How to reset Belkin WiFi extender

The Belkin WiFi extender’s main motive to repeat the single of Belkin range and it is possible without using any wires or cables, basically, its requirements for improving the range of WiFi signals. Using these methods makes the WiFi network good that people are used. Most of the users think the complete process of Belkin WiFi extender is very tough but it is not.

You just need to keep some important points on your mind and you can easily do this in this article we learn how to perform this activity. Here you got step by step guide to set up Belkin WiFi range extender without using any cable

You must have the following:

• You need a Belkin WiFi range extender first.
• You must have a WiFi network and its wireless router whit (SSID) name & password.

Note: Remember if you are using a network with SSID dual band router 2.4GHz & 5GHz both network bands.

If you want to know about SSID in detail visit here SSID for more information.

• A WiFi acceptable device computer, laptop, tab or smartphone.

Steps to fix it :

It depends upon the wireless device that you are using for troubleshooting. You can clearly show in the image given below it is very easy to do without any problem.

Step 1:

Set the Belkin Range extender near the power point where you router can easily connect it as you can see in the image.

Step 2:

Through your Ethernet Wi-Fi-capable and connect to Belkin.setup.

If you are not able to see the network after connecting it then you must need to reset your Belkin range extender. Resetting your range extender is not a very big task you have to press the reset button most of the range extender has a reset button on their backside and it also depends upon its model. Press the reset button for 10 seconds and wit for restart it may take some time after turning on the device to try to reconnect it.

You have to wait while your device is connected to Belkin. setup before going further for the next step.

Step 3:

Enter "http://belkin.range" this URL in the address bar on your browser and click next.

Step 4:

When the page opens after entering the above URL select to start on that particular page as you can see in the image given below.

Next, it searches your router SSID automatically.

Step 5:

In the next step select that particular network that you want to extend and next once again to complete the process.

If it is not showing on your screen refresh it and try again.

You have to wait for some time to connect the extended network.

Step 6:

When the pop up displayed then enter a strong password for your network and click next.

Again Wait for a minute to complete the setup authenticated password.

Step 7:

If you select two networks then choose the second network to extend and repeat step 6 and click next.

I hope this article helps you to fix the problem of Belkin range extender. if you want to learn How to change Belkin router password. You can visit this blog for more information here you got the complete knowledge about this issue.