How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a direct, model-specific replacement for your Anker Soundcore Life Q20 or Q20 BT, choose ZLiT Earpads; if you need fresh cushions for a Sennheiser HD280, HD280-Pro, HD281, HMD280 or HMD281, choose G GVOEARS Replacement Ear Pads. These two pads don't actually compete for the same buyer — they fit different headphones entirely. So the real question isn't which one is "better," it's which one matches the headset already sitting on your desk.
• ZLiT Earpads — biggest strength: a purpose-built oval pad (~90 x 75 mm, ~20 mm thick) with protein leather over high-density memory foam, made specifically for the Life Q20 / Q20 BT ear cup shape.
• ZLiT Earpads — biggest trade-off: it only fits that one Anker family, so it's useless if you own anything else.
• G GVOEARS Replacement Ear Pads — biggest strength: reinforced inside-seam stitching and extra thickness aimed at the classic splitting-seam failure on Sennheiser HD280-style pads.
• G GVOEARS Replacement Ear Pads — biggest trade-off: it's locked to the HD280/HD281/HMD280/HMD281 line and the brand explicitly notes it won't fit other Sennheiser series.
• Who each pick is for: ZLiT for Soundcore Life Q20 owners restoring comfort and passive isolation; G GVOEARS for HD280-family owners who want a sturdier, longer-lasting cushion.
The ZLiT Earpads are a single-purpose part: a pair of over-ear cushions sized for the Anker Soundcore Life Q20 and Q20 BT. The oval footprint runs roughly 90 x 75 mm and about 20 mm thick, which tells you these are built to match that specific ear cup rather than being a generic "fits many" pad. If your Q20 pads have gone flat, shiny or started flaking, this is the shape you want.
What they do well comes down to materials and function. The outer layer is protein leather — described as skin-friendly, wear-resistant and resistant to peeling — wrapped over high-density memory foam that slowly rebounds and conforms to your ear. In practice, that combination is what restores the physical seal around your ear, which is exactly what passive noise isolation depends on. A good seal also tends to firm up low-frequency response, so the pads are doing double duty: comfort and sound. ZLiT also prints L/R markings on the breathable mesh layer so you can orient them before pressing them on, and includes a blue pick tool to help pry off the old pads.
Installation is the usual pull-and-press routine: work the old cushions off along the edge, line the new ones up with the clips, then press evenly around the rim until they seat. Who should buy them? Anyone with a Life Q20 or Q20 BT whose pads are peeling, sunken or uncomfortable after long sessions — commuters, remote workers, students in noisy cafés, long-haul flyers. Who should skip them? Anyone who doesn't own that headphone. There's no cross-compatibility here, and the listing itself asks you to confirm your model before buying. ZLiT also suggests checking pads every 6–12 months and replacing them once they peel or flatten — a reasonable maintenance rhythm for foam that compresses daily.
G GVOEARS Replacement Ear Pads target a completely different headphone: the Sennheiser HD280, HD280-Pro, HD281, HMD280, HMD280 Pro, HMD280-13, HMD281 and HMD281 Pro. The brand is explicit that these do not fit other Sennheiser series, so this is a fit-specific part, not a universal one. If you own one of those models, it lines up; if you don't, it doesn't.
The interesting engineering here is the durability story. G GVOEARS leans on enhanced stitching and robust interior adhesive specifically to fight splitting seams — the failure mode HD280 owners tend to hit first. The pad also uses thick protein leather and enhanced memory foam, with extra thickness intended to keep the cushion from going flat over time, plus a sports-mesh fabric section described as non-slip and breathable for long wearing sessions. Inside-seam stitching is called out again in the design notes as a crack-prevention measure when paired with the PU leather. Read together, the pitch is: this pad is built to outlast a cheap replacement.
Installation is tool-free — the brand says no special tools are needed and the whole job takes a few minutes. You get one pair of ear pads, and the pads carry a 1-year manufacturer warranty. Who should buy them? HD280-family owners — studio, monitoring and call-center users especially — who are tired of replacing pads that split or flatten. Who should skip them? Anyone with a different Sennheiser line, and anyone expecting a plug-and-play fit on a non-HD280 headset.
• Best for Soundcore Life Q20 / Q20 BT owners → ZLiT Earpads. It's the only one of the two that fits that headphone.
• Best for Sennheiser HD280 / HD280-Pro / HD281 / HMD280 owners → G GVOEARS Replacement Ear Pads. Same logic in reverse.
• Best for fighting seam splits and flat foam → G GVOEARS. The reinforced inside stitching and extra thickness are aimed squarely at that problem.
• Best for restoring passive noise isolation on a Q20 → ZLiT Earpads. The memory foam seal and 20 mm thickness are what re-establish that cushion-and-isolate effect.
• Best for tool-free, few-minute installation → G GVOEARS. The brand states no special tools are required.
• Best if you want a pick tool included → ZLiT Earpads. The kit ships with a blue pick to help remove the old pads.
• Best for long-session comfort on either headphone → both, since each uses protein leather over memory foam; the difference is which headset they fit.
• Best for warranty coverage → G GVOEARS, which lists a 1-year manufacturer warranty.
In my opinion there's no single winner, because these pads serve two different headphones and you should simply buy the one built for yours. If you own an Anker Soundcore Life Q20 or Q20 BT, I'd get the ZLiT Earpads — the sizing, the L/R markings and the included pick tool make it a clean, purpose-made refresh. If you own a Sennheiser HD280-family headset, I'd get the G GVOEARS Replacement Ear Pads, because the reinforced seams and extra thickness target the exact wear that sends most people shopping in the first place. Match the pad to the headphone and you'll be happy either way. Worth checking the current price on Amazon before you commit, since both are consumable parts you may rebuy over time.
ZLiT Earpads. They're made for the Life Q20 and Q20 BT specifically, with an oval over-ear shape around 90 x 75 mm and about 20 mm thick.
Do G GVOEARS ear pads fit any Sennheiser headphone?
Based on the design notes, G GVOEARS puts more emphasis on longevity, citing enhanced stitching, interior adhesive and extra thickness to resist seam splitting and flattening. ZLiT instead recommends routine replacement every 6–12 months once pads peel or sink.
Both use protein leather over memory foam, which is the standard recipe for conforming, low-pressure comfort. ZLiT frames its pads around commuting, remote work, flights and home listening; G GVOEARS adds a breathable sports-mesh section and a 1-year manufacturer warranty.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.