How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want replacement earpads that bring a genuine luxury upgrade to a pair of Marshall Major headphones, choose SOULWIT Replacement Ear Pads; if you need fresh pads for a Sony WH-1000XM3 noise-cancelling headset, choose Elecphbo Replacement 1000XM3.
• SOULWIT's biggest strength: premium protein leather and high-density foam, sold specifically as a comfort and durability upgrade for Marshall Major I/II/III/IV headphones.
• SOULWIT's biggest trade-off: it is a single-model-family fit — if you own anything other than a Marshall Major, this pad is not for you.
• Elecphbo's biggest strength: it is purpose-built for the Sony WH-1000XM3, with memory foam and a silver finish that matches the headset's own look.
• Elecphbo's biggest trade-off: the listing carries far less detail about the foam density and leather grade than SOULWIT's, so the "luxury" claim is thinner on paper.
• Pick SOULWIT if you own Marshall Major headphones and want a like-for-like comfort upgrade in burgundy.
• Pick Elecphbo if you own a WH-1000XM3 and need a replacement pad that preserves the noise-cancelling over-ear fit.
SOULWIT sells these pads as an upgrade, not just a spare part, and the spec sheet backs that framing up. The cushions are built from a softer grade of protein leather wrapped around high-density foam — the two materials that decide whether an on-ear or over-ear headphone feels plush after an hour or feels like a clamp. High-density foam is the part that matters long term: low-density foam collapses and flattens, while denser foam springs back, which is why SOULWIT describes the pads as staying resilient over time. That is the whole pitch. It is a comfort-and-durability play.
The fit is narrow and deliberate. These pads are designed for the Marshall Major family — Major I, II, III and IV, in both wired and wireless versions. That lineage is famous for its on-ear, rock-and-roll styling, and the stock pads are the first thing that wears out on a headphone like that: the leather flakes, the foam goes soft, and the headset starts to feel loose and cheap. Swapping in a fresh set restores the original feel and, in my opinion, arguably improves on it, because SOULWIT is explicitly using softer leather and denser foam than a typical stock pad.
The color is worth calling out too. These come in Burgundy — a rich, deep red that suits the Major's retro aesthetic far better than a generic black pad would, and it gives you a way to personalize a headphone you already like. SOULWIT also claims the pads conform to your ears without hurting sound quality or noise cancellation, which is the right claim to make: a pad that seals properly should not colour the tuning. Installation is covered by an included user guide and, per SOULWIT, usually takes about three minutes.
Who should buy it: anyone with Marshall Major I/II/III/IV headphones whose original pads have flattened, cracked or lost their grip, and anyone who wants a comfort upgrade in a colour that actually looks intentional.
Who should skip it: anyone who does not own a Marshall Major. The compatibility list is explicit, and SOULWIT asks you to confirm your model before buying — so do that. If you own a Sony, a Bose or anything else, this pad simply will not fit, no matter how good it looks.
Elecphbo's pad is aimed at one headphone and one headphone only: the Sony WH-1000XM3. That is a smart, narrow target, because the XM3 is one of the most widely owned noise-cancelling over-ear headsets out there, and its pads are its most perishable component. The earcups take all the pressure, absorb all the sweat, and after a couple of years of commuting they flatten out — at which point the noise cancelling gets noticeably weaker, because the seal is what the ANC circuit depends on. A replacement pad is not cosmetic maintenance on a headphone like this. It is functional maintenance.
The spec sheet tells you the essentials: memory foam as the enclosure material, a silver finish, and dimensions of roughly 6.22 x 4.06 x 1.54 inches per pad. Memory foam is the right choice here — it is the material that slowly conforms to the shape of your ear and skull rather than pushing back against it, which is exactly what you want on a headphone designed for long listening sessions on flights, trains and open-plan offices. The silver colour also lines up with the XM3's own silver-grey body, so the pads will not look like an obvious aftermarket patch job.
What the sheet does not tell you is as important as what it does. There is no stated leather grade, no foam density figure, and no claim about preserving noise-cancelling performance — the kind of language SOULWIT includes. The listing describes the material as "luxury soft leather memory foam," but that is a description, not a specification. In my opinion, that makes Elecphbo the more utilitarian of the two: a competent, correctly shaped replacement pad rather than a marketed upgrade.
Who should buy it: Sony WH-1000XM3 owners whose original pads have gone flat, cracked or shiny, and who want to restore the seal, the comfort and the noise cancelling without changing the look of the headset.
Who should skip it: anyone without a WH-1000XM3, and anyone expecting a documented step up in leather quality or foam density — the sheet does not promise one.
• Best for a genuine material upgrade → SOULWIT. Softer protein leather plus high-density foam is a specific, stated improvement over stock.
• Best for restoring noise cancelling → Elecphbo. The WH-1000XM3's ANC depends on a good seal, and a fresh memory-foam pad in the correct dimensions restores it.
• Best for colour matching → it's a tie, by different logic. SOULWIT gives you Burgundy as a deliberate style choice; Elecphbo gives you Silver to blend into the XM3's own finish.
• Best for installation confidence → SOULWIT. An included user guide and a stated three-minute install is more hand-holding than Elecphbo's sheet offers.
• Best for long listening sessions → Elecphbo. Memory foam is the material built for slow, even pressure distribution over hours.
• Best documented durability story → SOULWIT. "High-density foam" and "remain resilient over time" is a concrete claim; Elecphbo's sheet stays quiet on longevity.
• Best for Marshall Major owners → SOULWIT, no contest. Major I/II/III/IV, wired or wireless.
• Best for Sony WH-1000XM3 owners → Elecphbo, no contest. It is the only one of the two that fits.
If I owned a pair of Marshall Major headphones, I would buy the SOULWIT pads — the burgundy protein leather and high-density foam are the more convincing luxury upgrade of the two, and the fit list is unambiguous. If I owned a Sony WH-1000XM3, I would buy the Elecphbo pads, because they are the only option here that fits, and memory foam is the right material for that headphone's long-session, noise-cancelling use case. Neither is a universal pick. Match the pad to the headphone you actually own, and check the current price on Amazon before you commit.
what are high end headphones
High-end headphones are models built around premium materials and better engineering — think denser earpad foam, softer leather, tighter tolerances and, often, active noise cancelling. The WH-1000XM3 sits in that noise-cancelling tier, which is exactly why a worn pad hurts it more than it would hurt a cheap headset.
what are the best luxury headphones
"Best" is subjective, but the luxury signal is usually in the materials: protein or memory foam, soft leather, and pads that stay resilient instead of collapsing. Both pads here chase that idea — SOULWIT explicitly, with softer protein leather and high-density foam, and Elecphbo through its memory-foam build.
what are considered high end headphones
Headphones with premium build materials, over-ear or on-ear designs, and features like active noise cancelling or carefully tuned drivers. Marshall Major models and the Sony WH-1000XM3 both qualify in their respective niches, which is why replacing their pads with quality foam is worth doing rather than settling for the cheapest option.
what are some high end headphones
The Marshall Major I/II/III/IV line and the Sony WH-1000XM3 are two widely known examples — one styled and on-ear, one noise-cancelling and over-ear. SOULWIT makes pads for the Marshall family; Elecphbo makes pads for the XM3. Buy the one that matches your headphone.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: over ear headphones with mic, LEEMC Earbuds vs LINGUARA AI Translation Earbuds, APPHOME Headphone Stand Hanger vs QWORK Wood Headphone Stand, MOSWAG Headphones vs Fhumsh Open Ear Headphones