Embedded Files
Power Button
Power Button
Located on the BACK LEFT of the machine.
Located on the BACK LEFT of the machine.
"End Study"
"End Study"
If the orange "END STUDY" button is present, click to exit out of the study left open by the prior operator.
If the orange "END STUDY" button is present, click to exit out of the study left open by the prior operator.
"New Patient"
"New Patient"
Click to either manually enter patient information or pull up from the worklist.
Click to either manually enter patient information or pull up from the worklist.
"Worklist"
"Worklist"
If you have already placed an order in O2 for the study, you can pull up the patient information under "Worklist." If you go to Worklist, hit the ↩️ button on the top-right to refresh the list & pull up new orders.
If you have already placed an order in O2 for the study, you can pull up the patient information under "Worklist." If you go to Worklist, hit the ↩️ button on the top-right to refresh the list & pull up new orders.
Manual Patient Info Entry
Manual Patient Info Entry
If Worklist is not used, then manually enter patient information. If there is no MRN (like when you're scanning a co-resident), then enter that person's birthday.
If Worklist is not used, then manually enter patient information. If there is no MRN (like when you're scanning a co-resident), then enter that person's birthday.
Enter Your Info
Enter Your Info
Enter scanner(s) username(s) under "Performing," with multiple scanner usernames separated by a semicolon (no space required). Attending username can be left blank and entered in Qpath, but if known, can be entered under "Referring". For training studies, the attending is "TRAIN." Hit blue "SCAN" button when complete.
Enter scanner(s) username(s) under "Performing," with multiple scanner usernames separated by a semicolon (no space required). Attending username can be left blank and entered in Qpath, but if known, can be entered under "Referring". For training studies, the attending is "TRAIN." Hit blue "SCAN" button when complete.
Probe & Mode Selection
Probe & Mode Selection
Probe & mode change menu is accessed by pressing the left side middle button on the bottom home screen.
Probe & mode change menu is accessed by pressing the left side middle button on the bottom home screen.
Adjusting Gain
Adjusting Gain
Use the wheel to adjust overall gain. If you press the Time Gain Compensation (TGC) button, it will bring up a dial where you can adjust near & far field gain. Hit "Auto" to return to normal gain settings if you get lost.
Use the wheel to adjust overall gain. If you press the Time Gain Compensation (TGC) button, it will bring up a dial where you can adjust near & far field gain. Hit "Auto" to return to normal gain settings if you get lost.
Labels
Labels
Press "ABC" to pull up the labels menu. Can use pre-populated labels, or free text can be entered by pressing the ⌨️ keyboard button. Use the "Select" button and trackpad to select labels for deletion / movement.
Press "ABC" to pull up the labels menu. Can use pre-populated labels, or free text can be entered by pressing the ⌨️ keyboard button. Use the "Select" button and trackpad to select labels for deletion / movement.
Saving & Measuring
Saving & Measuring
Use the camera 📷 & video camera 📹 buttons to save still images and clips. After hitting freeze ❄️, you can use the trackpad to "go back in time" and either save still images with 📷, perform simple measurements with "CALIPER", or calculations with "CALCS" (e.g., crown rump length).
Use the camera 📷 & video camera 📹 buttons to save still images and clips. After hitting freeze ❄️, you can use the trackpad to "go back in time" and either save still images with 📷, perform simple measurements with "CALIPER", or calculations with "CALCS" (e.g., crown rump length).
Changing Modes
Changing Modes
Color, Doppler, and M-Mode are accessed using the buttons on the bottom right. At any time, pressing "2D" will exit you out of specialized mode, freeze frame, dual-screen, etc.
Color, Doppler, and M-Mode are accessed using the buttons on the bottom right. At any time, pressing "2D" will exit you out of specialized mode, freeze frame, dual-screen, etc.
"End Study" When Done
"End Study" When Done
Always press at the end of a study. If missed, next person to use machine may forget also, and their images will be lost in your persistently open study.
Always press at the end of a study. If missed, next person to use machine may forget also, and their images will be lost in your persistently open study.
Cleaning
Cleaning
The ORANGE top (bleach) wipes are approved for all the PX probes, AND the PX machine itself. ANY color wipe is approved for the probes, but should be avoided when wiping down the machine itself.
The ORANGE top (bleach) wipes are approved for all the PX probes, AND the PX machine itself. ANY color wipe is approved for the probes, but should be avoided when wiping down the machine itself.
Google Sites
Report abuse