Gas stoves are a safe and effective option that can be used in daily cooking, however, similar to any other household device, gas stoves may also have issues. Wear and tear, food spills, improper cleaning or lack of care are some of the common issues. No matter whether you are the owner of a small-sized Three burner gas stove or a bigger one, Four burner gas stove, it is worth knowing the global issues and knowing how to solve them to get the performance going once again and to prolong the life of your unit.
A burner which fails to light is one of the most frequent gas stove issues. This normally occurs when food remnants, grease or moisture is blocking the burning ports or ignition system. To remedy this, make sure that the stove is turned off and cooled down, and then the burner caps should be taken out and cleaned off with warm water and a soft bristle. When it is all dry reassemble the parts and attempt to start the burner again. This problem can be avoided through frequent cleaning.
A small or uneven fire may influence the performance of cooking and result in the inequalities of cooking the products. This issue is commonly brought about by obstructions in the holes of burners or improper location of burners. Look at the burner ports thoroughly and clean with a pin or needle. The burner cap should be carefully positioned before the gas is switched on once again. This problem may arise on any model, both a Three burner gas stove, and a Four burner gas stove, in particular, when the spills are not cleaned in time.
Gas smell is a very serious problem, which should not be overlooked. It can be a loose connection, broken gas hose or broken valve. In case of a gas smell, switch off the stove and the major gas supply, air the place and do not use electrical switches. Look at the gas pipe or hose, and check whether or not they are damaged. In case of the persistence of the smell, call upon a professional technician since the repair involving gases could not be done by a lay person because of the safety concern.
When you hear clicking noise but the burner fails to start, then there are chances of having a damp or dirty ignition system. Wetness that comes with cleaning may disrupt the performance of the igniter to spark off. After the stove is totally dry then mop around the igniter using a dry cloth. After drying, the igniter must operate normally and give out a steady flame.
Blue should be the color of a healthy gas flame. A yellow or orange flame could be the result of incomplete combustion in blocked burners or a low air-to-gas ratio. This problem is normally solved by cleaning up the burner ports. In case the issue persists, the air shutter might require some adjustment and this should preferably be done by a professional repair technician. When this problem is disregarded, efficient cooking and the use of less gas may be compromised.
A lot of hard or frozen knobs may make the flame hard to handle. This is usually brought about by the accumulation of grease underneath the knobs. Cautiously take off the knobs and wash the place with some mild soap and water. After drying, re-screw the knobs in place and ensure that they run freely. No one should press rigid knobs because it can break internal parts.
To the extent that several small problems related to gas stoves can be fixed at home, certain problems must be handled by an expert. Continuous smells of gases, broken valves, or internal parts must always be attended to by a skilled technician. Professional service performed at regular intervals may assist in ensuring your stove is safe and in working well, whether it is a three burner gas stove or a four burner gas stove or not.
These gas stove issues are the ones that can be avoided by simple cleaning and proper usage. Early solutions of minor problems are likely to save time, money and guarantee safe preparation. With the right care your gas stove could have a long life of delivering reliable and convenient performance to you.