How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want one compact passive box to switch a single 3.5mm source between two headphones or speakers and you want cables in the box, choose Sonshine Electronics Two channel Audio; if you need the smallest possible aluminum switcher with a clearly labeled left/right toggle for juggling two sources into one headphone, choose Cubilux 3.5mm.
• Sonshine Electronics Two channel Audio — biggest strength: true A/B switching with a bonus mute position in the middle, plus TRS and TRRS support so headsets with a mic work too.
• Sonshine Electronics Two channel Audio — biggest trade-off: it's a plastic ABS box, audio cables aren't included, and it's the bulkier of the two at roughly 50 x 35 x 24 mm.
• Cubilux 3.5mm — biggest strength: full aluminum shell, anti-slip base, pocket-sized at 1.65 x 1.14 x 0.51 inches, and it ships with two 3-foot shielded TRS cables.
• Cubilux 3.5mm — biggest trade-off: it's positioned mainly for headphone switching; with powered speakers the deselected input floats and can hum, and TRRS mic use needs TRRS-to-TRRS cables you supply yourself.
• Who each is for: Sonshine suits desk and streaming setups that want one switch handling headphones, headsets and speakers; Cubilux suits minimalists and travelers who want the smallest box and cables included.
This is a passive 3.5mm switch box built around a strong metal switch inside an ABS housing, with brass contacts on the jacks that resist corrosion over time. It runs two channels in an A/B layout, and because it also isolates the ground channel, Sonshine markets it as a good fit for people chasing down ground-loop noise in their setup. No batteries, no power, no software — you flip the switch and the signal moves.
The part that stands out to me is the middle position. Between A and B there's a mute stop, so you can kill the signal entirely without unplugging anything. That's genuinely useful on a desk where you don't want audio leaking into a mic or a stream while you rearrange cables. It also accepts any 3.5mm plug — two, three or four contacts — so a headset with an inline mic is fair game alongside plain stereo headphones.
Buy it if your priority is switching one source between two destinations (or the reverse) and you like having a hard mute in the chain. Skip it if you want something you can drop in a jacket pocket or if you expect cables in the box — they aren't included, so you'll need to buy the right lengths separately. It's also the larger unit here, which matters on a cramped desk.
Cubilux 3.5mm: Who It's For
It's bidirectional, so it does 2-in-1-out or 1-in-2-out. In plain terms: share one pair of headphones between two devices, or send one source to two headphones. Cubilux also includes two 3-foot shielded TRS audio cables, which means you can use it the moment it arrives rather than hunting for cables first.
Two honest caveats from the manufacturer's own notes. First, this is primarily a headphone switcher. If you leave powered speakers connected and switch away from them, the deselected speaker input sits in a floating, unfiltered state — and sensitive powered speakers can pick up interference and hum. That's a characteristic of passive switching, not a defect. Second, while it does pass TRRS microphone signals, you need TRRS-to-TRRS cables (not included) for that, and mixing TRS with TRRS can make your computer prioritize the TRS signal. If you're strictly switching headphones, none of that gets in your way.
• Best for switching headphones between two devices → Cubilux 3.5mm, since that's exactly the use case its toggle and included cables are built around.
• Best for switching one source to headphones or speakers → Sonshine Electronics Two channel Audio, which is explicitly framed as a speaker and headphone switcher.
• Best built-in mute → Sonshine Electronics Two channel Audio, thanks to its middle mute position.
• Best for ground-loop noise → Sonshine Electronics Two channel Audio, which isolates the ground channel as part of the switch.
• Best for pockets, travel and tiny desks → Cubilux 3.5mm, at roughly a third the footprint of the Sonshine box.
• Best out-of-the-box experience → Cubilux 3.5mm, because the two shielded TRS cables come with it; Sonshine ships the box alone.
• Best for mic-equipped headsets → Sonshine Electronics Two channel Audio, which handles TRS and TRRS plugs directly; Cubilux supports TRRS too but needs TRRS-to-TRRS cables you buy separately.
• Best for powered speakers → Sonshine Electronics Two channel Audio, since Cubilux warns about floating-input hum when speakers stay connected.
If I were buying for myself and my main job was flipping between a PC and a console with one pair of headphones, I'd take the Cubilux 3.5mm. The aluminum body, the labeled left/right toggle, the tiny footprint and the included shielded cables make it the cleaner, more finished little tool for that exact task. I'd pick the Sonshine Electronics Two channel Audio instead if my desk has both headphones and speakers in the chain, if I want a true mute position, or if ground-loop buzz has been nagging me — its ground isolation and TRS/TRRS flexibility cover more ground there. Both are passive, both need no power, and both do the basic job. It comes down to whether you're switching headphones or switching a whole desk. Check the current price on Amazon before you commit.
how to switch headphones left right
On a passive switcher this refers to choosing which port is active. With the Cubilux 3.5mm, the mechanical toggle is directional: flip it left to activate the left port and right for the right port, so the switch position tells you which side is live. The Sonshine Electronics Two channel Audio uses an A/B switch with a mute stop in the middle rather than a left/right labeling scheme.
how to switch headphones between devices
Connect both devices to the two ports and flip the switch to route audio to your headphones from whichever one you pick. Both units here are bidirectional, so they handle two sources into one output or one source into two outputs. Cubilux includes two 3-foot shielded TRS cables to get you started; Sonshine requires you to supply your own 3.5mm cables.
how to switch headphones to headset windows 11
Use the switcher purely as a physical pass-through between your PC and your headset — Windows 11 still sees whichever device is connected at the time, and you change the active route with the switch, not the OS. If your headset has a mic, remember TRRS matters: the Sonshine box accepts TRS and TRRS plugs directly, while Cubilux passes TRRS signals but needs TRRS-to-TRRS cables that aren't included.
how to switch headphones to speakers on computer
Plug your computer into one port and your speakers into the other, then toggle between them. The Sonshine Electronics Two channel Audio is the better match here, since it's explicitly designed as a speaker and headphone switcher and isolates the ground channel. Cubilux is aimed at headphone switching, and its own guidance notes that a deselected powered speaker can sit in a floating state and pick up interference that shows up as hum.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Mackie MobileMix 8-Channel vs Audiosavings Se Electronics NEOM, Cubilux USB C vs FiiO Snowsky Wind 3.5mm, eppfun Audio Receiver vs Amazon Renewed Edifier W820NB