How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want the most bass-forward wired headphone of the two, choose Sony MDR-XB600; if you need a lightweight over-ear fit with plush full-ear padding for long, casual listening, choose Generic CLASSIDEEK Lightweight Over. That is the whole decision in one line. Everything below is me walking through why the specs push me to that split, and which side of it you probably land on.
• Sony MDR-XB600 — biggest strength: A genuinely bass-first design. A 40mm dynamic driver paired with Sony's "direct vibe" structure is built around low-end punch, and the listed 4–24Hz frequency range tells you the tuning is aimed squarely at sub-bass and thump.
• Sony MDR-XB600 — biggest trade-off: It's listed as an on-ear (in-ear placement) design with a 1.2m flat serrated cord and no wireless of its own — this is a cable-only, bass-tilted listening tool, not an all-day ambient companion.
• Generic CLASSIDEEK Lightweight Over — biggest strength: Comfort-first over-ear construction. Lightweight build, plush padded earpads that surround the whole ear, passive noise cancellation, and a long tangle-free cord for freedom of movement.
• Generic CLASSIDEEK Lightweight Over — biggest trade-off: "Extra bass" here is a tuning claim, not a spec. There's no driver size or frequency range listed, and at 48 ohm impedance it's a little harder to drive than a typical low-impedance buddy.
• Who each pick is for: Bass chasers and wired-only listeners → Sony MDR-XB600. Long-session, over-ear comfort seekers on a budget → Generic CLASSIDEEK Lightweight Over.
The MDR-XB600 is the one in this pair with an actual bass engineering story. The spec sheet names a 40mm dynamic diaphragm, a "direct vibe structure" for tighter bass response, and a frequency range of 4–24Hz. Read that range plainly: Sony is telling you the low end is the point. If your library lives in hip-hop, EDM, trap, drum-and-bass, or anything where the kick and the sub are the lead instrument, this is the headphone built for that job.
Comfort and portability get attention too. The pressure-relieving foam ear pads are there for longer sessions, and the dual-folding design collapses down so it can travel in a bag instead of living permanently on a desk. The cord is a Y-type flat serrated cable at 1.2m — the serrated flat profile is a real-world anti-tangle design choice, and 1.2m is a sensible desk-and-pocket length rather than a couch-to-TV length.
Generic CLASSIDEEK Lightweight Over: Who It's For
The CLASSIDEEK Lightweight Over is the comfort play. Every headline feature points the same direction: lightweight construction for extended wear, plush padded earpads that softly surround the entire ear, and passive noise cancellation to cut ambient distractions. That combination — full over-ear coverage plus light weight plus soft padding — is exactly what you want if headphones live on your head for hours: work-from-home days, long study blocks, gaming marathons, or a commute where you'd rather muffle the world than feel a clamp on your ears.
The practical details are friendly too. A long, tangle-free cord gives you room to move at your desk or across the room, and the standard 3.5mm jack means it plugs into basically anything with a headphone port — laptops, desktops, phones with an adapter, handheld consoles, older audio gear. The sheet also lists a 1-year warranty and a black/gray colorway.
The honest caveats: "extra bass technology" is a marketing phrase, not a measurable spec — there's no driver size or frequency range given, so I can't tell you how deep it actually goes, only that clear sound with enhanced bass is the claim. Impedance is 48 ohm, which is on the higher side for a casual wired headphone and means weaker phone outputs may not drive it to the same loudness as a low-impedance pair. It's also not water resistant, so keep it away from rain and sweat-heavy workouts. Buy it for all-day over-ear comfort and universal wired plug-and-play. Skip it if deep, spec-backed sub-bass is your single non-negotiable.
Side-by-Side: Which Should You Choose?
• Best for deep bass → Sony MDR-XB600. A 40mm dynamic driver, direct vibe structure, and a 4–24Hz range make it the only one of the two with bass you can actually trace to a spec.
• Best for full over-ear fit → Generic CLASSIDEEK Lightweight Over. It's listed as over-ear; the Sony is an on-ear with circular earpieces.
• Best for travel and storage → Sony MDR-XB600. The dual-folding design is the only folding feature in this pair.
• Best for tangle resistance → Sony MDR-XB600. The flat serrated 1.2m cord is purpose-built against tangles.
• Best for reach and room to move → Generic CLASSIDEEK Lightweight Over. Its long tangle-free cord is explicitly pitched at mobility.
• Best for plugging into anything → Generic CLASSIDEEK Lightweight Over. Standard 3.5mm jack and broad-device compatibility are called out directly.
• Best for bass-heavy music, wired only → Sony MDR-XB600. If your playlist is built on low end, this is the match.
In my opinion, the Sony MDR-XB600 is the one to buy if bass is what brought you here — the 40mm driver, direct vibe structure, and 4–24Hz range give you a concrete reason to expect real low-end weight, plus a folding frame and a tangle-resistant flat cord. I'd recommend the CLASSIDEEK Lightweight Over instead if your priority is wearing headphones for hours: its over-ear plush padding, light build, and passive noise isolation are aimed exactly at that. One is a bass instrument, the other is an all-day comfort tool. Pick the job, then pick the headphone.
how to pair sony extra bass headphones
Pairing only applies to wireless models. The MDR-XB600 in this comparison is a wired headphone with a 3.5mm jack and no Bluetooth pairing step — you just plug it in. If you own a wireless Sony Extra Bass model, pairing is done through your phone's Bluetooth settings menu.
how to connect sony extra bass headphones
On the MDR-XB600, connection is physical: plug the 3.5mm jack into your device's headphone port. The sheet lists a 1.2m Y-type flat cable and wired connectivity, so there's no app, dongle, or setup sequence involved for this model.
how to connect jvc deep bass wireless headphones
That's a different brand and, if wireless, a different process. For any wireless deep-bass headphone, the general routine is to power it on, hold the pairing button until the indicator flashes, then select it from your device's Bluetooth list. Note that neither headphone in this comparison is a JVC model.
what is deep bass in headphones
Deep bass describes how far down a headphone reaches into the low-frequency range — sub-bass and bass you feel more than hear. The MDR-XB600 states a 4–24Hz frequency range, which is how a manufacturer signals bass-first tuning; the CLASSIDEEK lists "extra bass technology" without a published range.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Bordsek Headphones USB C vs Sundix USB C Headphones, Zopsc BT 5.4 vs Ollaze Headphones, RAOPINGX MERAIJIN Trucker vs otinsile M100: Wireless on Ear, JLab JBuds Air Icon vs JVC Gumy Mini HAA6TB