Embedded Files
If your snow blower not working and you're struggling to get it started, don’t panic! A few simple fixes might be all you need. From checking the fuel to inspecting the spark plug, these easy troubleshooting steps can help get your snow blower up and running again. Here’s how to fix common issues and get back to clearing snow quickly!
Common Snow Blower Issues and How to Fix Them
Common Snow Blower Issues and How to Fix Them
Some of the typical reasons why snow blowers malfunction are listed below. These are some of the common problems that can be easily solved to ensure that the snow blower is up and running again to clear the snow.
1. Check the Fuel
Starting problems can be attributed to old or stale fuel.
How to Fix:
If the fuel in your snow blower has been stagnant for more than 30 days, it may have become stale and block the carburetor.
Replace the old gasoline by syphoning it out. If the machine is to be stored for a long period, it is advisable to add a fuel stabilizer.
2. Inspect the Spark Plug
A bad spark plug is one that is dirty or damaged and can cause the engine not to start.
How to Fix:
If the spark plug is rusted or fouled, it will not produce the spark needed to ignite the fuel in the engine.
Take out the spark plug and scrub it with a wire brush. It should be replaced with a new one if it is cracked or worn out.
3. Clean or Replace the Air Filter
The engine may have trouble starting if the air filter is blocked since it will restrict air flow.
How to Fix:
Air filters are used to filter air, and as dust and other particles build up over time, they become dirty.
Clean the air filter and take it out. If it is too dirty or damaged, it should be replaced to allow the engine to get enough air.
4. Check the Oil Level
Technologically improper oil filling can lead to such issues as starting difficulties and affecting the engine.
How to Fix:
The engine could not start at all if there is insufficient oil.
Ensure that the oil level is low and add some if necessary. The oil should be drained and replaced with new if it is thick or black.
5. Inspect the Carburetor
An unclean or clogged carburetor will prevent the engine from starting.
How to Fix:
The carburetor may be the cause if fuel is not entering the engine.
If necessary, have the carburetor cleaned by a professional, however it is advised to use a carburetor cleaner.
6. Examine the Safety Switch and Fuse
Certain snow blowers have safety features that, in the event that they identify a problem, stop the machine from starting.
How to Fix:
A potential issue that could prevent a machine from starting may be a defective safety switch or a fuse blown.
Check the safety switch to make sure it is in the proper position. If there is a fuse, make sure it is blown and replace it.
If your snow blower is not working and you are having a hard time starting it, do not worry. Some minor adjustments could be enough. These simple Snow Blower Maintenance tips from clearing the fuel line to looking into the spark plug will get your machine working once again. Here are some pointers to deal with typical issues and get back to snow removal as soon as possible!
Written by Allen Rode for WholeToolbox , your trusted source for a variety of top-quality power tool and lawn mower parts, including Snow Blower Not Working, and lawnmower batteries
Page updated
Google Sites
Report abuse