In AMM 180L, I learned how to sew basic garments using industrial equipment, like the single-needle machine, the overlock machine, and the cover-stitch machine. In this course, there were several objectives I had to meet, like being able to identify and use the industrial equipment (like the ones previously listed), being able to sew basic garments (like a t-shirt and shorts), being able to recognize various seams, being able to understand basic sewing terminology, and being able to appreciate the work a production sewer/sample maker does.
All of the assignments given during this class aided my understanding and mastery of the course objectives. From the very first class, I had to be able to identify and use each machine in order to complete the assigned garments. In addition to understanding how to use the machines, I also had to know how each machine works, so if anything went wrong, I would know how to fix it. For example, I have to know how to thread the single-needle machine and recognize if the machine isn’t threaded properly. In addition, I learned basic sewing terminology and basic seams. Some words I learned throughout this course are “edgestitch” (a 1/8” decorative stitch), “tack” (a stitch to hold a garment piece in place when sewing), and “coverstitch” (a stitch that hides the raw edge of a fold). By sewing various basic garments, I also gained an appreciation for production sewers and sample makers; I realize how much work it takes to create even a simple piece of clothing. Not only did I gain an appreciation for the people who make my clothes, but I also have more appreciation for my clothes and how they’re made. Now when I buy clothes or pick out an outfit from my wardrobe, I pay more attention to how they’re made: how the pieces were sewn together and how the concepts I learn in class apply to my life.
Throughout this course, we were assigned various things to sew, like pillowcases, shorts, t-shirt, and a woven button-up shirt. During each of these assignments, I gained insight as to how I should sew my garments so they would look good and like someone could actually wear them. I had valuable experience during each assignment. For example, for the pillowcase, even though I sewed them well, I guess I didn’t know how to read the sewing gauge on the machine (the lines next to the presser foot) because I was sewing with ½” seam allowance and not the given ¼” seam allowance. Even though I got points taken off for this, I still gained knowledge from this mistake and now I am careful to check each time I sew, how much the seam allowance is and I always use my metal sewing gauge (the little ruler). The shorts were a little difficult for me because it was my first time using the overlock machine and it was hard for me to visualize how the pieces I had cut out would fit together in the end. I asked the professor constantly about the next step, but I was still really proud of my work. The t-shirt turned out to be a lot easier than I thought; the hardest parts were sewing the ribbing to the fabric and matching up the stripes so the final garment would look good. By this point, I was already pretty familiar with how to use the overlock machine and how much I should press the treadle so the machine doesn’t go fast; the part I was most worried about was sewing in a circular motion and not getting all of the fabric overlocked. I actually did miss a few areas but they were small so I used the single-needle machine to fix them. As for matching up the stripes, I had some idea of how to match them so that the sleeves and the body of the garment would look continuous but I still had to ask the professor to check.
Even though I had trouble with each of the garments, I gained experience and insight from each of them and in this way, I am more knowledgeable about the various machines and tools we used in class and know more about the clothes I wear. I learned a lot from this class and during the summer, I am planning on altering some of my clothes so that they fit better. Hopefully, with some of the knowledge from this course and my grandparents’ help, I will have better-fitting clothes by fall quarter.