Embedded Files
The painting and decorating of timber and timber-based materials shall be compatible with the species of timber, provide adequate protection and be suitable for the intended use and location. Prefabricated components and joinery shall be finished to a suitable quality and protected. Preparation for decoration work will dictate the quality of finish.
Ensure mitres and arrises are tightly fitted to reduce the amount of filler required.
Fixings should be driven beyond the surface to allow for filler to be applied.
All timber products require a coat of primer and at least 2 undercoat before gloss/satin wood is applied.
Rub down corners and edges to ensure consistent finish and enable even coating.
Joints must not be visible once decorated.
When joinery is prefabricated, the first coat of gloss or satin should be applied before fixing.
Final coat should be provided in-situ covering fixing elements.
Varnish, stains or oils require at least 3 coats on interior surfaces.
Ensure prefabricated joinery such bay roofs are primed, undercoat and at least one coat of finish is applied prior to installation.
For timber that is not pre-primed or prefabricated, decoration up to at least first coat of finish is applied before follow on trades commence work.
Decoration should be to a consistent finish.
All timbers for external use must have at least a primer coat applied before fitting.
External grade timber should be used to provide adequate protection to the timber.
Provide protection to surrounding areas when applying paint in-situ.
Ensure a clean, sharp finish is achieved.
Page updated
Google Sites
Report abuse