Hardware setup of your HP printer

• Before you start with the 123.hp.com/setup network configuration and the download and installation of the printer driver, you must first set up your hardware

• Complete the HP printer. Start by unpacking your printer. You will need to remove all tape and packing materials from your printer.

• Next, you need to place your printer on a level surface and within range of the wireless network.

• Then, unplug the power cord that came with the printer, and plug one end into the printer and the other into the electrical outlet.

• Then you need to turn on your printer by pressing the power button. Once your printer is on, you can set your preferences.

• For example, date, time, location, etc. Also, load the papers in the paper tray. Install the ink cartridge at the same time. .

Are you plugging your HP printer into the network connection?

Wireless network configuration:

• For the network configuration you must first switch on your printer. Its power light must shine.

• Then click the Wireless icon located on the printer control panel.

• After that you need the option; Settings ”; tap for the tooth shape

• Also select the Wireless Settings> options; Wireless Network Setup Wizard.

• Your printer will now start searching for the wireless networks around you.

• Then you need to choose your preferred network from the list that appears on your screen.

• Then enter the password for the successful connection to the wireless network.

• As soon as the connection has been successfully established, a completion message will appear on your screen.

Wired configuration:

You can also establish the connection between the printer and the router using the Ethernet cable. To do this, you need to connect one end of the cable to the router and the other end to your printer. This will establish a connection

For More:- https://cutt.ly/XdMherK