What is Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z?
Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z is a firmware file for WM8850 tablets that was shared by Faheem Anjum, a member of the GSM-Forum. According to him, this firmware file is compatible with some WM8850 tablets that have the following specifications:
Screen size: 7 inches
Touch panel: PuZhi or FT5206
Camera: Front and back
Android version: 4.0.3 Ice Cream Sandwich
Build number: W70_8223_1.0.0_120621
This firmware file is compressed in a 7z archive, which means you need to extract it before flashing it on your tablet. The extracted file is an image file with the extension .img, which can be flashed using a tool called LiveSuit.
What is LiveSuit?
LiveSuit is a Windows application that can flash firmware files on tablets with Allwinner chipsets, such as WM8850. LiveSuit can detect your tablet when it is connected to your computer via USB cable and in a special mode called FEL mode. FEL mode is a low-level mode that allows you to flash firmware on your tablet even if it does not boot normally. To enter FEL mode, you need to press and hold a certain key combination on your tablet while connecting it to your computer. The key combination varies depending on the model of your tablet, but it usually involves the power button and one of the volume buttons. You can try different combinations until LiveSuit recognizes your tablet.
How to flash Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z using LiveSuit?
Before you flash Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z on your tablet, you need to make sure that you have the following things:
A computer running Windows XP or later
A USB cable compatible with your tablet
The firmware file "Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z" downloaded from [here]
The LiveSuit application downloaded from [here]
The ADB drivers for WM8850 tablets downloaded from [here]
Once you have everything ready, follow these steps to flash the firmware on your tablet:
Extract the firmware file "Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z" using a tool like 7-Zip or WinRAR. You should get a file named "WM8850_MID7_PuZhi_W01_W70_8223_1.0.0_120621.img".
Extract the LiveSuit application and run it as administrator. You should see a window like this:
Click on the "Select Img" button and browse to the firmware file "WM8850_MID7_PuZhi_W01_W70_8223_1.0.0_120621.img". Click on "Open".
Click on the "Yes" button when LiveSuit asks you to format your tablet.
Turn off your tablet and make sure it is not connected to your computer.
Press and hold the key combination that puts your tablet in FEL mode. For example, if your tablet has a power button and a volume up button, press and hold both of them at the same time.
While holding the key combination, connect your tablet to your computer using the USB cable. You should hear a sound indicating that your computer has detected a new device.
Release the key combination and wait for LiveSuit to recognize your tablet. You should see a window like this:
Click on the "Yes" button to start flashing the firmware on your tablet.
Wait for LiveSuit to finish flashing the firmware on your tablet. You should see a green progress bar and a message saying "Upgrade successful".
Disconnect your tablet from your computer and turn it on. You should see the boot logo of the new firmware.
Congratulations! You have successfully flashed Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z on your WM8850 tablet. Enjoy your new firmware and explore its features.
Troubleshooting
If you encounter any problems while flashing Wm8850 Mid7 Puzhi W01 8223 Ft5206 W70 Wmc1579.7z on your tablet, here are some possible solutions:
If LiveSuit does not recognize your tablet, try using a different USB cable or port, or reinstalling the ADB drivers for WM8850 tablets.
If LiveSuit fails to flash the firmware on your tablet, try using a different firmware file or version of LiveSuit, or formatting your tablet before flashing.
If your tablet does not boot after flashing the firmware, try resetting it by pressing and holding the power button for 10 seconds, or reflashing the firmware again.
If none of these solutions work, you can ask for help on the GSM-Forum or other online forums where WM8850 users share their experiences and tips.
Disclaimer
Flashing firmware on WM8850 tablets is a risky process that can damage or brick your device if done incorrectly. We are not responsible for any consequences that may arise from following this guide. Flash at your own risk and make sure you backup your data before proceeding.
524038ac18