We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-19 · 6 min read · Independent comparison
If you want a complete, reference-tuned studio headphone that lets you hear exactly what your mix is doing, choose Superlux HD668B; if you need to bring a worn-out pair of Beats Studio 2 or Studio 3 back to life with fresh, thicker cushions, choose SoloWIT Replacement Ear Pads. These two products barely compete for the same job, and that's the whole point of this comparison — I'll help you figure out which job is actually yours.
• Superlux HD668B — biggest strength: A semi-open, reference-tuned design with 50mm neodymium drivers covering 10–30kHz, built for critical listening and mix decisions rather than casual background music.
• Superlux HD668B — biggest trade-off: That revealing clarity cuts both ways. On already-bright recordings, the upper mids and treble can sound forward, so some listeners will want a warmer source or a touch of EQ.
• SoloWIT Replacement Ear Pads — biggest strength: Extra-thick, slow-rebound memory foam wrapped in soft protein leather, designed to conform to your ears and restore comfort and bass response on Beats Studio 2 and Studio 3.
• SoloWIT Replacement Ear Pads — biggest trade-off: It's a repair part, not a headphone. It does nothing on its own and only fits specific Beats Studio models.
• Who each pick is for: Choose the HD668B if you produce, record or mix; choose the SoloWIT pads if you already own Beats Studio 2 or Studio 3 headphones and the cushions are the problem.
The HD668B is a wired, over-ear studio headphone with a semi-open enclosure. That semi-open design is the detail that matters most: it lets air move, which supports clearer left-right placement and better separation between layers in a mix. If you're checking panning, reverb tails or how deep the room feels in a track, that openness is genuinely useful. Closed headphones tend to trap everything into a tighter, more claustrophobic picture; the HD668B deliberately doesn't.
Comfort and setup are handled thoughtfully. The auto-adjusting headband and 7.8-ounce weight suit long sessions, and the single-sided detachable cable comes in both 1m and 3m straight lengths, plus a cable clip. That means one headphone covers a short desk run and a longer studio reach without a tangle. Connection is a 3.5mm jack, and the package includes an adapter, cable, headphone and user manual, with a 1-year manufacturer warranty.
Buy it if: you produce, record, mix or do post-production and want an analytical reference headphone for placement, EQ and edit checks. Skip it if: you mainly want a warm, forgiving headphone for casual listening, or you need the isolation of a closed-back design for tracking in a loud room.
SoloWIT Replacement Ear Pads: Who It's For
The SoloWIT pads solve a completely different problem. They're replacement cushions for Beats Studio 2 and Studio 3 headphones, wired and wireless versions included. If your current pads are flaking, flattened or uncomfortable, this is the fix — not a new headphone.
The core upgrade is the extra-thick, slow-rebound memory foam. Slow-rebound foam gradually conforms to the shape of your ears rather than fighting them, which matters for two reasons: comfort over long listening sessions, and a better seal. A better seal generally means stronger bass and more effective noise isolation, which is why the padding is described as supporting both. The outer material is soft protein leather in a Sand Dune color, so it's a tactile upgrade over cracked or hardened stock cushions.
Installation is meant to be painless. SoloWIT includes a triangle opener tool so you can pry off the old pads and seat the new ones without guesswork — the fiddly part of pad swaps is usually the prying, and the tool addresses that directly. Each order is one count (a set of pads), and it's worth noting the warranty description is "No," so you're relying on the seller's stated willingness to handle replacements or refunds if something's wrong with your purchase.
Side-by-Side: Which Should You Choose?
• Best for mixing, editing and critical listening → Superlux HD668B. The reference tuning, semi-open imaging and 50mm drivers exist for exactly this.
• Best for reviving an existing pair of Beats → SoloWIT Replacement Ear Pads. They're built for Studio 2 and Studio 3, nothing else.
• Best for long-session comfort → Tie, but for different reasons. The HD668B uses an auto-adjusting headband and light 7.8-ounce build; the SoloWIT pads use thick slow-rebound memory foam that molds to your ears.
• Best for noise isolation → SoloWIT Replacement Ear Pads. The HD668B is explicitly semi-open and lists no noise control, so it leaks and lets sound in by design.
• Best for cable flexibility → Superlux HD668B. Detachable single-sided cables in 1m and 3m, plus a clip, cover both desk and studio setups.
• Best for detail retrieval → Superlux HD668B. The 10–30kHz range and fast transients are tuned to expose flaws, not hide them.
• Best for someone who already likes their headphones → SoloWIT Replacement Ear Pads. If the sound is fine and only the cushions are worn, replacing pads is the smarter move.
• Best for a first serious headphone purchase → Superlux HD668B. It's a complete, self-contained tool; the SoloWIT pads assume you already own the headphone they fit.
If I had to pick one, I'd buy the Superlux HD668B. In my opinion it delivers far more as a standalone product — a complete reference headphone with 50mm drivers, semi-open imaging, detachable 1m and 3m cables and a 1-year warranty, all aimed at people who actually make and check audio. The SoloWIT pads are excellent at what they do, but only if you already own Beats Studio 2 or Studio 3 and simply need better cushions. If that's your situation, buy the SoloWIT pads without hesitation. If you're starting from nothing and want a headphone, the HD668B is the one I'd reach for.
It can be, but it's tuned for analysis. The specs note that on already-bright material the upper mids and treble may sound forward, so if you want a warm, forgiving sound, this isn't the design for that. It's happiest when you're listening critically.
Based on the compatibility data, no. They're listed for Beats Studio2, Studio3 and Studio 2/3 wired and wireless models specifically. Check your model before ordering.
The SoloWIT pads. The HD668B is a semi-open design with no noise control, so it intentionally lets sound in and out. The SoloWIT pads use thick memory foam to improve seal and isolation on the Beats they fit.
Since both products serve different purposes, compare each against its own job — a full headphone versus a replacement part. Check the current price on Amazon using the button on this page before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.