How to Download and Use SainSmart DDS140 Software for PC-Based Oscilloscope
If you are looking for a medium-performance oscilloscope that can also function as a signal generator and a logic analyzer, you might want to consider the SainSmart DDS140 PC-Based Oscilloscope. This device can be extended by inserting different sub-modules, and it has a high performance price ratio. In this article, we will show you how to download and use the SainSmart DDS140 software for your PC-based oscilloscope.
sainsmartdds140softwaredownload
DOWNLOAD: https://imgfil.com/2vTjly
What is SainSmart DDS140 PC-Based Oscilloscope?
SainSmart DDS140 PC-Based Oscilloscope is a device that can measure and display electrical signals on your computer screen. It can capture waveforms of up to 40MHz bandwidth and 200MSa/s sampling rate. It can also generate signals of various shapes, frequencies and amplitudes by using the signal generator module. Moreover, it can analyze digital signals of up to 16 channels by using the logic analyzer module.
The SainSmart DDS140 PC-Based Oscilloscope consists of a main body and three optional sub-modules: the signal generator module, the logic analyzer module and the oscilloscope probe. The main body has two BNC ports for connecting the oscilloscope probe or the signal generator module, and a USB port for connecting to your computer. The main body also has a small metal tip that outputs a square wave signal of 1KHz and 3.3V peak-to-peak for testing purposes.
How to Download SainSmart DDS140 Software?
To use the SainSmart DDS140 PC-Based Oscilloscope, you need to install the driver and the software on your computer. The driver and the software are compatible with Windows XP/Vista/7/8/10 operating systems. You can download them from the official website of SainSmart or from the CD that comes with the package.
Here are the steps to download and install the driver and the software:
Plug in your SainSmart DDS140 device to your computer via USB cable. Windows will recognize it and prompt you to install the driver.
If you have the CD, insert it into your CD-ROM drive and run the setup.exe file under the folder "driver". Follow the instructions on the screen to install the driver.
If you don't have the CD, go to http://wiki.sainsmart.com/index.php/SainSmart_DDS140_PC-Based_Oscilloscope [^1^] and download the driver file under "Resoures". Unzip it and run the setup.exe file. Follow the instructions on the screen to install the driver.
After installing the driver, run the software application. You can find it under the folder "software" in the CD or on the website. The software name is "DDS-120-140.exe".
Click the Start button on the lower right corner of the software interface, and it will show you the zero voltage waveform of Channel 1. Turn on CH2, and it will show you the waveform of Channel 2.
How to Use SainSmart DDS140 Software?
The SainSmart DDS140 software has a user-friendly interface that allows you to control and adjust various parameters of your oscilloscope, signal generator and logic analyzer. You can also save, export and print your waveforms, as well as perform measurements and calculations on them.
Here are some basic functions of the SainSmart DDS140 software:
To change the time base (horizontal scale) of your oscilloscope, use the slider or buttons on
the lower left corner of the interface. You can also enter a specific value in
the text box.
To change
the voltage range (vertical scale) of your oscilloscope, use
the slider or buttons on
the right side of each channel. You can also enter a specific value in
the text box.
To change
the position (offset) of your oscilloscope waveform, use
the slider or buttons on
the right side of each channel. You can also enter a
e033bf56a8