How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 7 min read · Independent comparison
• talomen Over Ear Headphones — biggest strength: 50mm dynamic drivers with a 10Hz–32kHz frequency response and a closed-back over-ear fit that isolates ambient noise for tracking, mixing and podcasting.
• talomen Over Ear Headphones — biggest trade-off: It's wired only, with no Bluetooth, so you're tethered to your interface, mixer or laptop.
• Rolosar Earbuds — biggest strength: Bluetooth 5.4 with auto-pairing, ENC noise-cancelling mics, and roughly 10 hours per charge (extended to about 50–60 hours via the case).
• Rolosar Earbuds — biggest trade-off: In-ear buds can't match the isolation, driver size or wired reliability of a closed-back studio can.
• Who the talomen is for: podcasters, producers, engineers and anyone recording or editing at a desk.
• Who the Rolosar is for: runners, gym-goers and commuters who want untethered audio and hands-free calls.
The talomen W50X is a wired, closed-back studio monitor headphone, and everything about its design points at desk work. The 50mm neodymium dynamic drivers paired with a 10Hz–32kHz frequency response are the headline: large drivers like these tend to move more air and deliver more low-end detail, which matters when you're checking a podcast mix for rumble, plosives or a muddy low-mid. The 32-ohm impedance and 100dB sensitivity mean it's easy to drive from a laptop or interface without a dedicated amp, though it's clearly built to sit in a chain with mixers, consoles and audio gear.
For podcasting specifically, two features stand out. First, the closed-back enclosure with sound isolation — that's the whole reason a podcaster picks closed-back over open-back: it keeps your monitoring from bleeding into the mic and blocks some room noise so you can actually hear what you're recording. Second, the 90° swiveling ear cups allow single-ear monitoring, so you can keep one ear on your co-host or your own voice in the room while the other stays on the feed. That single-side monitoring trick is genuinely useful in a two-person studio.
Rolosar Earbuds: Who It's For
The Rolosar Q76 is the opposite philosophy: total freedom from cables. Bluetooth 5.4 gives you faster transfer and lower latency than the previous generation, and the auto-connect behavior means opening the case re-pairs to your last device without fiddling. It plays nice with iOS, Android, tablets, laptops and TVs, and the 30-foot range covers a room comfortably.
The audio side uses 14.2mm double-layer diaphragm drivers, which is a large driver for an in-ear bud and usually translates to stronger bass and a fuller low end than tiny single-driver buds. The ENC (environmental noise cancellation) microphones focus on voice pickup, which is why these are pitched as call-friendly — your voice gets transmitted clearly while ambient noise is reduced on the far end.
Where the Rolosar really earns its keep is movement. The flexible soft ear hooks are designed to keep the buds locked in during running, gym work and cycling, and three sizes of ear tips (S/M/L) let you dial in the seal. IP7 waterproofing means sweat, rain and splashes aren't a problem. Battery life is about 10 hours per charge, and the charging case — with a transparent cover and a dual LED display showing case level and bud charging status — extends total listening to roughly 50–60 hours. Type-C charging keeps it simple, and touch controls handle play/pause, track skip, volume, calls and voice assistant.
The honest trade-off: these are in-ear buds, not over-ear cans. They can't isolate like a closed-back studio headphone, they compress the soundstage, and the wireless link adds a variable a wired monitor doesn't have. For critical podcast editing, that's a real limitation.
Side-by-Side: Which Should You Choose?
• Best for podcast recording and editing → talomen Over Ear Headphones. Closed-back isolation, 50mm drivers and single-ear monitoring are exactly what a studio workflow wants.
• Best for critical listening accuracy → talomen Over Ear Headphones. A 10Hz–32kHz wired response with no Bluetooth compression beats a wireless in-ear for reference work.
• Best for workouts, running and sweaty sessions → Rolosar Earbuds. IP7 waterproofing and ear hooks are purpose-built for it; the talomen has no waterproof rating.
• Best for phone calls on the go → Rolosar Earbuds. The ENC mic array is designed for voice clarity; the talomen's inline control is aimed at media playback.
• Best for long desk sessions → talomen Over Ear Headphones. Memory foam cushions and an adjustable headband are made for hours of comfort.
• Best for travel and portability → Rolosar Earbuds. A pocketable case with an LED display is easier to carry than a full over-ear set with a pouch.
• Best for connecting to mixers, interfaces and instruments → talomen Over Ear Headphones. Dual 3.5mm/6.35mm connectors mean no adapters needed.
If I were setting up a podcast, I'd buy the talomen Over Ear Headphones. In my opinion, the closed-back isolation, the 50mm drivers and the 90° swiveling cups for single-ear monitoring are the three things that actually matter when you're tracking and editing spoken word — and a wired connection removes any latency or dropout doubt. The Rolosar Earbuds are excellent at what they're built for, but that's fitness and mobile listening, not studio monitoring. If your podcast work happens at a desk, the talomen is the one I'd reach for. Check the current price on Amazon before you commit, since that's the one thing specs can't tell you.
You need them to monitor your own voice and the mix in real time — to catch plosives, background hum and level problems as they happen, and to keep playback from bleeding back into your microphone. A closed-back design like the talomen's sound isolation is the practical choice for that job, because it blocks room noise and keeps your monitoring contained.
what is the best headphones for podcasting?
There's no single answer, but for desk-based recording the key traits are closed-back isolation, a wide frequency response and comfortable padding for long sessions. The talomen W50X matches all three with its closed-back enclosure, 10Hz–32kHz response and memory foam cushions. If you need wireless instead, the Rolosar Earbuds cover mobile listening and calls, but they're in-ear buds rather than studio monitors.
Good podcast headphones should let you hear detail across lows and highs, isolate you from the room, and stay comfortable through a long recording. The talomen offers 50mm dynamic drivers, 32-ohm impedance and 100dB sensitivity, so it's easy to drive from a laptop or interface. Its detachable 9.8 ft cable and dual 3.5mm/6.35mm connectors also mean it plugs into mixers and gear without an adapter.
Plug the talomen into your interface, mixer or laptop using the 3.5mm or 6.35mm connector, then set your monitoring level so you hear yourself clearly without feedback. Use the 90° swiveling cups for single-ear monitoring if you want one ear on the room. If you're using the Rolosar Earbuds instead, pair them over Bluetooth 5.4 — they auto-connect when you open the case — and use the touch controls for volume and calls.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: FOXXRAY BA-68 vs ATK N9, MZYMI Open Ear Earbuds vs WIVTAK Earbuds: Cycling Earbuds, WEIBEIQI Open Ear Bone vs Hsility IP7, ISOtunes Xtra 2.0 vs INCORIC 6.0