STM32 and FTDI232 connection

Process to connect the STM32 and the FTDI232

Process

Disconnect all power supply from usb or another power source

2. Set the FTDI232 power Jumper in 3.3 V

3. Connect the FTDI232 with STM32 after that connect the FTDI module on PC using USB cable

4. Set the STM32 jumper Read to Write Mode

5. Push the reset button on STM32

6. Click on download Arduino Ide to download Arduino Ide and paste the link of the STM32 board inside the preference on the Arduino Ide

https://dan.drown.org/stm32duino/package_STM32duino_index.json

7. Install STM32 Board manager

8. Select correct board model and Com Port

9. Set the all correct option on Tools inside arduino ide

10. Upload the Blink Code

void setup() {

pinMode(LED_BUILTIN, OUTPUT);

}

void loop() {

digitalWrite(LED_BUILTIN, HIGH);

delay(1000);

digitalWrite(LED_BUILTIN, LOW);

delay(1000);

}

*** In case of upload failed problem. Push the reset button on STM32 and upload again

Page updated

Google Sites

Report abuse