AMM 3900A, CAD for Patternmaking, marks the beginning of the capstone experience for apparel production students. In this course, students learn how to develop patterns, prototypes, and samples using a program called TUKAdesign. For each project, students create pattern blocks & initial patterns using computer-aided design (CAD) for both standard-sized garments as well as customized garments. Students then adjust prototypes & patterns for correct fit. The application of pattern theory will be used to evaluate apparel fit, pattern revision, and pattern verification. Students also learn about apparel industry patternmaking (e.g., grading rules for basic pattern blocks & appropriate markings for patterns with different fabrics) and garment assembly (e.g., using industrial machines for sewing RTW prototypes).
There are 2 projects students complete in this course: (P1.) Standard-sized skirt with graded patterns based on industry standards, and (P2.) Customized skirt based on a classmate's body measurements.
Students conceptualize and develop a skirt with the following requirements: (1.) darts/dart equivalents, (2.) waistband, (3.) zipper closure, and (4.) at least 2 more design elements (e.g., yoke, pockets, ruffles, gathers, pleats, design cutting, etc.). Students will then use industry grading rules to adjust their skirt blocks to create 4 sizes (6, 10, 14, 18). Then they create their patterns based on these blocks and the grading rules. The primary objective for this project is to create a standard-sized prototype that will fit on a size 10 dress form.
The design concept for this skirt is a "de-constructed" Ao Dai, or traditional Vietnamese dress. I wanted to separate the Ao Dai into two parts, the bodice and the skirt, and recreate the skirt in a different way than it usually is.
This maxi skirt has a total of 7 panels, with 2 dart clusters in the front and 2 dart clusters in the back. The side panels have a lot of drape and flare, especially at the bottom. It has a waistband with an invisible zipper closure and 2 in-seam pockets, one at each side.
The design has dart clusters as opposed to regular darts because part of the elegance that radiates from an Ao Dai is the subtle intricacy of the garment; it looks so simple and classic, yet there is a lot of technique and craftsmanship that goes into one. Dart clusters was a way I could elevate the details of the skirt without it being conspicuous.
The design also has inseam pockets because it's always a plus for a garment to have some functionality. Additionally, the inseam pockets add to the inconspicuous details of the skirt as the pockets would not be seen until it was used.
The fabrics used in the final prototype were a heavy gray fabric that wrinkled easily and a lightweight, silky satin weave fabric. My intention was to have some contrasting aesthetics between the two fabrics. The final skirt prototype looked very steampunk.
The initial CAD patterns I created on TUKAdesign was a valiant attempt; however, there were definitely some revisions I needed to make.
1. The measurements for the waistband and waist were incorrect.
2. Increase the hem width for the side panels to add more flare.
3. Adjust the overall skirt length to make it shorter.
Front View
Left Side View
Back View
Right Side View
The initial muslin prototype I created also had some revisions I needed to make in order to perfect the final prototype.
1. The sewing of the dart clusters needed to be perfected; in this prototype, it is clear that I had grabbed too much fabric when sewing the darts and subsequently reduced the lower waist/upper hip measurements. The drag lines in the back view of the skirt are an obvious indicator that this area is too tight around the dress form.
2. The insides of the inseam pockets are showing; this is another indicator that I had grabbed too much fabric whilst sewing and made the skirt too tight around this area.
3. The construction of the invisible zipper was not cleanly finished as it was not tucked into the waistband.
The final CAD patterns for this skirt were much better than the initial ones. I made all of the revisions I needed to from the initial CAD patterns.
I changed the measurements for the waistband and waist to the correct ones (28" and 28 1/2", respectively). I also increased the hem width for the side panels to add more flare and I adjusted the overall skirt length to make it shorter (from 40" to 39")
Front View
Left Side View
Back View
Right Side View
Although I revised the patterns with the revisions needed to perfect the final prototype, the final prototype did not turn out perfect.
The waistband and waist fit the dress form very well. However, the side panels, even with the increase of the hem width, did not have as much flare as I envisioned. Additionally, the inseam pockets were showing even more than the first muslin prototype and the drag lines still prominently remain in the back view of the skirt.
For the flared side panels, I would revise my patterns again to increase the hem width to add more flare. As for the inseam pockets and the drag lines in the back, I think that this resulted from a combination of my sewing of the dart clusters and the side panel patterns. I would revise the flared side panels and increase the hip width to fix the issue of the inseam pockets showing and the drag lines on the back skirt. As for my sewing, I would have to keep on practicing sewing the minuscule darts in the dart clusters. I would also change the fabrics I used because they were so different in weights that it was difficult to sew and the final prototype was puckered at the seams.
From this project, I learned how to use and apply grading rules to a patterns so that there are multiples sizes of the same garment. Although I had briefly learned about grading in AMM 314, Apparel Technical Design, we didn't delve too deep into the rules. However, for this project, I really had to understand how grading works, where the breakdowns are, and how much to add to or subtract from each grading point so that the patterns will go up or down a size. I can easily apply this knowledge when I enter the industry because grading is extremely important for mass apparel production. In any job I get after graduation or wherever my career takes me, understanding grading rules and the breakdowns will be the key to my success.
Most importantly, I learned how to use TUKAdesign to create original patterns. This project was really about learning the CAD program to create patterns from a block. My skirt design was relatively simple because I wanted to focus more on exploring the program and using all the tools. Having a simple skirt design allowed me to carefully investigate each tool to figure out the best to create my patterns. I can apply this knowledge when I enter the industry because CAD pattern making is being more and more relevant in a technology-driven world and I will need to understand at least one CAD pattern making program to be successful in my career down the road.
Students conceptualize and develop a shirt dress with the following requirements: (1.) front & back dress bodice with correctly sized shoulder lengths, (2.) collar, (3.) sleeves, (4.) zipper or button closure, and (5.) at least 2 more design elements (e.g., yoke, pockets, ruffles, gathers, pleats, design cutting, etc.). Students then create standard dress blocks based on a standard industry size, adjust the blocks according to their "client's" (classmate's) body measurements, and create dress patterns based on this block. The primary objective for this project is to create a customized garment that will fit the student's classmate's body.
The design concept for this shirt dress is inspired by the Victorian Age (1800s), if a business merchant was very fashionable.
This shirt dress has a front & back bodice, a collar with collar stand, bell sleeves, an invisible zipper closure on the back, 2 bust darts on the bodice, 4 darts on the back skirt, pin tucks on the bodice, princess seams on the bodice, and pleated side panels on the skirt.
For this design, the skirt is relatively simple as I wanted to focus more on the bodice. I modeled the skirt after my P1 skirt design with a few adjustments. For the bodice, I wanted to include pin tucks to emulate the dart clusters from P1. Since the delicate dart clusters from P1 did not turn out as nice as I would have liked, I wanted to try creating pin tucks. Again, this design element adds a subtle intricacy to the overall garment.
A major design element in this shirt dress design are the bell sleeves; they have a sort of flowy elegance that went well with the openness of the pleated skirt. I also wanted to include some princess seams in the design as I have never created patterns with princess seams before and I wanted to, again, bring out some contrasting aesthetics through the selection of fabric.
The fabrics used in the final prototype were pinstripe shirting & crepe-back satin for the bodice and suiting for the skirt. All of these fabrics were comparable in weight and because they were all non-stretch woven fabrics, the shirt dress was very easy to sew, much easier than the skirt from P1.
The initial CAD patterns I created on TUKAdesign were pretty good, considering that I had never made such complex patterns before, with both princess seams and pin tucks. It wasn't too difficult adjusting the basic dress block, creating the princess seams, and adding the extra fullness for the pintucks. However, the sleeves were incredibly hard to adjust and scale proportionately to my partner's body measurements, so I ended up drafting a new sleeve.
Since the design of this skirt was very similar to the skirt I had made in P1, it wasn't too difficult to adjust the basic dress block and splitting it into multiple panels. The most difficult part was creating the pleats as I was not sure and could not imagine the process of folding the pleats with cut fabric.
Front View
Left Side View
Back View
Right Side View
The initial muslin prototype I created had some major revisions I needed to make in order to perfect the final prototype.
1. Overall, there was a lot of excess fabric above my partner's bust, at her waist (both front and back), and at the shoulders. To fix these problems, I needed to take in more fabric at the princess seams, raise the waistline by 2" all the way around, create 2 bust darts with an intake of 2" each to take in more fabric, shorten the shoulder length by 3/4" and shape out the armhole to accommodate for the shrunken shoulder.
2. The shoulder seams weren't matching my partner's shoulders; to fix this, I moved 1/2" from the front shoulder to the back.
3. In terms of aesthetics, I shortened the sleeve length from 22" to 16" and lowered the collar stand height from 1 1/2" to 3/4".
I revised the final CAD patterns with the necessary revisions from the fit evaluation. I added some interfacing pieces for the collar and collar stand (to make these pieces sturdier) and changed the bell sleeve cuffs from CUT-2 to CUT-4 to give it a clean finish when sewing.
I revised the final CAD patterns with the necessary revisions from the fit evaluation, in particular, raising the waist 2". I added an interfacing piece for the waistband to give it more structure as my fabric was too lightweight.
Front View
Left Side View
Back View
Right Side View
The final prototype fit drastically better than the first muslin prototype. There was no more excess fabric on the upper bust and around the waist; the bodice, almost perfectly, fit my partner very well. However, because I focused too much on the bodice, I didn't pay a lot of attention to the skirt. The seam where the pleated front side skirt panels met the center front skirt panel popped out more than I had intended. This, most likely, was a combination of my patterns being too curved at these edges and my sewing. Additionally, the side seams on the skirt did not match the side seams on the bodice; it was off by around 1 1/4", which is not ideal. This is definitely because of my patterns; if there was more time in the course, I would certainly revise my patterns again to make sure that both side seams met.
I definitely learned a lot more from this project than the first project, even though it was much more difficult. I learned how to properly adjust and customize a standard-sized block to a person's body measurements and how to create princess seams & pin tucks in patterns. With mass customization becoming more relevant, it is clear that learning the art of apparel and fit customization will be a significant experience down the line when I enter the apparel industry.
Most importantly, I truly understood the purpose of darts and dart equivalents. It is easy to say that the purpose of darts and dart equivalents are to control excess fabric in a garment, but it is difficult to understand their purpose when there is a given dart intake every time a block or pattern is created. Given that my partner has an hourglass figure, it gave me more to think about when I went to revise and re-adjust the patterns. I needed to understand that because her body is more curvy, I needed to take in extra fabric so that the final garment would nicely lay along the contour of her body. Darts and dart equivalents are very basic concepts in pattern making and in apparel fit, but it's difficult to understand unless you see it for yourself. I really liked this project because it was so challenging; I had to think for myself and really scrutinize my work (my prototypes & my patterns). This project made me a better critical thinker, pattern maker, and apparel production student.