Best ScaleBlaster Review

ScaleBlaster has been the global leader in solving hard water problems and limescale formation, with its unique no chemical, no maintenance technology since its inception in 1995. Hard water and limescale formations are significant concerns in commercial and industrial applications. Until now, the only reliable solutions were toxic chemicals scale, inhibitors, or expensive water softeners.

WATCH THIS VIDEO FOR MORE INFO ABOUT SCALE BLASTER

The system is installed on the incoming water supply line entering the building or on the water feed line going into the equipment, subject to hard water issues or limescale formation.

In other cases, ScaleBlaster can be installed on the recirculating water system. A signal cable is wrapped around this pipe and connected to a computerized power box that produces sonic wave frequencies that hit the resonant frequencies of the calcium molecules. This causes them to lose their adhesive properties, thus no longer allowing scale formation in pipes or on heat transfer surfaces.

ScaleBlaster review will remove any existing scale and keep it away forever without chemicals, salt, or maintenance. ScaleBlaster prevents a new scale from forming but allows the water to dissolve the current scale. There are hundreds of applications ScaleBlaster will work on.

Our Review

ScaleBlaster offers a wide variety of benefits in commercial applications. With the significant buildup of limescale deposits in the entire building's piping system, older buildings can be significantly descaled without the need for chemicals or repiping, which could cost hundreds of thousands of dollars. Water heaters and boilers will work more efficiently, resulting in substantial energy savings scale is controlled on heating coils. In the tank, just one-quarter-inch of scale deposits can increase fuel costs by 40 percent due to scale buildup limescale buildup in dishwasher lines, and heating coils will be significantly reduced.

ScaleBlaster will control scale, deposits, and laundry facilities. Reducing detergent use sheets and towels will feel softer and last longer there will be less scale buildup in toilets showers, nozzles, and faucets, thus reducing cleaning time while saving on cleaning chemicals. There are numerous benefits to using scale blaster in HVAC, and industrial applications, cooling towers, chillers, heat exchangers, evaporative, condensers boilers, pumps, pipes, and valves are all subject to massive scaling.

How Does ScaleBlaster Work

ScaleBlaster will remove most of the existing scale and keep it away forever. Scale and biofilm are excellent insulators and are significantly reduced. Scale buildup in pipes decreases the flow rate, increasing the workload of your equipment, and reducing their lifespan. ScaleBlaster may reduce energy costs by up to 30 percent due to heat transfer working more efficiently, cooling and heating systems are significant, investments that need to be protected.

Water Softener Buying Guide

ScaleBlaster will reduce corrosion scale deposits, and toxic chemical studies by manufacturers indicate a cooling system should last 20 years or more yet are only lasting an average of eight years due to improper water management. Limescale removal with limited chemical treatment allows you to reduce flow doubts because concentrations of the total dissolved solids in the water can be allowed to rise without concern for scale buildup. The cycles of concentration can be increased, saving the operator considerable amounts of water.

These savings of water consumption can be quite significant and is a substantial benefit of using Scale Blaster. The volume of discharged water is reduced proportionately, along with the fees charged by many municipal sewer agencies. This will minimize biocorrosion by preventing the formation of bio growth on vessel surfaces, where bacteria can attack the metal as the calcium carbonate precipitates in suspension. It raises the waters TDS as the TDS increases. The pH increases, thereby making the water less corrosive by removing scale deposits.

Scale Blaster System

  • ScaleBlaster will help remove a significant breeding ground for bacteria and algae.

  • ScaleBlaster works, excellent on wastewater treatment, plants, pumps, and lines used to feed chlorine into the treatment stream, become full of limescale deposits and must be cleaned.

  • ScaleBlaster will keep scale particles suspended in the fluid and out of the pump lines. It'll keep scale off the filters, sensors, and mixing tanks and protect the discharge line.

  • ScaleBlaster will also address scale issues on the lime injection systems, and the piping feeding the clarifiers blaster will also work great on boilers, both steam and utility boilers. The unit should be installed after the feed water pump and on the makeup freshwater pipe, if possible, by removing limescale deposits with minimal chemical.

  • ScaleBlaster will increase efficiency by using less energy.

This will result in a significant reduction in fuel costs leading to substantial savings. There will also be saved by reducing scale, control, chemicals, and chemical additives. Scale blaster will remove existing scale and prevent any severe scale formation on heat transfer surfaces, thus eliminating the need for a water softener scale. Blaster has been solving hard water issues with worldwide success in over 70 countries. Our equipment is on hundreds of power plants all over the globe. Several large companies also use ScaleBlaster.

Buy Water Conditioning System

ScaleBlaster is designed engineered and manufactured in the USA. The best part about using scale blaster is that you're protecting the environment scale blaster will save you on energy and water usage. If you were using water, softener, you'd no longer be dumping tons of salt into our water supply, polluting our environment.