Section 10.1.4

Garage Doors

Garage doors and windows shall be adequate for their purpose. Garage doors must be in accordance with the design and integral personnel doors must meet the minimum fire safety regulation.

  • Roof bracing of 100mm x 25mm installed in accordance with the design.

  • Bracing fixed twice into every rafter.

  • Chevron bracing must be provided at ceiling level.


  • When fitting between the brickwork the wall fixing brackets fit on the rear side of the frame using Hex Headed Self Tapping Screws, (DPIN 011008).

  • Once installed, the garage door should be level and open smoothly and unobstructed.

  • Seal around the frame with an appropriately coloured, external grade sealant.

  • Protection should be left on for as long as possible.