In AMM 214/A (Introduction to Pattern Making), the method to draft basic bodice and skirt blocks for a standard dress form size and basic pattern making for ready-to-wear garments was introduced in this course manually (not using CAD like TukaDesign). In addition to creating patterns in the class, sample garments were also produced with the various sewing equipment available in the lab. During this class, I ran into a couple problems concerning my patterns, as pattern making takes a high degree of patience and math skills.
The first assignments given during this course were the basic skirt block and the personal skirt block. Right from the start, I soon realized that pattern making was going to be more difficult than I had anticipated. Just from the math, I was overwhelmed. Pattern making requires geometric thinking, where the pattern maker has to think two-dimensionally on the flat paper and three-dimensionally on the form/model; the pattern maker has to think about how they want the pattern to fit once it is created into a shaped garment. I think this course showed me a more “rigid” side of fashion because everything has to be just so, precisely where it needs to be. This course introduced to me a new way of thinking that I didn’t think fashion could offer.
When I started to work on the first personal skirt block, it was easy because I knew where each measurement had to go in order to properly fit but the sewing was the most difficult part of it all, probably because I knew how my pattern was supposed to go together and when it didn’t, I got very frustrated. Especially when I had to sew the waistband onto the skirt, the waistband came up a little bit short and I was already rushing to finish the skirt. This assignment showed me that being careful is a very important thing to be; I have to be careful when measuring and cutting out my patterns because every little step leading up to the final garment is essential in its final fit.
I felt more confident about the second personal skirt block and sample but I also felt hesitant. Because of what I learned during the first skirt sample assignment, I was ready to apply this knowledge to a skirt with the possibility of it actually being worn, but I was also hesitant because I didn’t want what happened with the first skirt to happen to this one. Since this assignment was to design and create a skirt, I took into careful consideration my abilities and my limitations. Creating the patterns for the skirt was simple enough since I had already done a half-scale 6-gore skirt; I knew what pieces I needed and how to create those. The sewing portion was interesting, to say the least, because I had to think about not only how the pieces will fit together but also the order in which those pieces needed to be sewn together for the best fit. For example, instead of sewing the back skirt to the back facing and the front skirt to the front facing, I sewed those two separately and attached them together in a round construction. This was my favorite assignment because it was the first time I got to see my ideas come to fruition in the physical realm.
One of the last lessons we learned in the class was grading patterns. After listening to the lecture, I had mixed feelings about sizing in the fashion industry because on one hand, it’s good to think about your customers and to be inclusive but on the other hand, it’d be difficult to be inclusive since more sizes means more money. It definitely gave me a lot to think about and reminded me of a reason why I wanted to be in this major.
I learned a lot in this class about pattern making and how to create a sample garment. Pattern making is more than the pattern pieces themselves; it is about the math, the measurements, and the fit of the final garment. Also, it is important to think about the entire process of the garment, from the paper to the final sewn product, because pattern making doesn’t stop at the pattern pieces.