Vittorio Cuniberti
Vittorio Cuniberti — Italian Tier VIII destroyer.
The Maelstrate Class were a class of destroyers constructed for the Italian Navy between 1931 and 1934. Their design included a brand new hull that was intended to correct the stability problems experienced with the previous classes.
Ship Stats
Survivability
Health: 16,402
Citadel Protection: 5%
Fire and Flooding Resistance: 10%
Damage Reduction: 3%
Torpedo Damage Reduction: 3%
Armour
Bow: 19 mm
Stern: 19 mm
Deck: 19 mm
Belt: 19 mm
Maneuverability
Top Speed: 38.35 Knots
Time to Full Speed: 9.46 s
Max Traverse Speed: 8.60 deg/s
Turn Time: 3.90 s
Main Guns (120 mm L/50 OTO M1931 3x2)
Reload Time: 5.50 s
Rate of Fire: 65.45 RPM
Range: 7.13 km
Flight Time: 3.71 s
Initial Velocity: 268.53 m/s
Deceleration: 14.24 m/s²
Dispersion Min/Max/Vertical: 54 m / 168 m / 57.60 m
Sigma: 1 σ
HE Damage: 366
Raw Alpha: 2,196
Raw DPM: 23,956
Fire Chance: 3%
Raw Alpha: 16.70%
Raw FPM: 1.82 FPM
SAP Damage: 531
Raw Alpha: 3,186
Raw DPM: 34,756
Citadel Chance: 0%
Turret Traverse: 15 deg/s
Torpedo Tubes (553 mm 2x4)
Reload Time: 48 s
Salvo Per Minute: 2.50 SPM
Range: 10.20 km
Time Expire: 36.04 s
Torpedo Speed: 61.13 Knots
Reaction Time (at standstill): 11.51 s
Min/Max Torpedo Spread: 2 deg / 4 deg
Torpedo Damage: 3,540
Raw Alpha: 28,320
Raw DPM: 35,400
Flood Chance: 14%
Raw Alpha: 70.08%
Torpedo Concealment: 1.83 km
Torpedo Traverse Speed: 25 deg/s
Anti-Aircraft Armament
Small Caliber AA Damage: 85
Small Caliber AA Range: 1.80 km
Total AA Damage: 85
Concealment
Surface Detection: 6.60 km
After Firing Guns: 9.33 km
Ship Equipment, Elite Bonus and Supplies
Emergency Engine Accelerator x5
Max Speed: 20% for 12 seconds
Acceleration: 20% for 12 seconds
Before: 38.35 Knots / 9.46 s
After: 46.02 Knots / 9.08 s
Exhaust Fuel Smoke I x4
Smoke Activation: 6 s
Smoke Time: 2 s
Cooldown: 40 s
Elite Gun Operator
Main Battery Reload Time: -3%
Main Battery Traverse Speed: +7%
Before: 5.5 s / 15 deg/s
After 5.34 s / 16.05 deg/s
Elite Torpedo Operator
Torpedo Tube Reload Time: -3%
Torpedo Tube Traverse Speed: +7%
Before: 48 s / 25 deg/s
After: 46.56 s / 26.75 deg/s
Semi-Armour Piercing (SAP)
Compared to regular AP shells, SAP shells cause higher damage, but have less penetration power.