Huawei B593-12 Firmware

I did try out a number of SP104 and SP105 T-mobile (German Telecom) firmwares and found that they are really poor. 3 Italy was a pretty poor firmware, as I had problems logging in! Polkomtel's SP103 was a solid performer, but after a round trip, I went back to Telia's SP102.

Please drop me a comment if something is wrong or new columns should be added, or if I'm missing a firmware in the list. My idea is to try to keep this up to date with firmware information and I will appreciate any help from you.

Download 🔥 https://urllio.com/2y25Ax 🔥

For firmware versions V100R001C748SP106 and V100R001C748SP107, you can modify the original firmware before flashing it to disable the firewall rules that block the Telnet Server. There is link a the end to of the page to the source of this information.

The router is generally available over SSH, but the password is not in the firmware file (i.e. it cannot be extracted via fmk). But you can find the plaintext SSH password in /var/sshusers.cfg if you have serial or Telnet access.

The router also saves a rescue image (from firmware file B593-small.trx) on flash. The easiest way of returning this and other parts of flash to the original state is flashing the bz2 file from the vendor trough the factory image. To do so, restore B593.trx as described above, log in via TTL or Telnet, connect a USB drive with the factory firmare, e.g. V100R001C748SP107.tar.bz2, and then run upg -f V100R001C748SP107.tar.bz2.

4) Select System > Upgrade > select tar. (The file you just extracted from the zip. file)> press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12.

Little bit of Googling revealed that some telcos actually don't put it there. I did get my box from an independent reseller, but it looked like it was a Sonera (Telia) branded hardware. Little bit of more Googling ended me to one of their competitors, Saunalahti. From their customer support page, I got their firmware, uploaded it and noticed a number of drastic changes. Login screen was changed in to a generic Huawei one. After login my precious SMS-menu was there!

Anyway, the thingie had a very old firmware and I thought that it would be a good idea to upload the newest factory firmware into it. That failed immediately, all I got was a "Image File Is Incorrect" error message. The message was spat out from the GUI almost immediately, so I decided to debug it. Here is the code I found:

It was safe to rename the file and upload the firmware. It didn't brick the thing. There seems to be plenty of people having the same issue. The unit seems to have interesting ports open, nobody knows why. Here are the port scan results:

QNAP released their version 4 firmware. Its GUI has iPad-look and feel and is a major improvement overall. It has all the existing features (actually I don't know of any new interesting things), but the management interface has been completely re-written. It responds much faster and is really nice to use. Actually the version 3 GUI was very, very slow to log-in or respond to a click. It looks like this:

I also did investigate if the box would be based on Linux. Huawei has some GPL-components in the firmware, but they don't release BusyBox nor Dropbear source. It is possible, that they are using something of their own make or simply don't have a prompt or are not using Linux at all. The reason I'd like to see them is that both BusyBox and Dropbear SSHd are very typically used in Linux-based hardware.

You will find a .zip-file, which will contain the firmware file with name hi3g_r+m+h+s.tar.bz2 in it. The file is dated 20th Nov 2012. After the firmware upgrade, a software version of V100R001C26SP054 will be installed:

The previously used Saunalahti firmware has software version of V100R001C260SP055, so the difference is C26 SP054 vs. C260 SP055. It is a known fact that telcos get a firmware modification kit from Huawei and can enable/disable features and add their own skins (see previous posts).

The lack of connectivity was for the reason, that during update the APN-settings were set for 3 Denmark. Naturally they didn't work for me. This firmware has the VoIP-functionality enabled, thus, there is need for 2 separate APNs. Finnish telco's don't have the VoIP, so I cannot test that. But that does make the APN-setting -screen quirky. You cannot edit/delete an APN which is in use, either as data connection or VoIP-connection. There is no visual feedback about that, so I had to investigate the setting screen -logic for a while.

There are number of discussions for getting a new firmware (they even copy/paste stuff from my blog without crediting me as the author), but please carefully find out the exact model before upgrading. If you manage to inject an incorrect firmware, it will most likely brick your thing. I didn't try that and don't plan to.

Just to be clear, the 3.dk's version for u-12 is V100R001C26SP054. Another thing: I didn't test the new version, currently my router runs just fine. If you do, please drop me a comment. The version number and router compatibility information comes from extracted firmware header it says (in hexdump -C):

This is the the obligatory warning: if you have a s-22 DON'T update with this firmware. If you don't know which version you have: DON'T update with this firmware. Nobody want's to brick the router, right? It is expensive and all.

I was looking for a firmware for s-22 and minutes after finding the Vodafone firmware, a Telenor one popped up. It must be a really new one, as I cannot find any comments about it from The Net. The download location for the firmware version V100R001C00SP070 is at -b593/V100R001C00SP070/.

I didn't test this version either. If you do the upgrade, please drop me a comment. The version number and router compatibility information comes from extracted firmware header it says (in hexdump -C):

After changing the setting my connection has been more stable than ever (on Danish 3's firmware). There has been occasions where my connection has dropped to 2.5G, see the blog post about it, but after fixing the LTE-only -mode things changed to most robust ever.