We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-08 · 8 min read · Independent comparison
If you want wired, zero-latency in-ear monitors with real passive noise blocking and a spare pair for every bag, choose Yeabomy Gaming Earbuds 4; if you need an actual 47-inch desk with a monitor stand and a headphone hook to build a video-call station around, choose Pamray 47. These two products only compete in one narrow sense: both sit in the "monitor" conversation. One is a monitor headphone — the other is the furniture your monitor headphones sit next to. For video calls, that distinction is the whole decision.
• Yeabomy Gaming Earbuds 4 — biggest strength: Wired 3.5mm in-ear monitors with a 10mm dynamic driver, claimed ambient-noise blocking around 90 percent, and zero-latency audio because there's no wireless link to introduce lag.
• Yeabomy Gaming Earbuds 4 — biggest trade-off: It's a wired set with a 1.2m cable and no Bluetooth, so there's no wireless freedom and no transparency mode to pipe the room back in. It also comes as a four-pack, which is great value if you want spares and overkill if you don't.
• Pamray 47 — biggest strength: A 47.2" x 18.9" x 29.2" desk with a built-in monitor stand, an X-shaped back brace for stability, a headphone hook, a keyboard tray, and a 150-pound weight recommendation.
• Pamray 47 — biggest trade-off: It is furniture. It makes no sound, blocks no noise, and does nothing for call audio. If your problem is echo on calls, a desk won't fix it.
• Pick Yeabomy Gaming Earbuds 4 if you're shopping for the audio half of a work-from-home setup — calls, monitoring, music, gaming — and you want a wired, low-latency in-ear monitor.
• Pick Pamray 47 if you need the physical workspace first: a small-space desk in a bedroom, dorm or study room where the monitor stand and headphone hook matter more than the drivers.
The Yeabomy Gaming Earbuds 4 is a wired in-ear monitor built around a 10mm dynamic driver with a 20 Hz – 20,000 Hz frequency range and 16-ohm impedance. That impedance figure matters more than it looks. At 16 ohms these are easy to drive, which means a phone, a laptop headphone jack, a controller or a cheap USB audio adapter will all push them to usable volume without a dedicated amp. The 3.5mm gold-plated plug is the standard jack, and the spec sheet is clear that no drivers are needed — plug and play.
For the "best in ear headphones for video calls" crowd, the story here is wired reliability. There's no pairing dance before a meeting, no codec to negotiate, and no battery to check fifteen minutes before a call. The manufacturer states the wired connection allows zero-latency audio transmission, which is the honest technical advantage of a cable: what you say and what the other person hears aren't separated by a Bluetooth buffer. The ear monitors are also described as blocking around 90 percent of ambient noise — that's passive isolation from the rounded-tip in-ear fit, not an active chip, so it works with no power at all. In a shared apartment or a noisy café, that's the difference between a call where you can hear yourself think and one where you can't.
The four-pack is the odd, likeable part. You get four pairs of AK3FILE in-ears, three sizes of silicone tips (S/M/L), a 1.2m braided anti-tangle cable, and a two-year warranty. In my opinion, that's a genuinely useful bundle for someone who wants a set at the desk, a set in a laptop bag, a set for the console, and a spare that lives in a drawer. The metal-and-plastic housing and the multi-genre tuning — classical, pop, rock, ACG, electronic, DJ, metal — point at a general-purpose monitor rather than a one-trick gaming set.
Who should skip it? Anyone who has moved fully wireless and refuses to go back. There's no Bluetooth, so no transparency mode bluetooth headset for video calls here — you can't tap a button to let the room in. If you take calls while walking around a kitchen, a cable will remind you it exists. And if you want active noise cancellation with a battery, this is passive isolation instead. Buy it for the desk, the cable, and the latency, not for wireless freedom.
The Pamray 47 is a small computer desk, and it should be judged as one. At 47.2 inches wide, 18.9 inches deep and 29.2 inches tall, it's sized for the person who has a corner in a bedroom, dormitory, living room or study room and needs a real workstation in it. The frame is metal, the top is FSC-certified wood in a marble finish with a powder-coated surface, and the whole thing is rated for a maximum weight recommendation of 150 pounds. That's a desk that will hold a monitor, a laptop, a keyboard and a mug without drama.
The feature that earns it a place in this comparison is the monitor stand. A raised shelf lifts the screen to a more ergonomic height, which is the single cheapest fix for the neck-and-shoulder ache that shows up after a month of back-to-back video calls. There's also a headphone hook on the side — the desk literally has a home for the headphones you take off between meetings — plus a keyboard tray included in the box and an "X" shaped back brace that the manufacturer says reduces wobble and shifting.
Assembly is handled better than most flat-pack furniture: there are installation videos, clear printed instructions, and all necessary tools in the accessory bag. It weighs 21.6 pounds, so one person can move it, and it comes in more than seven color options including the marble/light gray top shown here. The recommended uses list gaming, and the compact footprint keeps it usable in rooms that can't fit a full 60-inch setup.
Side-by-Side: Which Should You Choose?
• Best for video call audio → Yeabomy Gaming Earbuds 4. Wired connection, zero-latency transmission, passive noise blocking around 90 percent.
• Best for a small-space workstation → Pamray 47. 47.2" wide, 18.9" deep, built for bedrooms, dorms and studies.
• Best for latency-sensitive gaming → Yeabomy Gaming Earbuds 4. The cable removes the wireless buffer entirely.
• Best for monitor ergonomics → Pamray 47. The integrated monitor stand raises your screen; the headphone hook keeps the desk clear.
• Best for wireless freedom → neither, honestly. The Yeabomy set is wired by design, and the Pamray is a desk. If you need Bluetooth and transparency mode, you're shopping a different category.
• Best for sharing or spares → Yeabomy Gaming Earbuds 4. Four pairs, three tip sizes, a 1.2m braided cable and a two-year warranty.
• Best for durability under load → Pamray 47. Metal frame, X-brace, 150-pound weight recommendation.
• Best all-in-one for a brand-new desk setup → Pamray 47 first, Yeabomy second. Buy the surface, then the monitor headphones to plug into it.
If you're building a video-call setup from scratch, I'd buy the Pamray 47 first — a desk with a monitor stand and a headphone hook fixes your posture and your clutter, and those are problems no earbud can touch. But if you already have a desk and your calls still sound or feel wrong, I'd buy the Yeabomy Gaming Earbuds 4. In my opinion, the wired zero-latency connection, the easy-to-drive 16-ohm load and the roughly 90 percent passive noise blocking make it the more directly useful of the two for video calls, and the four-pack means you're never hunting for a pair. Check the current price on Amazon before you commit to either.
how to check headphones battery
On a wireless headset you'd check the battery in your phone's Bluetooth settings, in the companion app, or via a voice prompt on the headset itself. The Yeabomy Gaming Earbuds 4 doesn't need any of that — it's a wired 3.5mm set with no battery to check. The Pamray 47 is a desk and has no battery either.
how to check headphones battery on iphone
On iPhone, paired Bluetooth audio devices usually show their battery level in the Settings app under Bluetooth, or on the battery widget. That only applies to wireless gear. Since the Yeabomy Gaming Earbuds 4 runs off a wired 3.5mm connection, there's no battery indicator to look for — plug in and it works.
how to check headphones
The quickest check is physical: confirm the plug type and whether the cable is seated. The Yeabomy set uses a standard 3.5mm gold-plated jack, needs no drivers, and is plug and play, so if you get sound, it's working. Also confirm the ear tip size — three pairs (S/M/L) are included, and a proper seal is what delivers the claimed noise blocking.
how to check headphones mic
There's no separate mic check procedure listed for these in-ears beyond plugging them into a device and selecting them as the input. Because the Yeabomy Gaming Earbuds 4 is wired with a 1.2m cable and remote controls, your computer or phone should detect it as an audio device automatically. The Pamray 47 has no microphone at all.
• PHOINIKAS PS5 vs SENECESLI AI Translation Earbuds
• Kinglucky Clip-On Earbuds Comfortable vs Conyat Open-Ear Headphones
• SIMOLIO TV Headphones vs NOUUI Headphones comparison
• PROHEAR 037 vs Belkin SoundForm Nano 2
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.