You already have used a centrifuge machine at your work place. These machines spin at top speeds. They create 2G to 4G effects when spinning. The machines may have many rotating parts. The parts can wear and tear easily due to friction.

• It is important to check the performance of the machine after every use

• You should look around for a Centrifuge Repair team for maintenance and repairs

• The task of maintenance includes servicing and cleaning

Basic inspection

The inspection of the machine has to be done regularly. Always schedule the inspection of the machine at least once every few days. The movable parts of the machine have to be inspected before use. After the basic inspection, it is important to clean the machine.

If you are using the centrifuge machine every day then the cleaning task can be performed after each use. This is the best way to ensure that the machine is always in working condition. When cleaning the machine, you have to ensure that the debris is cleared.

Balance checking

The centrifuge machine will spin at top speed. The machine should never lose its centre of gravity when spinning. If the CG is lost then this could lead to a major accident. It is a wise decision to check the balance of the machine when in use.

You can test Decanter Centrifuge for balance as well. This task is usually performed by checking the condition of the bearing and the shaft. If the machine does not have balance, then you have to change the bearing and the shaft.

Lubrication

Any machine part that spins should be lubricated. It is important to ensure that the machine is well-lubricated. If the machine has bad lubrication then it may generate high friction when spinning. The machine will also generate more heat.

It is important to follow the manufacturer's instructions when using lubrication on the machine. Consistent lubrication will also increase the life span of the machine. It is important to pay attention to the manufacturer's recommendations.

Motor inspection

The centrifuge machine is powered by a strong motor. This is used to generate spin at high speeds. You may have to consider full Gearbox Repair if you want to keep the motor in top condition. The motor also has to be checked for vibrations and noise.

There are other electrical components of the centrifuge machine. These components have to be checked at fixed intervals. The machine should always be inspected by a professional team.

For more information please visit: - Gearbox Repair