In AMM 301/L (Apparel Product Analysis), I learned how to analyze and compare various features in ready-to-wear apparel and its construction to determine possible differences in quality and price. In this class, industrial equipment, like sewing machines, were used to not only further analyze ready-to-wear apparel, but also to understand their usage (why certain operations are used over others). This class also put an emphasis on specifications sheets and technical packages, which are very important in the industry.
All of the assignments and projects given during this course helped me to understand and achieve the course objectives. For example, one of the first assignments was the Stitch Classification, which aided in learning which machines create which stitches; it was like a scavenger hunt, I had to know what each stitch looked like and find the machine that would give me that stitch. Although running around to find the machine I needed was sometimes frustrating, this assignment is particularly useful since stitches are what hold the fashion industry together.
Another lab assignment is the Sewing Kit. This was the second time I had sewn a non-apparel piece, so I had to shift my thinking from fitted, three-dimensional garments to more two-dimensional items. This assignment really helped me to fully understand the stitches, seams, and their uses. For example, the overlock machines (stitch class 500) were used to finish off the edge of the kit without needing extra seam allowance; an operation like this is very simple and would probably be considered as low quality. Something else I learned from this assignment is that the order of operations is critical to production. This sewing kit has a button and buttonhole and typically, these operations would be done in the final stages of production. However, doing them at the end runs the risk of ruining the product (i.e. opening up the buttonholes too hastily cause a delay in production in an actual company). The last thing I learned from this assignment is matching trims with fabric. When I purchased my fabric, I forgot that I also needed to purchase trim, so I was in a little bit of a dilemma; since my fabric had a busy pattern, I didn’t want to add to it by getting a fancy trim. I also didn’t want too simple of a trim, so it was hard to find a good middle ground. The first trim I decided on was black with big eyelets, since it reminded me of dog collars and there were dogs on my fabric; however, it was difficult to sew because of the eyelets. I ended up with a simple black trim but on the last day, I made an executive decision to bind the edge of the kit with it. This moment proved to me that sometimes the final product won’t come out exactly as you envision it on the first day; you have to be flexible and work with what you have to come out with a great final product, no matter what your first vision of it was. In this moment, I got a very small glimpse of what any industry must be like; being able to adapt and adjust in order to succeed.
Currently, the class is working on a Shirt Disassembly project, where each group takes a long sleeve, button-down shirt and takes it apart in order to analyze its construction; as a result, this project takes all the concepts we’ve learned about, from thread to seams & stitches to garment assembly. Although this project is a little tedious due to the seam-ripping, it definitely allows me to put together all that I’ve learned, that each concept is crucial to the previous one and the next one. For example, having the right thread is vital to any sewn product, especially in a clothing item where constant stress/strain can cause abrasions. In addition to having the correct thread, the correct operations must be performed. So far, the shirt that my group is disassembling seems to be pretty high quality due to the types of stitches and seams, as well as the high use of interfacing. In terms of garment assembly, we don’t think that anything was done out of order; the parts (pockets, plackets) and the panels (hems, ease, pleats) were sewn, then they were sewn into pieces (collars, sleeves cuffs, etc.), which were put together to create the final product.
I learned a lot in this course but two things have resonated with me. The first is that clothes are made by humans, not conveyor belts; as a result, I’ve been thinking more about ethics in fashion and how that can affect the industry in a long-term perspective. It reminds me of a film titled “The True Cost” where apparel production is investigated to see if this is the route we want to go down. The second is that garment defects are apparent in nearly all clothing items, so the next time I go shopping, I will be sure to check thoroughly for defects and hopefully come out of the store with my wallet intact.