How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to refresh a pair of Sony WH-1000XM3 you already own, choose SOULWIT Professional Earpads Cushions; if you need a complete, ready-to-use over-ear headphone with active noise cancellation, choose JMTCtech Over. These two products solve completely different problems, and picking the wrong one just wastes your time.
• SOULWIT Professional Earpads Cushions — biggest strength: high-density memory foam with softer protein leather in an added-thickness cut, so it seals around the ears for comfort and noise isolation while keeping your existing XM3 alive.
• SOULWIT Professional Earpads Cushions — biggest trade-off: it is a replacement part, not a headphone. It only fits the WH-1000XM3, and it does nothing for you if you don't already own that model.
• JMTCtech Over — biggest strength: a full standalone headphone with three ANC modes, a rated -45dB reduction, a 40mm dynamic driver, and up to 160 hours of playtime in normal mode.
• JMTCtech Over — biggest trade-off: it's a self-contained headset, so it can't repair or upgrade a Sony you already have, and its comfort/portability story is built around a foldable design rather than a premium replacement ecosystem.
• Who each pick is for: SOULWIT for WH-1000XM3 owners whose pads are worn, flat, or peeling. JMTCtech for someone who needs a whole new pair of ANC over-ears for travel, commuting, or desk work.
Think of the SOULWIT Professional Earpads Cushions as a maintenance upgrade rather than a new purchase. The whole point is that your WH-1000XM3's original cushions have flattened, cracked, or started flaking — and instead of replacing the headphones, you swap the pads. SOULWIT builds these from high-density memory foam wrapped in a softer protein leather, and the pads are deliberately cut with added thickness. That extra thickness is the design decision that matters: a thicker, softer pad seals around the ear more completely, which is exactly how you get the comfort-and-isolation balance SOULWIT is aiming for. In my opinion, this is the cleanest reason to buy them — a tired headphone with fresh, thick pads simply behaves like a better headphone.
The catch is compatibility, and it's a hard line. These fit the WH-1000XM3 only — SOULWIT explicitly says they do not fit the WH-1000XM2 or the WH-1000XM4. So before anything else, check your model. Buy these if you own a WH-1000XM3 and want to restore comfort, isolation, and appearance for the cost of a part instead of a whole new headphone. Skip them if you own a different Sony model, or if you don't currently own an XM3 at all — there's nothing here for you. Note too that SOULWIT lists no warranty on this item, though the brand does invite you to contact them for replacements or refunds if something goes wrong.
JMTCtech Over: Who It's For
The JMTCtech Over is a different animal entirely: a complete over-ear headphone you take out of the box and use. Its headline feature is the three-mode active noise cancellation — ANC, Normal, and Transparency — with a rated reduction of up to -45dB. That's aimed squarely at the noises people actually complain about: car engines on a commute, keyboard tapping in an open office, the general hum of a plane or train. Transparency mode lets you hear what's around you without pulling the headphones off, and the spec sheet also mentions white noise as a relaxation option. In my opinion, having three switchable modes at this level of the market is genuinely useful rather than decorative, because the right mode changes with the situation.
Sound is handled by a custom 40mm dynamic driver, and the numbers on the sheet are a 20Hz–20,000Hz frequency range, 100 ohm impedance, 118dB sensitivity, and 60ms latency. The impedance figure is on the high side, which is worth noting if you plan to plug into weaker sources — but JMTCtech also gives you a 3.5mm AUX cable option, and the brand says wired listening delivers even richer detail. For calls, there's an ENC microphone with an algorithm that lifts the user's voice so it stays clear in noisy places, plus a simple button layout: single-tap to answer or end, triple-tap for the voice assistant, long-press two seconds to reject a call.
Then there's battery life, which is the standout number: a 1000mAh cell rated for up to 160 hours in normal mode at roughly 60% volume, with a 2.5-hour charge time. For commuters, that means charging occasionally rather than constantly. Physically, the P06 is built from ABS with a white finish, uses skin-friendly protein leather and slow-rebound memory foam on the cups, and has a retractable headband plus a foldable, rotating design for storage. It weighs 8.48 ounces, comes with a cable and user manual, and carries a 3-month warranty.
Side-by-Side: Which Should You Choose?
• Best for repairing a headphone you already own → SOULWIT Professional Earpads Cushions. It only exists to refresh the WH-1000XM3.
• Best for a complete, out-of-the-box headphone → JMTCtech Over. No existing gear required.
• Best for active noise cancellation → JMTCtech Over. Three modes and a rated -45dB reduction versus passive isolation from thicker pads.
• Best for battery life → JMTCtech Over. Up to 160 hours in normal mode from a 1000mAh battery.
• Best for comfort and seal on an existing XM3 → SOULWIT Professional Earpads Cushions. Added thickness plus high-density memory foam and softer protein leather.
• Best for calls and meetings → JMTCtech Over. Dedicated ENC microphone and one-tap call controls.
• Best for portability and storage → JMTCtech Over. Foldable, rotating, retractable headband design.
• Best for a quick, tool-light fix → SOULWIT Professional Earpads Cushions. Earpads, a guide, and a plastic stick, with a process SOULWIT describes as about 5 minutes.
If I had to pick one, I'd pick JMTCtech Over — but only for the person who actually needs a headphone. It's the more complete product: three ANC modes, a 40mm driver, a proper ENC mic, and up to 160 hours of playtime in normal mode, in a foldable body you can toss in a bag. That covers commuting, travel, calls, and desk work in one purchase.
That said, if you already own a Sony WH-1000XM3 and its pads are shot, the SOULWIT pads are the smarter move — you keep the headphone you like and just fix the part that wore out. My recommendation is JMTCtech Over for a new headphone, SOULWIT for a repair. Buy according to which situation is actually yours.
No. SOULWIT states these fit the WH-1000XM3 only, and explicitly says they don't fit the WH-1000XM2 or WH-1000XM4. Check your model before ordering.
Both. The sheet lists a 3.5mm jack and wired connectivity, and it includes an AUX cable in the box alongside the user manual. JMTCtech says wired listening adds detail.
JMTCtech rates it at up to 160 hours in normal mode at around 60% volume, from a 1000mAh battery. A full charge takes about 2.5 hours.
If you own a WH-1000XM3, the SOULWIT pads add thickness and use memory foam with softer protein leather for a better seal. If you need a whole headphone, the JMTCtech Over uses slow-rebound memory foam and skin-friendly protein leather with a retractable headband.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.