shutov A.V: A comparative analysis of two approaches to nonlocal ductile damage modeling. Journal of Engineering Physics and Thermophysics (2022)  https://doi.org/10.1007/s10891-022-02632-6

Keywords: nonlocal damage mechanics, large deformations, Gurson–Tvergaard–Needleman model

  Shutov A.V., Klyuchantsev V.S.: Large strain integral-based nonlocal simulation of ductile damage with application to mode-I fracture. International Journal of Plasticity (2021) https://doi.org/10.1016/j.ijplas.2021.103061

Keywords: finite strain, ductile damage, nonlocal damage, elasto-plasticity, mode I fracture

  Ghobadi E., Shutov A., Steeb H.: Parameter identification and validation of shape-memory polymers within the framework of finite strain viscoelasticity. Materials  (2021) https://doi.org/10.3390/ma14082049

Keywords: finite strain viscoelasticity, parameter identification, functional materials, shape memory effect, shape memory polymer, physical aging, swelling

   Nazarkina Z.K., Chelobanov B.P., Kuznetsov K.A., Shutov A.V., Romanova I.V., Karpenko A.A., Laktionov P.P.: Influence of elongation of paclitaxel-eluting electrospun-produced stent coating on paclitaxel release and transport through the arterial wall after stenting. Polymers  (2021) https://doi.org/10.3390/polym13071165

Keywords: paclitaxel, drug-eluting stents, polycaprolactone, electrospinning

   Kurguzov V.D., Shutov A.V.: Elasto-plastic fracture criterion for structural components with sharp V-shaped notches. International Journal of Fracture  (2021) https://doi.org/10.1007/s10704-021-00530-1

Keywords: sharp notches, mode I fracture, Leonov–Panasyuk–Dugdale model, coupled fracture criterion, diagrams of quasi-brittle fracture

   Tagiltsev I.I., Shutov A.V.: Geometrically nonlinear modelling of pre-stressed viscoelastic fibre-reinforced composites with application to arteries. Biomechanics and Modeling in Mechanobiology  (2020) https://doi.org/10.1007/s10237-020-01388-3

Keywords: fibre-reinforced composite, initial stresses, arteries, large strains, viscoelasticity, F0-approach

   Shutov A.V., Kaygorodtseva A.A.: Sample shapes for reliable parameter identification in elasto-plasticity. Acta Mechanica (2020) DOI :10.1007/s00707-020-02758-9

Keywords: robust parameter identification, design of experiemnts, finite strain elasto-plasticity, anisotropy, torsion tests, tension-compression tests

  Shutov A.V., Laktionov P.P., Nekrasova Y.S.: Extending uniaxial material laws to multiaxial constitutive relations: H-approach. European Journal of Mechanics - A/Solids (2020)  https://doi.org/10.1016/j.euromechsol.2019.103937 . Keywords: finite strains, constitutive modelling, concept of representative directions, Hencky strain, electrospun polymer.

  Gostev A.A., Shundrina I.K., Pastukhov V.I., Shutov A.V., Chernonosova V.S., Karpenko A.A., Laktionov P.P.: In vivo stability of polyurethane-based electrospun vascular grafts in terms of chemistry and mechanics. Polymers 12(4)  10.3390/polym12040845 Keywords:tecoflex, pellethane, gelatin, electrospinning, vascular grafts, polyurethane stability in vivo.

  Shutov A.V., Kaygorodtseva A.A.: Parameter identification in elasto‐plasticity: distance between parameters and impact of measurement errors. ZAMM (2019)  https://doi.org/10.1002/zamm.201800340 . Keywords: distance between parameters, finite strain, isotropic and kinamtic hardening, measurement error, parameter identification.

  Tagiltsev I.I., Laktionov P.P., Shutov A.V.: Simulation of fiber-reinforced viscoelastic structures subjected to finite strains: multiplicative approach. MECCANICA (2018) 53(15), 3779–3794.

Keywords: fiber-reinforced composite, large strain Hyperelasticity, viscoelasticity, efficient numerics, multiplicative decomposition.

   Chernonosova V.S., Gostev A.A., Gao Y., Chesalov Y.A., Shutov A.V., Pokushalov E.A., Karpenko A.A., Laktionov P.P.: Mechanical properties and biological behavior of 3d matrices produced by electrospinning from protein-enriched polyurethane. BioMed Research International. (2018) DOI: 10.1155/2018/1380606 Keywords:electrospinning, tecoflex EG-80A, SEM, FTIR spectroscopy, cultivation of endothelial cells.

   Shutov, A. V.: Efficient time stepping for the multiplicative Maxwell fluid including the Mooney-Rivlin hyperelasticity. International Journal for Numerical Methods in Engineering. (2018), 113(12), 1851-1869.

Keywords:Maxwell fluid, finite strain, Mooney-Rivlin, explicit update formula, viscoelasticity.

   Shutov, A. V.; Larichkin A. Yu.; Shutov V. A: Modelling of cyclic creep in the finite strain range using a nested split of the deformation gradient. ZAMM (2017), DOI: 10.1002/zamm.201600286 .

Keywords:cyclic creep, transient creep, finite strain, static recovery, dynamic recovery, creep damage.

   Shutov, A. V.: Efficient implicit integration for finite-strain viscoplasticity with a nested multiplicative split. Computer Methods in Applied Mechanics and Engineering (2016), 306(1), 151-174.  arXiv-preprint.

Keywords: implicit time stepping, partitioned Euler Backward, multiplicative elasto-plasticity, kinematic hardening, finite element method.

   Shutov, A. V.;   Silbermann, C. B; Ihlemann, J.: Ductile damage model for metal forming simulations including refined description of void nucleation.  International Journal of Plasticity (2015), 71, 195-217.

Keywords: ductile damage, Bauschinger effect, kinematic hardening, finite strain elasto-plasticity, multiplicative plasticity, void nucleation.

   Shutov, A. V.;   Ihlemann, J.: Analysis of some basic approaches to finite strain elasto-plasticity in view of reference change. International Journal of Plasticity (2014), 63, 183-197. 

Keywords: finite strain elasto-plasticity, reference change, weak invariance, hypoelasto-plasticity, logarithmic elasto-plasticity, multiplicative plasticity.

   Silbermann, C.B.;    Shutov, A. V.;    Ihlemann, J.: Modeling the evolution of dislocation populations under non-proportional loading. International Journal of Plasticity (2014), 55, 58-79.

Keywords: two-phase composite model, dislocation dynamics, dislocation cells, ECAP, non-proportional loading, viscoplasticity.

   Shutov, A. V.;    Landgraf, R.;    Ihlemann, J.: An explicit solution for implicit time stepping in multiplicative finite strain viscoelasticity. Computer Methods in Applied Mechanics and Engineering (2013), 256, 213-225.

Keywords: viscoelasticity, Maxwell fluid, finite strains, implicit time stepping, integration algorithm, Euler-backward method.

   Shutov, A. V.;    Ihlemann, J.: A viscoplasticity model with an enhanced control of the yield surface distortion. International Journal of Plasticity (2012), 39, 152-167.

Keywords: viscoplasticity, yield function, kinematic hardening, distortional hardening, rheology.

   Shutov, A. V.;    Pfeiffer, S.;    Ihlemann, J.: On the simulation of multi-stage forming processes: invariance under change of the reference configuration. Materialwissenschaft und Werkstofftechnik, (2012), 43(7), 617-625. ECAP simulation 1. ECAP simulation 2.

Keywords: viscoplasticity, finite strains, change of reference configuration, kinematic hardening, initial plastic anisotropy, ECAP.

   Freund, M.;    Shutov, A. V.;    Ihlemann, J.: Simulation of distortional hardening by generalizing a uniaxial model of finite strain viscoplasticity. International Journal of Plasticity, (2012), 36, 113-129.

Keywords: viscoplasticity, yield surface, kinematic hardening, distortional hardening, representative directions.

   Shutov, A. V.;    Ihlemann, J.: On the simulation of plastic forming under consideration of thermal effects. Materialwissenschaft und Werkstofftecnhik, (2011) 42, 7, 632-638. Preprint.

Keywords: thermo-plasticity, viscoplasticity, large strains, kinematic hardening, detached free energy.

   Shutov, A. V.;    Panhans, S.;    Kreißig, R.: A phenomenological model of finite strain viscoplasticity with distortionalhardening. ZAMM, (2011) 91, 8, 653-680. Preprint.

Keywords: viscoplasticity, finite strains, distortional hardening, kinematic hardening, limacon of Pascal, rheological modeling.

   Shutov, A. V.;    Kreißig, R.: Geometric integrators for multiplicative viscoplasticity: analysis of error accumulation. Computer Methods in Applied Mechanics and Engineering, (2010) 199, 700-711. Preprint.

Keywords: viscoplasticity, finite strains, contractivity, exponential stability, inelastic (viscoplastic) incompressibility, integration algorithm, error accumulation.

   Shutov, A. V.;     Kuprin, C.;     Ihlemann, J.;     Wagner, M. F.-X.;     Silbermann, C.: Experimentelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4. Materialwissenschaft und Werkstofftechnik, (2010) 41, 9, 765-775.

   Shutov, A. V.;    Kreißig, R.: Regularized strategies for material parameter identification in the context of finite strain plasticity. Technische Mechanik, (2010), 30(1-3), 280-295.

Keywords: parameter identification, inverse problem, regularization techniques, material testing, viscoplasticity, finite strains.

   Shutov, A. V.;     Hockauf, K.;     Halle, T.;     Kreißig, R.;     Meyer, L.W.: Experimentelle und phänomenologische Beschreibung des mechanischen Verhaltens der Aluminiumlegierung EN AW-7075 nach großer plastischer Vorverformung. Materialwissenschaft und Werkstofftechnik, (2009) 40, 7, 551-558.

   Shutov, A. V.;    Kreißig, R.: Application of a coordinate-free tensor formalismto the numerical implementation of a material model. Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM), (2008) 88, 11, 888-909. Preprint.

Keywords: coordinate-free formalism, coordinate-free programming, classical tensor analysis, material modeling, time-stepping scheme, analytical linearization, consistent tangent modulus, viscoplasticity.

   Shutov, A. V.;    Kreißig, R.: Finite strain viscoplasticity with nonlinear kinematic hardening: Phenomenological modeling and time integration. Computer Methods in Applied Mechanics and Engineering, (2008) 197, 2015-2029. Preprint.

Keywords: plascticity/viscoplasticity, finite strains, nonlinear kinematic hardening, inelastic incompressibility, integration algorithm.

   Shutov, A. V;    Sändig, A.-M.: Mathematical analysis of fully coupled approach to creep damage. Preprint Stuttgart University, (2006)

Keywords: continuum damage mechanics, Kachanov-Rabotnov approach, creep, damage localization, strain localization.

   Shutov, A. V.;    Altenbach, H.;    Naumenko, K.: Steady-state creep analysis of pressurized pipe weldments by perturbation method. International Journal of Solids and Structures, (2006) 43, 22-23, 6908-6920

Keywords: creep, circumferential pipe weldments, stress analysis, parametric analysis, perturbation method (small parameter method), Kantorovich method.

   Shutov, A. V.: Numerical simulation of brittle fracture of thin-walled structures. International Journal of Fracture, (2004) 128, 325-333

Keywords: brittle fracture, material modeling, dynamic buckling, finite element method, shells and plates.

   Shutov, A. V.: Two nonlinear models of brittle fracture for solids. Applied Mechanics and Technical Physics, (2004) 46, 6, 853-859

Keywords: brittle fracture, material modeling, crack path determination.

   Kurlenya, M. V., Mirenkov V. E., Shutov A. V.: Estimate of the effect of the dead weight load of rocks on their deformation near workings. Journal of mining science, (2000) 36, 5, 439-444

Keywords: Kolosov—Muskhelishvili complex potentials, linear elasticity, overdetermined problems.

   Shutov A. V., Krasnovskii A. A., Mirenkov V. E.: Modeling of contact conditions during the deformation of rock samples. (In Russian) FTPRPI, (2004) 40, 2, 134-131

   Korobeinikov S. N., Khudyakov Y. S., Shutov A. V.: Comparative analysis of defensive armour of Central Asian Nomads by means of mathematical simulation. (In Russian) Numerical methods and programming, (2004) 5, 197-213

   Shutov A. V.: Dynamic contact interaction of elements of building structures. (In Russian) Izvestiya vuzov. Stroitel’stvo, (2004) 1, 114-119

   Korobeinikov S. N., Shutov A. V.: Choice of reference surface in plates and shells equations. (In Russian) Siberian Journal of Numerical Mathematics, (2003) 8, 6, 38-59

   Shutov A. V.: A mathematical model of impact interaction of an arrow with armor coating. (In Russian) Siberian Journal of IndustrialMathematics, (2003) 6, 2, 145-155

   Korobeinikov S. N., Khudyakov Y. S., Shutov A. V.: Mathematical simulation of brittle fracture of thin-walled structures. (In Russian) Numerical methods and programming, (2002) 3, 2, 94-117

   Korobeinikov S. N., Khudyakov Y. S., Shutov A. V.: Methods of mathematical simulation to analyze the protective capacity of bronze helmets of Central Asian Nomads. (In Russian) Siberian journal of industrial mathematics, (2002) 5, 2, 126-138

   Mirenkov V. E., Poluektov V. A., Shutov A. V.: Mathematical simulation of deformation in 2-dimensional case. (In Russian) Izvestiya vuzov. Stroitel’stvo, (2001) 9-10,26-28

   Kurlenya, M. V., Mirenkov V. E., Shutov A. V.: Stress-state of rock massive in the zone of mutual interaction of the excavations. (In Russian) FTPRPI, (2000) 3, 8-16

   Kurlenya, M. V., Mirenkov V. E., Shutov A. V.: Calculation of stress-state of rock massive by experimental data on deformation. (In Russian) FTPRPI, (1999) 3, 27-35

Conference talks + proceedings

   A A Kaygorodtseva, K V Zakharchenko, V I Kapustin, A V Shutov: Invariant procedure for error sensitivity analysis applied to cyclic creep modelling, J. Phys.: Conf. Ser. 1945 012015 (2021)

   I I Tagiltsev, A V Shutov: Assessment of residual stresses in a T-joint weld by combined experimental/theoretical approach, J. Phys.: Conf. Ser. 1945 012059 (2021)

   V S Klyuchancev, A V Shutov: Nonlocal FEM Simulations of ductile damage with regularized crack path predictions, J. Phys.: Conf. Ser. 1945 012018 (2021)

   K V Zakharchenko, A A Kaygorodtseva, V I Kapustin,  and A V Shutov: Method for studying the kinetics of plastic deformation and energy dissipation during fatigue of structural materials, J. Phys.: Conf. Ser. 1942 012001 (2021)

   A A Kaygorodtseva, V I Kapustin, K V Zakharchenko and A V Shutov: On the ratcheting of the VT6 alloy in a range of loading scenarios,  J. Phys.: Conf. Ser.Vol. 1666 012020 (2020)

  Shutov A.V., Klyuchancev V.S.: Solving elasto-viscoplastic problems by smoothed particle hydrodynamics. AIP Conference Proceedings 2216, 030006  (2020)

  Shutov A.V., Kaygorodtseva A.A.: Stability of Parameter Identification Using Experiments with a Heterogeneous Stress State, In: Naumenko K., Krüger M. (eds) Advances in Mechanics of High-Temperature Materials. Advanced Structured Materials, vol 117. Springer, Cham (2020) 

  Zakharchenko K.V., Kapustin V.I., Shutov A.V.: On the analysis of energy dissipation and ratcheting during cyclic deformation of the titanium alloy VT6 (Ti-6Al-4V),  J. Phys.: Conf. Ser.1431 012025 (2020)

  Shutov A.V., Tagiltsev I.I.: Efficient Numerics for the Analysis of Fibre-reinforced Composites Subjected to Large Viscoplastic Strains, In: Altenbach H., Öchsner A. (eds) State of the Art and Future Trends in Material Modeling. Advanced Structured Materials, vol 100. Springer, Cham (2019)

  Shutov A., Klyuchantsev V.: On the application of SPH to solid mechanics,  J. Phys.: Conf. Ser. (2019) 1268 012077

  Shutov A.V., Tagiltsev I.I.: Efficient integration of evolution equations for a fiber-like Maxwell body, J. Phys.: Conf. Ser.   (2019) 1268 012078

  Shutov A.V.: Extended concept of representative directions to describe inelastic behaviour of electrospun polymers. In: COMPLAS XV: proceedings of the XV International Conference on Computational Plasticity: fundamentals and applications. CIMNE (2019) 273-280.

  Shutov A.V.: Fully coupled two-phase composite model for microstructure evolution during non-proportional severe plastic deformation, Defect and Diffusion Forum. (2018) 385, 234-240.

  Shutov A.V.: Efficient intergration for the Simo-Miehe model with Mooney-Rivlin potential, 6th European Conference on Computational Mechanics, 7th European Conference on Computational Fluid Dynamics. pp. 1927-1937, Glasgow, UK (2018).

  Shutov, A. V.: Models of nonlinear kinematic hardening based on different versions of the rate-independent Maxwell fluid, COMPLAS 2017 - International Conference on Computational Plasticity, September 5-7, Barcelona, Spain (2017).

  Shutov, A. V.; Larichkin, A. Yu.: Finite strain transient creep of D16T alloy: identification and validation employing heterogeneous tests, IOP Conf. Series: Journal of Physics: Conf. Series 894  (2017) 012110  doi :10.1088/1742-6596/894/1/012110

  Shutov, A. V.; Kaygorodtseva, A. A.; Dranishnikov, N.S.: Optimal error functional for parameter identification in anisotropic finite strain elasto-plasticity, IOP Conf. Series: Journal of Physics: Conf. Series 894 (2017) 012133 doi :10.1088/1742-6596/894/1/012133

  Shutov, A. V.; Larichkin A. Yu.; Shutov V. A.: Modelling of large strain creep with static and dynamic recovery under cyclic loading conditions, 88th GAMM Annual Meeting, March 6-10, Weimar, Germany (2017).

  Shutov, A. V.: Seven different ways to model viscoelasticity in a geometrically exact setting, Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering 1, pp. 1959-1970, Crete, Greece (2016).

  Shutov, A. V.: On exploiting the weak invariance of multiplicative elasto-plasticity for efficient numerical integration, COMPLAS 2015 - International Conference on Computational Plasticity, September 1-3, Barcelona, Spain (2015).

  Landgraf, R., Shutov, A. V.; Ihlemann, J.: Efficient time integration in multiplicative inelasticity, 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 23-27, Lecce, Italy (2015).

  Silbermann, C. B.; Shutov, A. V.; Ihlemann, J.: Analyse von Deformationsvorgangen in Aluminiumeinkristallen mit Hilfe der Kontinuumsversetzungstheorie, 17. Werkstofftechnisches Kolloquium (WTK), September 11-12, Chemnitz, Germany (2014).

  Shutov, A. V.; Silbermann, C. B.; Ihlemann, J.: Simulation of large inelastic deformations including damage-induced porosity within anisotropic viscoplasticity, 11th World Congress on Computational Mechanics (WCCM XI), July 20-25, Barcelona, Spain (2014).

  Silbermann, C. B.; Shutov, A. V.; Ihlemann, J.: Modeling the evolution of dislocation populations upon load path changes, 6th International Conference on Nanomaterials by Severe Plastic Deformation, June 30-July 4, Metz, France (2014).

  Shutov, A. V.; Silbermann, C.B.; Ihlemann, J.: Distribution of dislocation density and residual stresses in plastically deformed specimens: numerical studies, 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 10-14, Erlangen, Germany (2014).

  Silbermann, C.B.; Shutov, A. V.; Ihlemann, J.: On operator split technique for the time integration within finite strain viscoplasticity in explicit FEM, 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 10-14, Erlangen, Germany (2014).

  Shutov, A. V.; Landgraf, R.; Ihlemann, J.: An efficient numerical algorithm for finite-strain viscoplasticity including kinematic and distortional hardening, COMPLAS 2013 - International Conference on Computational Plasticity, 3-5 September, Barcelona, Spain (2013).

  Shutov, A. V.; Silbermann, C.B.; Ihlemann, J.: Ductile damage model for metal forming simulations including physics based modeling of void nucleation, 2nd International Workshop on Physics Based Modeling of Material Properties and Experimental Observations. Special focus: Fracture and Damage Mechanics, 15-17 May, Antalya, Turkey (2013).

   Shutov, A. V.; Landgraf, R.; Ihlemann, J.: An explicit update formula for implicit time integration within finite strain viscoelasticity, 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 18-22, Novi Sad, Serbia (2013).

   Shutov, A. V.; Ihlemann, J.: On the absence of a preferred configuration in constitutive relations of finite strain elasto-plasticity, 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 18-22, Novi Sad, Serbia (2013).

   Shutov, A. V.; Silbermann, C.; Ihlemann, J.: Modeling the evolution of dislocation densities upon strain path change , International Symposium on Plasticity and Its Current Applications, January 3-8, Nassau, Bahamas (2013). Editors: Akhtar S. Khan, F. Kabirian, J. Liu, M. Serebreni. NEAT Press, ISBN: 0-9659463-4-2

   Shutov, A. V.; Ihlemann, J.: On the invariance of constitutive equations under the isochoric change of reference configuration , International Symposium on Plasticity and Its Current Applications, January 3-8, Nassau, Bahamas (2013). Editors: Akhtar S. Khan, F. Kabirian, J. Liu, M. Serebreni. NEAT Press, ISBN: 0-9659463-4-2

  Shutov, A. V.; Ihlemann, J.: On the phenomenological modelling of yield surface distortion, 10th World Congress on Computational Mechanics, 8-13 July, Sao Paolo, Brazil (2012). (Blucher Mechanical Engineering Proceedings May 2014, vol. 1 , num. 1, 1662-1670)

   Shutov, A. V.; Pfeiffer, S.; Ihlemann, J.: Zur Simulation der mehrstufigen Umformung: Invarianz beim Wechsel der Referenzkonfiguration, 15. Werkstofftechnisches Kolloquium, 20. und 21. September, Chemnitz, Germany (2012).

   Shutov, A. V.; Ihlemann, J.: A rheological model for arbitrary symmetric distortion of the yield surface, 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics, March 26-30, Darmstadt, Germany (2012).

   Freund, M.; Shutov, A. V.; Ihlemann, J.: Simulation of distortional hardening by generalizing a uniaxial model of finite strain viscoplasticity , International Symposium on Plasticity and Its Current Applications, January 3-8, San Juan, Puerto Rico (2012).

   Shutov, A. V.; Ihlemann, J.: On the simulation of kinematic and distortional hardening in metals at finite strains, COMPLAS 2011 - International Conference on Computational Plasticity, 7-9 September, Barcelona, Spain (2011).

   Shutov, A. V.; Panhans, S.; Kreißig, R.; Ihlemann, J.: Direct connections of rheological elements: application to distortional hardening, ICCM2 - Second International Conference on Material Modelling, August 31st - September 2nd, Paris, France (2011).

   Kretzschmar, J.; Stockmann, M.; Shutov, A. V.: Determination of pressure distributions using a gradient based optimization method and application at forming tools for high gears , 10th Youth Symposium on Experimental Solid Mechanics, 25th – 28th May, Chemnitz, Germany (2011).

  Shutov, A. V.; Ihlemann J.: Zur Simulation plastischer Umformvorgänge unter Berücksichtigung thermischer Effekte, 14. Werkstofftechnisches Kolloquium, 1. und 2. September, Chemnitz, Germany (2011).

  Shutov, A. V.; Freund, M.; Ihlemann, J.: On the simulation of nonlinear hardening in metallic materials using the concept of representative directions , 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics, 18-21 April, Graz, Austria (2011).

  Shutov, A. V.; Panhans, S.; Kreißig R.; Ihlemann J.: On the simulation of distortional hardening: A rheological approach, 18th Bohemian-Saxon-Silesian Mechanics Colloquium, 1st November, Freiberg, Germany (2011).

  Shutov, A. V.; Panhans, S.; Kreißig R.; Ihlemann J.: Zur Simulation formativer Verfestigung bei großen Deformationen: ein rheologischer Zugang, Treffen des Arbeitskreises Stoffgesetze, Chemnitz, Germany (2011).

  Shutov, A. V.;    Panhans, S.;    Kreißig, R.;    Ihlemann, J.: Simulation of distortional hardening at finite strain: a rheological approach. The 17th International Symposium on Plasticity & Its Current Applications, Puerto Vallarta, Mexico (2011). Editors: Akhtar S. Khan, C. Meredith, B. Farrokh. NEAT Press, ISBN: 0-9659463-1-2

  Shutov, A. V.; Panhans, S.; Kreißig R.; Ihlemann J.: A Model of finite strain viscoplasticity with kinematic and distortional hardening, 3rd international conference on nonlinear dynamics, 21st – 24th September, Kharkov, Ukraine (2010).

  Shutov, A. V.; Kuprin, C.; Ihlemann J.; Wagner, M. F.-X.; Silbermann C.: Experementelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4, 13. Werkstofftechnisches Kolloquium, 30. September – 1. Oktober, Chemnitz, Germany (2010).

  Shutov, A. V.; Ihlemann, J.; Kreißig, R.: On the advantages of time stepping techniques preserving the inelastic incompressibility for large strain viscoplasticity, IV European Conference on Computational Mechanics, Palais des Congrès, Paris, France, May 16-21, (2010).

  Shutov, A. V.; Kreißig, R.: Regularized strategies for material parameter identification in the context of finite viscoplasticity, 1st International Conference on Material Modelling, September 15th-17th, Dortmund, Germany (2009).

  Meyer L. W.; Kuprin C.; Shutov, A.: Experimental yield point determination in metalsafter large plastic strains. Forming Technology Forum, May 5-6, Zurich, Switzerland (2009).

  Shutov, A. V.; Kreißig, R.: Zwei koordinatenfreie Darstellungen der Ableitung nach einem symmetrischen Tensor und deren Anwendung auf Probleme der Materialtheorie, Treffen des Arbeitskreises Stoffgesetze, 9. Mai, München (2008).

   Shutov, A. V.; Kreißig, R.: Two geometric integrators for finite-strain viscoplasticity with kinematic hardening, 8th.World Congress on Computational Mechanics (WCCM8), 5th European Congress on Computational Methods in Applied Sciences and Engineeering (ECCOMAS 2008) June 30 –July 5, Venice, Italy (2008).

   Shutov, A. V.; Kreißig, R.: Numerical treatment of a finite strain viscoplasticity model based on a double multiplicative split, 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31 March- 4 April, Bremen, Germany (2008).

   Shutov, A. V.; Kreißig, R.: Two implicit time-stepping schemes for finite strain viscoplasticity, 9th Bohemian-Saxon-Silesian Mechanics Colloquium, June 2nd , Freiberg, Germany (2007).

   Kreißig, R.; Putz M.; Shutov, A.; Bergmann, M.: Phänomenologische sowie mikrostrukturelle Modellierung von Materialen und Prozessen, 1. Kolloquium SFB 692 HALS, 26 September, Chemnitz, Germany (2007).

   Shutov A. V.: Dynamic contact interaction of a thin-walled structure with a striker. (In Russian) Modern problems of solid mechanics: proceedings of All-Russian conference, Novosibirsk, (2003), 259-263

   Annin, B. D., Korobeinikov S. N., Shutov A. V.: Simulation of brittle fracture of elastic blocks. (In Russian) Stress, strain, and seismicity of lithosphere: proceeding of All-Russian conference, Irkutsk, Novosibirsk: SB RAS Publ. house (2003) 225-228