How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wired in-ear headset that keeps your phone's signal clean and works with basically any device that has a 3.5mm jack, choose SYB Shield; if you need a replacement in-ear headset built specifically for the PlayStation VR2 and its 3D audio, choose REEYEAR PSVR2.
• SYB Shield's biggest strength: universal 3.5mm wired compatibility plus built-in mic, volume control and playback buttons, so it works with phones, tablets, laptops and anything else with a standard audio jack.
• SYB Shield's biggest trade-off: no active noise cancellation, and its whole pitch is about air-tube EMF shielding rather than high-fidelity gaming audio.
• REEYEAR PSVR2's biggest strength: a purpose-built fit for the PlayStation VR2 only, with noise-isolating memory-foam eartips and a flexible gooseneck plug designed around that headset.
• REEYEAR PSVR2's biggest trade-off: it is not a general-purpose headset. It's sold as one earbud, it won't fit other VR versions, and it isn't an OEM product.
• Pick SYB Shield if you want one wired in-ear headset for everyday calls, travel and workouts.
• Pick REEYEAR PSVR2 if you own a PSVR2 and want a replacement in-ear option instead of the attach-style headphone.
The SYB Shield is an in-ear, wired headset with a 3.5mm jack, an 8mm dynamic driver and a 20Hz–20kHz frequency range at 16 ohm impedance. In plain terms, that's a low-impedance, easy-to-drive earbud that a phone or laptop can power without any extra amp. The design story here is the air tube: the brand's stated goal is to retain your phone's signal and battery life with no interference to calls and messages, rather than to chase audiophile tuning.
What makes it genuinely practical is the control set. There's a built-in microphone, volume control, and audio buttons with one-touch call answering and playback control, so you're not pulling your phone out mid-walk. You get three sizes of air-tube earbuds, which matters because in-ear fit is personal, and a carrying case to keep the whole thing together in a bag. The item weight is listed at 21g and the case is black plastic, so it's a light, pocketable kit.
Who should buy it: anyone who wants a single wired in-ear headset that travels across devices, takes calls, and is built around reducing EMF exposure from the phone in your pocket. I'd point frequent callers, commuters and light exercisers here. Who should skip it: if you want active noise cancellation, this one lists noise control as none. And if your main goal is VR gaming audio, this isn't aimed at that at all.
The REEYEAR PSVR2 is a different animal entirely. It's an in-ear replacement earbud made for the PlayStation VR2 and, per the specs, compatible with that headset only, not other versions. It uses a balanced armature driver rather than a dynamic one, and the brand frames it around a high-fidelity, crystal-clear stereo experience for VR gaming, with a sound-isolation design rather than active cancellation.
The comfort angle is the interesting part. It's listed at 0.02 kg, essentially featherweight, and the pitch is that it doesn't add the extra weight of an attach-style headphone. The eartips use soft memory foam with noise isolation, which the brand says reduces distortion, holds the ear securely and boosts bass without hurting voice quality. There's also a flexible gooseneck plug with a gold-shielded 3.5mm jack, which is a sensible detail for something that lives inside a VR headset where cables get tugged.
Two things to be clear about. The package includes one earbud only, so if you need a pair you'll want to plan for that. And it is explicitly not an OEM product, though installation follows the same procedure. Who should buy it: PSVR2 owners who find the stock attach headphones heavy or uncomfortable and want a lighter in-ear alternative with isolation. Who should skip it: anyone without a PSVR2, and anyone who wants a mic, inline controls or multi-device use, because this is a single-purpose VR part.
Side-by-Side: Which Should You Choose?
• Best for device compatibility → SYB Shield. Standard 3.5mm jack, works with any device that has one. The REEYEAR is locked to PSVR2.
• Best for VR gaming on PSVR2 → REEYEAR PSVR2. Purpose-built fit, gooseneck plug, memory-foam isolating tips.
• Best for blocking outside sound → REEYEAR PSVR2. It lists sound isolation; the SYB Shield lists noise control as none.
• Best for long VR sessions → REEYEAR PSVR2. At 0.02 kg it's designed not to add headset weight.
• Best for everyday carry → SYB Shield. Three earbud sizes and a carrying case make it a grab-and-go kit.
• Best for driver design → depends on your ear. SYB uses an 8mm dynamic driver (punchier, typical for everyday listening); REEYEAR uses a balanced armature (detail-focused, common in gaming headsets).
• Best for a specific concern about phone radiation → SYB Shield. The air-tube design is the entire point of the product.
In my opinion, most people shopping this comparison should buy the SYB Shield. It's the flexible one: any 3.5mm device, a mic, inline volume and playback controls, three earbud sizes and a case. It covers calls, commuting, workouts and desk use without you thinking about it. If you specifically own a PlayStation VR2 and want a lighter, isolating in-ear replacement for the attach headphones, I'd buy the REEYEAR PSVR2 instead, because it's built for exactly that job and the SYB isn't. Buy for the job, not the label.
what is in ear headset
An in-ear headset is a headphone whose earpieces sit inside your ear canal rather than resting on or around your ear. Both products here are in-ear designs with a 3.5mm wired jack. In-ear fit generally means a smaller, lighter earpiece, which is why both brands lean on fit and eartip comfort in their descriptions.
what is over ear headset
An over-ear headset has cups that surround your whole ear, usually with a headband and much more bulk. Neither product on this page is over-ear; both are in-ear. The REEYEAR's whole argument is that it avoids the extra weight of the attach-style headphone that sits over the ear on a VR headset.
how to wear one ear headset
You place the earpiece into your ear canal so the tip seals gently, then adjust the angle until it feels secure and the sound is even. The SYB Shield ships with three air-tube earbud sizes so you can pick the one that seals best. The REEYEAR uses soft memory-foam tips that the brand says hold the ear securely without slipping.
what is over ear headset vs in ear headset for VR
For VR, in-ear options like the REEYEAR PSVR2 are about staying light and isolating game audio, since it's made for the PSVR2 only. Over-ear designs trade that lightness for bigger cups and more bulk. If you want one headset for VR and everything else, the SYB Shield's universal 3.5mm jack is the more versatile pick.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: 1Mii B06TX+ vs YOCOWOCO USB-C, headphones for audiophiles, Csasan Sports Earbuds vs Kuizil Earbuds: Wireless Headphones, sennheiser vs sony headphones