How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to plug a 3.5mm headset into an Xbox 360 controller and actually hear chat and game audio, choose Sudroid 3.5mm; if you need a sturdy desk stand that keeps your controllers and headset organized and off the floor, choose ANSHAWTIY Gaming Controller Holder.
• Sudroid 3.5mm — biggest strength: It solves one very specific problem well. A 2.5mm male plug goes into the Xbox 360 controller, and dual 3.5mm female jacks split your mic and headphone signals into separate ports.
• Sudroid 3.5mm — biggest trade-off: It is a single-purpose adapter with a single purpose. If your gear isn't Xbox 360-era, or your headset terminates in a single TRRS plug, there's nothing here for you.
• ANSHAWTIY Gaming Controller Holder — biggest strength: An aluminum alloy, four-layer, 360-degree rotatable stand that holds multiple controllers plus a headset and small accessories at once, with an anti-slip rubber base underneath.
• ANSHAWTIY Gaming Controller Holder — biggest trade-off: It stores and displays your gear; it does not connect, charge, or transmit any audio signal. It is furniture, not electronics.
• Who each pick is for: Sudroid 3.5mm is for the Xbox 360 owner who wants headset chat working again. ANSHAWTIY is for anyone with a growing pile of controllers and a headset that keeps ending up on the desk.
This is a tiny black adapter, about 4.5 by 3.3 by 1.7 cm, and its whole reason for existing is the Xbox 360 controller's 2.5mm port. That round jack on the bottom of the 360 gamepad was never a standard headphone socket, which is why a plain 3.5mm headset can't just plug in. Sudroid's converter bridges that gap: a 2.5mm male plug on one end, and two 3.5mm female jacks on the other, one for mic and one for headphones. Because those inputs are separate, the adapter carries both input and output audio signals through the controller so you can hold a conversation over the headphone port.
Who should buy it? The person still playing on an Xbox 360 who wants to use a 3.5mm headset with mic for voice chat. That's the core audience, and if that's you, this is a clean, low-fuss solution with no battery and no plug of its own to worry about.
Who should skip it? Almost everyone else. If you're on an Xbox Series console, PS5, PS4 or Switch, this adapter is irrelevant — those controllers don't use a 2.5mm jack, and Sudroid's own guidance is blunt about it: confirm compatibility before buying, because the interface is specifically 2.5mm male plus dual 3.5mm female. If your headset ends in one combined TRRS plug rather than separate mic and headphone plugs, the two-jack layout may not match up either. Sudroid also suggests wiping the adapter ports and your device's ports before inserting, since dust can affect performance — a reminder that this is a small, precision-fit part, not a rugged accessory.
Picture your desk after a long session: two controllers stacked on top of each other, a headset draped over the edge of a monitor, cables everywhere. The ANSHAWTIY stand is built to end exactly that. It's made of polished aluminum alloy in a silver finish, which the specs describe as sturdy, durable and resistant to deforming or damage under daily use. That matters more than it sounds — a plastic stand flexes and eventually cracks, while a metal one just keeps holding.
The design gives you four layers (the listing title says four layers; the build description calls out three independent storage layers plus the riser structure). Either way, the intent is the same: multiple gamepads, a headset, and small gaming accessories can all sit on it at once, which is a real upgrade over a single hook. The rotating joints let you angle the stand however you like, so whether you're sitting upright or lounging back, you can position it where it's actually reachable. Underneath, a wide anti-slip rubber pad keeps the whole thing planted on a desk or floor instead of skating around when you grab a controller in a hurry. It's listed as compatible with Xbox, PS5, PS4 and Switch Pro controllers and accessories, so it isn't tied to one console ecosystem.
Who should buy it? Anyone whose gaming gear has outgrown the desk — especially multi-console households, or people who want their headset off the floor and their controllers visible and grab-ready. ANSHAWTIY also lists a 2-year warranty, which is uncommon at this category and worth noting if longevity is your concern.
Who should skip it? If you own one controller and hang your headset on a hook you already like, this is more stand than you need. And if what you actually want is a way to get headset audio working through a controller, this does nothing for you — it holds hardware, it doesn't connect it.
Side-by-Side: Which Should You Choose?
• Best for desk organization → ANSHAWTIY Gaming Controller Holder. Four layers, rotatable joints, holds controllers plus a headset plus accessories.
• Best for durability → ANSHAWTIY. Aluminum alloy construction versus a small plastic-bodied adapter; the stand is built to take daily bumps.
• Best for a single, narrow fix → Sudroid. One plug, two jacks, done. No assembly, no footprint on your desk.
• Best for multi-console setups → ANSHAWTIY. It's spec'd for Xbox, PS5, PS4 and Switch Pro gear, so it doesn't care what you play on.
• Best for people who hate clutter → ANSHAWTIY. The three-tier layout exists specifically to clear the desk.
• Best if you're unsure about compatibility → neither, until you check. Sudroid explicitly warns you to verify your ports first; ANSHAWTIY's universal fit is broader but still worth confirming against your specific controller.
• Best for price-sensitive shoppers → check the current price on Amazon for both. The two products don't compete on the same need, so value depends entirely on which problem you're solving.
These two barely compete — they solve different problems, and that's the honest takeaway. In my opinion, if your Xbox 360 headset chat is dead and you want it back, the Sudroid 3.5mm is the pick; it's the only one here that does the job, and it does it with a simple 2.5mm-to-dual-3.5mm design. If your problem is a messy desk and gear that never has a home, I'd take the ANSHAWTIY stand instead — aluminum build, rotating joints, and enough capacity for a whole household's controllers. Buy the one that matches your actual frustration.
how to connect xbox headphones
On an Xbox 360 controller, the connection runs through the controller's 2.5mm port, which is why an adapter like the Sudroid 3.5mm exists: its 2.5mm male plug goes into the controller, and your headset's mic and headphone plugs go into the two 3.5mm female jacks. Because those inputs are separate, both input and output audio pass through. Confirm your device's ports match before buying, and wipe the ports clean first.
how to make xbox headphones louder
Volume on a controller-based headset setup is handled by the console and headset, not by the adapter or stand — the Sudroid 3.5mm only transmits signals, and the ANSHAWTIY stand carries none at all. Start with your console's chat and volume settings, then check any inline control on your headset. If audio is faint or one-sided, reseat the plugs and clean the ports, since dust can affect the adapter's performance.
how to pair xbox headphones
Wired headsets of the kind these products relate to don't pair — they connect physically. On Xbox 360 that means the 2.5mm controller port plus a compatible adapter, since standard 3.5mm plugs won't fit directly. Wireless headsets, by contrast, pair through the console's own accessory menu. If you're using a wireless set, neither the Sudroid adapter nor the ANSHAWTIY stand is part of that process.
how to use xbox headphones
Plug in, then route your audio: a 3.5mm headset goes through an adapter like the Sudroid 3.5mm into the Xbox 360 controller's 2.5mm jack, with mic and headphone plugs in their own jacks. From there, chat and game audio come through the controller. When you're done, that's where a stand like the ANSHAWTIY comes in — it gives the headset and controllers a place to sit instead of the desk or floor.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: playvital 4 vs TEMUORG Hanging Controller Holder, BlueFire 3.5mm vs Toeasor Replacement A50: Gaming Headphones, TEMUORG Hanging Controller Holder vs UPERGO Headphone