How We Research
Updated: 2026-10-04 · 6 min read · Independent comparison
If you want a wired over-ear headphone with a retro look, Hi-Fi stereo sound and passive noise cancellation for mobile gaming, choose WaigN Black Retro Over-Ear; if you need a decorative silicone bow accessory that customizes the headphones you already own, choose XMTYQ 2.
• WaigN Black Retro Over-Ear — biggest strength: a complete, ready-to-use wired headphone with 32 ohm impedance, 105 dB sensitivity, a 20 Hz–20,000 Hz frequency range, a dynamic driver and an adjustable cushioned over-ear fit.
• WaigN Black Retro Over-Ear — biggest trade-off: it is wired only, with a 3.5 mm jack and passive (not active) noise cancellation, and it lists no battery, so it is tethered to your device.
• XMTYQ 2 — biggest strength: a two-pack of soft, flexible silicone 3D bows that clip onto most over-ear and on-ear headphone bands without blocking controls or changing sound.
• XMTYQ 2 — biggest trade-off: it makes no sound at all. It is an accessory, not a headphone, so it only makes sense if you already own a pair.
• Pick WaigN if you need the actual listening gear for mobile gaming. Pick XMTYQ 2 if you already own headphones and want to dress them up.
This is a straightforward wired headphone built around a vintage aesthetic. The black metal-and-plastic frame, oval over-ear cups and retro styling are the whole point — it looks like something pulled out of a 1980s listening setup, not a modern plastic gaming headset. Underneath the styling, the specs are conventional and sensible: a 32 ohm impedance and 105 dB sensitivity, which is the kind of load most phones and handhelds drive without trouble. The dynamic driver covers 20 Hz to 20,000 Hz, so you get the full standard audible range rather than a bass-only tuning.
The over-ear cushioned design with an adjustable headband is the practical part. Over-ear cups sit around the ear rather than pressing on it, and the adjustable band means you can loosen or tighten the fit during long sessions. Passive noise cancellation is worth being honest about: it means the physical seal of the cups blocks some surrounding sound, not that electronics are actively cancelling noise. For mobile gaming, that is usually enough to take the edge off a noisy room. The inline push-button control on the cord handles playback without you reaching for your phone, and the 3.5 mm jack plugs into most mobile phones and audio devices.
Who should buy it: someone who wants a corded, no-battery, retro-looking headphone for mobile gaming, video, commuting or desk listening, and who values an over-ear fit over earbuds. Who should skip it: anyone who wants wireless freedom, active noise cancellation, or a built-in microphone/voice-chat solution — none of those are in the spec sheet. If you mostly play on a phone with a headphone jack and you like the vintage look, this is the simple, low-fuss choice.
The XMTYQ 2 is not a headphone. It is a two-pack of decorative clip-on bows made from soft, flexible silicone, sized at 2.95" x 2.36" and designed to wrap around the band of most over-ear and on-ear headphones. The 3D bow shape is the feature — it is a tactile, visibly dimensional accessory rather than a flat sticker, and the listing describes it as a coquettish, playful add-on in the blue colorway. The material is the other selling point: skin-friendly and resilient, so it holds its shape and is gentle against the headphone band instead of scratching it.
The universal-fit claim is the part that matters practically. Because the bows are flexible and clip-on, they are meant to sit on the band without covering buttons, sliders or the ear pads, and without affecting the sound or the original comfort of your headphones. That is the real test of any accessory like this, and the design at least targets it directly. The two-pack also means you can use one and keep one spare, or split the pair across two headsets.
Side-by-Side: Which Should You Choose?
• You need working audio → WaigN Black Retro Over-Ear. XMTYQ 2 produces no sound.
• Best for mobile gaming sessions → WaigN Black Retro Over-Ear, thanks to the over-ear sealed fit, 32 ohm/105 dB load and inline push-button control.
• Best for retro style on the headphones themselves → WaigN Black Retro Over-Ear, with its black metal-and-plastic vintage frame.
• Best for customizing headphones you already own → XMTYQ 2. It is purely decorative and designed for that one job.
• Best for a no-battery, always-ready setup → WaigN Black Retro Over-Ear. It is wired via 3.5 mm, so there is nothing to charge.
• Best for a small gift under a budget → XMTYQ 2, a two-pack of soft silicone bows aimed at teens and style-focused users.
• Best for blocking some room noise → WaigN Black Retro Over-Ear, though only via passive cancellation from the cup seal.
• Best if you want zero impact on your current headphones → XMTYQ 2, which is built to sit on the band without touching controls or sound.
For mobile gaming, I would buy the WaigN Black Retro Over-Ear. It is the only one of the two that actually does the job you are shopping for: a 32 ohm, 105 dB wired over-ear headphone with a full 20 Hz–20,000 Hz range, an adjustable cushioned fit and an inline control on the cord. It will not give you wireless freedom or active noise cancellation, and you should check the current price on Amazon before deciding, but as a simple corded gaming and everyday headphone it is the honest pick. The XMTYQ 2 is a nice little accessory — I just would not buy it expecting sound.
FAQ
They are designed for most over-ear and on-ear models and measure 2.95" x 2.36", so they should fit a wide range of bands. They clip on and are meant to avoid covering controls, but check your headphone band size before ordering.
One is a wired headphone; the other is a decorative silicone accessory. The WaigN Black Retro Over-Ear plays audio through a 3.5 mm jack, while the XMTYQ 2 clips onto a headphone you already own and changes only its appearance.
They serve different purposes, so value depends on what you need. If you want to listen, the WaigN headphone is the functional purchase; if you only want to personalize existing gear, the XMTYQ 2 two-pack is the cheaper, simpler add-on. Worth checking current prices on Amazon for both.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: KLIM Nomad Transparent vs PreSonus Eris HD6BT, HyperX Cloud Mix 2 vs Skullcandy Hesh 540 comparison, TECKNET Ear Plugs vs Eixniex Ear Plugs: Noise Isolating, Niecase Bone Conduction Headphones vs Bucephalus Earbuds