How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a plug-and-play wireless listening upgrade with a charging case and no tools required, choose VOLT PLUS TECH V5.3; if you need to repair a dead headphone jack inside a 2020 MacBook Air M1, choose HAWSON A2337.
These two products share a keyword page but almost nothing else. One is a finished pair of Bluetooth earbuds. The other is a single internal replacement part. Reading this comparison as "which earbuds are better" will lead you to the wrong cart, so let's separate them cleanly before you buy.
• VOLT PLUS TECH V5.3 — biggest strength: a complete wireless kit (dual earbuds, power-bank charging case, USB-C cable, three ear adapter sizes) rated for 24 hours of listening with Bluetooth 5.3 and a claimed 6 ms latency.
• VOLT PLUS TECH V5.3 — biggest trade-off: it's a general-purpose audio accessory, not an Apple-specific component; the "compatible with MacBook Pro" wording describes Bluetooth pairing, not a physical fit into any Mac.
• HAWSON A2337 — biggest strength: it's a purpose-built replacement audio board with flex cable for exactly one machine — the MacBook Air M1 Retina 13" A2337 (2020).
• HAWSON A2337 — biggest trade-off: it does nothing on its own. It's a repair part that requires laptop disassembly skills, and it fits no other model.
• Buy VOLT PLUS TECH V5.3 if you want sound, calls and touch controls out of the box.
• Buy HAWSON A2337 if your MacBook Air's 3.5 mm jack has failed and you're comfortable opening the machine.
The V5.3 is a self-contained wireless earbud set. Two in-ear buds sit in a round black charging/storage case that doubles as a power bank, and the bundle ships with a USB-C charging cable, three sizes of ear adapters and a manual. The case itself is small — roughly 2.7 by 0.8 by 1.3 inches and about 2.1 ounces — so it disappears into a jacket pocket or a laptop sleeve. Total item weight is listed at 4 ounces.
On the spec sheet, the interesting numbers are the audio ones. Each bud uses a 28 mm dynamic driver, which is large for an in-ear design, with a 20 Hz–20,000 Hz frequency range, 25.94 ohm impedance, 103 dB sensitivity and a claimed 6 ms audio latency. That combination points to a bass-forward, "Super Bass"-style tuning that's easy to drive from a phone or laptop without a headphone amp. Bluetooth 5.3 handles the connection with a stated 33-foot range, and the battery is rated at 24 hours of average life with a 1-hour charge time. Noise control is listed as active noise cancellation, and the control method is touch, with a multifunctional button on both buds for play/pause, call answer/reject/hang-up and voice assistant activation with Google, Siri or Alexa. The description also mentions voice and AI notifications for incoming calls, battery level and pairing status.
Who should skip it: anyone hoping this fixes a broken headphone jack on a MacBook. Bluetooth pairing and a physical audio-board repair are completely different jobs. Also skip it if you specifically want wired audio through the 3.5 mm port — the V5.3 is wireless only, and its own connection is USB-C for charging, not for listening. And if you need a brand-matched accessory for a specific Mac model, note that "compatible with" here means it pairs over Bluetooth like any other headset, not that it's an Apple part.
HAWSON A2337: Who It's For
The HAWSON A2337 is not a listening device. It's an audio board headphone jack connector with a flex cable, sold as a direct replacement for the MacBook Air M1 Retina 13" A2337 from 2020. It's black, weighs about 2.31 ounces, and its package dimensions are listed at roughly 3.65 by 1.16 by 4.77 inches — that's the box, not the board.
The value here is narrow and precise. If the 3.5 mm jack on that specific MacBook Air has stopped working — no sound, crackling, or a port that no longer detects a plug — this is the part that restores it. HAWSON states each unit is tested before shipping and confirmed working, and the listing is explicit that the buyer must check their computer's year and model before ordering. That warning matters: this board is keyed to the A2337 chassis, and it won't fit other MacBook Air generations or the Pro line.
Who should buy it: someone with a 2020 MacBook Air M1 (A2337) and a dead headphone jack who is comfortable with laptop disassembly and reassembly. The listing is upfront that this is not an easy job for anyone without technical skills, and that you should only buy it if you already know how to install it.
Who should skip it: everyone else. If you don't own that exact machine, this part is useless. If you own it but aren't comfortable opening a laptop, you're better off with an external USB-C audio adapter or a wireless headset — which is exactly where the VOLT PLUS TECH V5.3 comes back into the picture. And if your MacBook Air's jack still works fine, there's no reason to buy a replacement board at all.
Side-by-Side: Which Should You Choose?
• Best for fixing a broken MacBook Air headphone jack → HAWSON A2337. It's the only one of the two that physically addresses a failed 3.5 mm port.
• Best for battery life → VOLT PLUS TECH V5.3. 24 hours of rated listening with a 1-hour charge and a case that doubles as a power bank.
• Best for low-latency audio → VOLT PLUS TECH V5.3. A claimed 6 ms response, which matters for video sync and casual gaming.
• Best for workouts and light weather → VOLT PLUS TECH V5.3. IPX6 water resistance plus in-ear tips in three sizes.
• Best for a single-model repair → HAWSON A2337. Purpose-built for the MacBook Air M1 Retina 13" A2337 (2020) only.
• Best if you have no repair skills → VOLT PLUS TECH V5.3. No disassembly, no tools, no risk of breaking a laptop clip.
• Best for a USB-C-only laptop with a dead jack → either, depending on goal. The HAWSON restores the built-in port; the VOLT PLUS TECH sidesteps the port entirely with wireless audio.
In my opinion, most people searching these two names should buy the VOLT PLUS TECH V5.3. It's a finished product that works the moment you pair it, it covers music, calls, workouts and travel, and it asks nothing of you but a charge. The HAWSON A2337 is the right answer only in one narrow case: you own a 2020 MacBook Air M1 (A2337), the headphone jack is genuinely dead, and you're confident opening the machine. If that's not you, the repair board is money and effort spent on a problem you don't have. If price is the deciding factor, check the current price on Amazon before you commit.
FAQ
No. It's listed as compatible only with the MacBook Air M1 Retina 13" A2337 from 2020. Check your model year before ordering, because it won't fit other Air or Pro generations.
None. It pairs over Bluetooth 5.3, and the package includes the charging case, USB-C cable, ear adapters and manual. It's plug-and-play, unlike the HAWSON part, which requires laptop disassembly.
Not as a repair — it bypasses the port by giving you wireless audio instead. If you specifically want the built-in 3.5 mm jack working again, you need the HAWSON A2337 and the skills to install it.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.