How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 6 min read · Independent comparison
• Skullcandy Mod — biggest strength: true multipoint pairing in a compact in-ear design with app-based EQ, Adjustable Stay-Aware Mode and Custom Button Settings. Biggest trade-off: it's an in-ear bud, so it relies on a noise-isolating tip seal rather than active over-ear coverage, and the drivers are a modest 6 mm.
• Generic 6.0 — biggest strength: an over-ear fit with memory foam, a hard 85 dB volume limit, seven RGB breathing lights and 25 hours of playtime. Biggest trade-off: button controls and a plain feature set, plus a shorter 180-day warranty.
• Who Skullcandy Mod is for: commuters, gym-goers and anyone who juggles a laptop and a phone all day.
• Who Generic 6.0 is for: kids, volume-sensitive listeners, and anyone who wants a lightweight over-ear pair for long, low-volume sessions.
Skullcandy's Mod is built around three ideas: stay connected, sound how you like, and don't fall out. The headline number is battery — up to 34 hours total, split as 7 hours in the earbuds and another 27 in the case. Rapid Charge tops that up fast: 10 minutes of charging gets you about 2 hours of listening, which is the difference between a dead commute and a full one.
The multipoint pairing is the feature that actually changes your day. Connect to two devices at once and the Mod transitions between them. In practice that means your laptop is playing a call while your phone buzzes with a podcast — and you don't have to unpair anything. If you regularly switch between a work machine and a personal phone, this is the spec that matters most.
The rest of the sheet rounds out a fairly serious little earbud. IP55 sweat and water resistance covers workouts and bad weather. The Skullcandy app gives you preset and custom EQ profiles, Adjustable Stay-Aware Mode so you can hear traffic, and Custom Button Settings on the touch controls. There's built-in Tile finding technology, so you can locate the buds near or far once you register in the Tile app. Bluetooth 5.2 with a 10-meter range, 6 mm dynamic drivers covering 20Hz–20KHz, and a 1-year USA limited warranty.
Who should buy it: anyone who wants one pair of buds to serve work calls, music and the gym, and who values being able to tune the sound rather than accept it. Who should skip it: if you dislike sticking things in your ears, or you want over-ear coverage and a hard volume ceiling — the Mod is neither of those things. It's also worth checking the current price on Amazon, since that's the one variable that changes the math most.
The Generic 6.0 (model BT08C) takes the opposite approach. It's an over-ear headphone in white ABS plastic, and its defining feature isn't sound tuning — it's a volume limit. The 85 dB safe mode caps output at a level generally considered safer for extended listening, which is exactly why the sheet lists the age range as Kid.
Around that core, you get 25 hours of playtime, memory foam cushions, seven RGB breathing lights, and multipoint pairing so it can hold two connections at once. The operating range is listed at 15 meters — a bit longer than the Mod's 10 — and controls are physical buttons rather than touch. Bluetooth is the connectivity method, and it ships with a user manual.
Who should buy it: parents buying for a child, or an adult who listens at low volume for hours and wants over-ear comfort with memory foam rather than an in-ear seal. The RGB lighting is a genuinely fun touch for younger users, and button controls are easier for small hands than touch sensors.
Who should skip it: if you want app EQ, stay-aware audio, sweat resistance or find-my-earbuds tracking, none of that is here. The warranty is 180 days rather than a year, and there's no carrying case or extra tips in the box. Also note it's a fixed 85 dB ceiling — if you like to crank music, that limit will feel like a wall, not a feature.
• Best for battery life → Skullcandy Mod. Up to 34 hours total with a rapid-charge top-up beats the Generic 6.0's 25 hours.
• Best for safe, capped listening → Generic 6.0. The 85 dB volume limit is the whole point of this pair.
• Best for kids → Generic 6.0. Kid age range, volume limiting, over-ear memory foam and simple buttons.
• Best for workouts → Skullcandy Mod. IP55 sweat and water resistance has no equivalent on the Generic sheet.
• Best for sound customization → Skullcandy Mod. Preset and custom EQ plus Adjustable Stay-Aware Mode in the Skullcandy app.
• Best for losing your earbuds less often → Skullcandy Mod. Built-in Tile finding technology.
• Best for long-session comfort → Generic 6.0. Over-ear memory foam instead of an in-ear tip seal.
• Best for physical controls → Generic 6.0. Button control versus the Mod's touch surface.
In my opinion, the Skullcandy Mod is the better all-round buy for most adults. Multipoint pairing is the reason you're reading this, and the Mod pairs it with app EQ, IP55 resistance, Tile tracking and up to 34 hours of total battery — a genuinely useful combination for one pair of buds that has to do everything. I'd pick the Generic 6.0 only for a specific job: a child's first headphone, or a listener who wants a guaranteed 85 dB ceiling and over-ear comfort. Buy the Mod for versatility, the Generic 6.0 for a volume limit.
How to pair multiple headphones
Multipoint pairing is what lets one headphone hold two devices at once, so you can move between them without re-pairing. Both the Skullcandy Mod and the Generic 6.0 list multipoint support. The exact steps live in each product's manual — the Mod ships with one, and so does the Generic 6.0.
How to pair multiple headphones iphone
On iPhone, open Settings, then Bluetooth, and connect the headphone as you normally would. To use two devices at once, the headphone itself has to support multipoint, which both of these do. Keep in mind this connects one headphone to two devices — it does not play audio through two separate headsets simultaneously.
How to pair multiple headphones on ipad
The iPad process mirrors the iPhone: Settings → Bluetooth → select the headphone. If you want your iPad and your phone connected to the same pair at once, that's the multipoint feature doing the work, and both the Mod and the Generic 6.0 advertise it. Check the manual for how each one toggles between the two connections.
How to pair multiple bluetooth headphones
You can't stream one source to two Bluetooth headphones at the same time without extra hardware — Bluetooth pairing is one-to-one from the source side. What multipoint does is let a single headphone remember and switch between two sources, which is the feature both of these products list. If your goal is two people hearing the same audio, that needs a separate splitter or transmitter.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Baseus Bass BP1 vs JVC Headphones: Multipoint Pairing, Generic Headset vs PrancyBt Headset: Headphones for Work, Skullcandy Hesh Evo vs syndesmos 2.4GHz: Wireless Headphones