Band: JK Technology
Input Power: 220 volt (AC)
Warranty: 01 Year
Payments: Bikash, Rocket, DBBL
Smart Pump Controller will automatically START the-water-pump as soon as the water level falls below the predetermined level and it will SWITCH OFF the-water-pump as soon as the tank is full. Smart Pump controller ensures no overflows or dry running of the pump thereby saves electricity and water. This device will show overhead_water_level, reservoir_water_level and Pump_status on its LCD display.
Some extra feature makes this controller SMART. Test_mode and regular_mode.
**During Test_mode the device continuously checks the water level after 30 seconds. So it decreases installation time.
**In Regular_mode the device continuously checks the water level after 3 minutes. So it Increases the lifetime of water sensors.
**During failure or the disconnect of overhead water sensor the device stops the pump after reach to avg_run : min (max run time)
**The device also shows the real-time signal from the tank, Total ON/OFF of PUMP, Last Running Time, Total Running time.
1. Applicable for home/ office/ industry and more.
2. Single-phase 220v AC. 2200watt max load.
3. Size: 17cm X 12cm X 4cm, 300 grams.
4. Internal voltage: 5vDC, 12vDC and 220vAC
5. Water sensor Voltage: 5v.
6. ON/OFF switch for manual control.
7. Smart LCD display.
8. Five-step water level display On LCD.
9. Internal 30A Relay, N/O, N/C.
10. Control by atmega8 Micro-controller.
11. Load capacity 3 HP maximum.
11. Fully automatic and easy installation.
12. Dual Tank monitoring (overhead + reservoir).
13. Ensure no overflows or dry running.
14. Max Run time limit facilities. (Max:255 minute)
15. Total Run time Counting. (Max: 25599 Hours)
16. Number of totals Start/Stop Count. (Max: 9999)
17. Last Run time Show in minute and second.
18. Sensors and cable status show.
19. One year guarantee.