Fronius Magic Wave 2000 Fuzzy Pdf
Download Zip https://fancli.com/2xUmK2
How to Use the Fronius Magic Wave 2000 Fuzzy TIG Welding Rectifier
The Fronius Magic Wave 2000 Fuzzy is a primary transistor-switched TIG welding rectifier that can be used for various welding applications. It has a fuzzy logic control system that automatically adjusts the welding parameters to the optimal values for different materials and thicknesses. It also has a high-frequency ignition system that ensures a reliable arc start without touching the workpiece. The Fronius Magic Wave 2000 Fuzzy can be operated with different remote control units that allow the user to adjust the welding current, pulse frequency, and other settings.
In this article, we will explain how to use the Fronius Magic Wave 2000 Fuzzy TIG welding rectifier, based on the operating instructions manual[^1^]. We will cover the following topics:
Setting up the device
Accessing the program levels
Using the remote control units
TIG welding with high-frequency ignition
TIG welding with contact ignition
Manual electrode welding
Care and maintenance
Troubleshooting
Setting up the device
Before using the Fronius Magic Wave 2000 Fuzzy, make sure that you have all the necessary components and accessories, such as the power supply cable, the gas hose, the torch, the earth cable, and the remote control unit. You also need to have a suitable gas cylinder and a pressure regulator for shielding gas supply. The recommended shielding gases are argon or argon-helium mixtures for TIG welding and carbon dioxide or argon-carbon dioxide mixtures for manual electrode welding.
To set up the device, follow these steps:
Connect the power supply cable to the mains socket and switch on the mains switch on the rear panel of the device.
Connect the gas hose to the gas cylinder and open the cylinder valve. Adjust the pressure regulator to the desired gas flow rate.
Connect the torch to the torch socket on the front panel of the device. Make sure that you use a torch that matches your welding current range and polarity.
Connect the earth cable to the earth socket on the front panel of the device. Attach the earth clamp to a clean and metallic part of your workpiece or workbench.
Connect your remote control unit to the remote control socket on the front panel of the device. Choose a remote control unit that suits your welding application and preference.
Select your welding mode by pressing the mode button on the front panel of the device. You can choose between TIG AC (alternating current), TIG DC (direct current), or MMA (manual metal arc).
Select your ignition mode by pressing the ignition button on the front panel of
the device. You can choose between HF (high-frequency) or LIFT (contact) ignition.
Adjust your welding parameters by using the rotary knob and buttons on
the front panel of
the device or by using your remote control unit. You can change parameters such as welding current, pulse frequency, balance, slope up, slope down, gas pre-flow, gas post-flow, etc.
Accessing
the program levels
The Fronius Magic Wave 2000 Fuzzy has three program levels that allow you to access different functions and settings. The program levels are:
Basic level: This is
the default level where you can adjust
the main welding parameters such as welding current, pulse frequency, balance, etc.
Fuzzy level: This is
the level where you can activate
the fuzzy logic control system that automatically optimizes
the welding parameters for different materials and thicknesses. You can also adjust
the fuzzy factor that determines how much
the fuzzy logic system influences
the welding parameters.
Expert level: This is
the level where you can access advanced functions and settings such as memory locations, job numbers, service codes, etc.
To access
the different program levels, follow these steps:
To enter
the basic 66dfd1ed39
X Hdl 4.2 5 Crack<br>Cpd Gtu Book Pdf Download<br>Bisar 3.0 Shell Software Downloa<br>