How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a warm, vocal-focused wired IEM with a detachable cable and a heritage design story, choose syeindunce TANGZU Waner S.G; if you need a bass-forward gaming and monitoring earbud with a stable earhook fit and strong passive noise blocking, choose H HIFIHEAR Gaming Earbuds. Both run a 10mm dynamic driver, so the real difference is tuning, fit and cable ecosystem.
• syeindunce TANGZU Waner S.G — biggest strength: an upgraded 10mm PET diaphragm driver plus refined tuning for a smooth, full-bodied, detailed sound, with a 5N OFC braided detachable 0.78mm 2-pin cable.
• syeindunce TANGZU Waner S.G — biggest trade-off: it is built around music listening and comfort rather than noise-blocking or gaming-specific ergonomics, and it uses the less common flat 0.78mm 2-pin connector.
• H HIFIHEAR Gaming Earbuds — biggest strength: a 10mm composite magnetic dynamic driver tuned for punchy bass and vocal-forward presentation, plus an earhook design that blocks roughly 90 percent of ambient noise.
• H HIFIHEAR Gaming Earbuds — biggest trade-off: higher sensitivity and lower impedance (105 dB / 16 ohm) make it more sensitive to noisy sources, and the cable uses 0.75mm 2-pin gold-plated pins rather than 0.78mm.
• Pick the TANGZU Waner S.G if you want a warm, musical IEM for vocals, instruments and everyday listening.
• Pick the H HIFIHEAR Gaming Earbuds if you want a bassy, isolating earbud for gaming, exercise and on-the-go use.
The TANGZU Waner S.G II is the more "listening-first" product of the two. Its core is an upgraded 10mm dynamic driver with a PET diaphragm and a redesigned driver chamber, and the stated goal of that redesign is more clarity and detail while keeping the original model's musical warmth and natural tonality. In practice, that means this is an IEM tuned for smoothness rather than slam — the kind of sound that flatters vocals, acoustic instruments and long, relaxed sessions rather than pounding your ears.
The rest of the package backs that up. The shell was reworked using ear-anatomy research for a secure, ergonomic fit, and it ships with TANGZU's SANCAl eartips for isolation and all-day comfort. The 1.2m 5N oxygen-free copper braided cable uses a flat 0.78mm 2-pin connector, which the brand describes as more stable than the older raised version and easier to swap. You also get a Type-C mic option, so it can work as a headset on a phone or laptop, and there's a 1-year warranty.
Who should buy it: listeners who care about tonality and detail, people who like swapping cables, and anyone who wants a single wired IEM that handles music and casual calls. Who should skip it: if your priority is maximum bass impact, gym-proof earhooks, or the widest possible accessory ecosystem, the 0.78mm flat connector and music-first tuning may not be what you want.
The H HIFIHEAR Gaming Earbuds (CCZ NC02) leans the other way. Its 10mm composite magnetic dynamic driver is explicitly tuned for a bass-forward, vocal-forward balance with clear instrument separation, and the strong magnetic force is there to boost low-frequency density. The brand positions it for pop, rock and EDM, and describes punchy bass with mellow vocals and a clear mid-high range. If you want a fun, energetic signature rather than a neutral one, this is the pick.
The design tells you the intended use. A stable earhook keeps the buds in place during exercise or travel, and the passive noise cancellation is claimed to block around 90 percent of ambient noise — a big deal in a noisy room, on a train, or during a game where you need to hear footsteps and callouts. The cable is an upgraded 5N silver-plated OFC with anti-interference braided shielding, a tangle-reducing double parallel wire layout, and standard 0.75mm 2-pin gold-plated connectors for easy replacement. The housing mixes a metal cover with a lightweight polycarbonate shell, and it uses a standard 3.5mm plug. Warranty runs 12 months, extendable to 24 months through the brand.
Who should buy it: gamers, gym-goers, commuters and stage or studio users who want isolation and a lively low end. Who should skip it: critical listeners who want the most neutral, warmth-focused tuning, and anyone who specifically needs a 0.78mm 2-pin cable ecosystem.
Side-by-Side: Which Should You Choose?
• Best for bass and EDM → H HIFIHEAR Gaming Earbuds. The composite magnetic driver is explicitly built for low-frequency density and punch.
• Best for gaming and exercise → H HIFIHEAR Gaming Earbuds. The earhook design and roughly 90 percent ambient-noise blocking are made for movement and immersion.
• Best for noise isolation → H HIFIHEAR Gaming Earbuds. It uses passive noise cancellation plus earhooks; the TANGZU relies on SANCAl eartips and fit.
• Best for all-day comfort and fit tuning → syeindunce TANGZU Waner S.G. The shell was redesigned around ear-anatomy research for a secure ergonomic fit.
• Best for cable swapping → depends on your ecosystem. TANGZU uses flat 0.78mm 2-pin; H HIFIHEAR uses standard 0.75mm 2-pin.
• Best for wired headset calls on a phone or laptop → syeindunce TANGZU Waner S.G. It offers a Type-C mic variant and remote controls.
• Best for plug-and-play with older gear → H HIFIHEAR Gaming Earbuds. It uses a plain 3.5mm jack with volume control.
In my opinion, I would buy the syeindunce TANGZU Waner S.G if music listening is the main job. The 10mm PET diaphragm, the smoother tuning and the detachable 5N OFC cable give it a more refined, long-term-listening feel, and the Type-C mic option makes it more versatile for calls.
But if you game, train or commute in noisy places, I would pick the H HIFIHEAR Gaming Earbuds. Its earhook fit, strong passive isolation and bass-forward 10mm driver match those jobs better. For most buyers torn between the two, the deciding question is simple: do you want warm detail or punchy immersion? Check the current price on Amazon before you commit, since both sit in the budget IEM space.
FAQ
what is 10mm driver earbuds
is 6mm driver good for earbuds
A 6mm driver is a smaller dynamic driver, and smaller drivers generally move less air, which usually means less bass weight than a 10mm unit. Neither product in this comparison uses a 6mm driver — both are 10mm, which is the more common size for fuller low-end output in budget IEMs.
is 10mm driver good for earbuds
Yes, a 10mm driver is a good all-round size for earbuds. It can deliver solid bass and detail without needing much power, which is why both the TANGZU Waner S.G and the H HIFIHEAR Gaming Earbuds use one. The tuning and housing matter just as much as the driver size.
For gaming, I would lean toward the H HIFIHEAR Gaming Earbuds. Its earhook fit stays put, its passive noise blocking is rated at around 90 percent of ambient noise, and its bass-forward tuning suits game audio. The TANGZU Waner S.G is more of a music-first IEM.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ELFRhino Cord Organizer Tangle-Free vs Maeline Bulk Earbuds 10, TANCHJIM Bunny vs Linsoul Kiwi Ears x, Toperson USB C Headphones vs Smilebridge Apple MFi Certified, ASKUBSKU Headphones Earphones vs Boodlab Kids 3-in-1