Gps Tracker Parameter Editor V1.39

How to Use Gps Tracker Parameter Editor V1.39 to Configure Your GPS Trackers

Gps Tracker Parameter Editor V1.39 is a software tool that allows you to configure various settings for your GPS trackers, such as GPRS, SMS, password, logging, power saving and more. It supports different models of GPS trackers, such as GT30, GT30X, GT60, VT300, VT310, and MVT400[^1^] [^2^]. In this article, we will show you how to use Gps Tracker Parameter Editor V1.39 to configure your GPS trackers in a few simple steps.

Step 1: Install the driver and connect the tracker

Before you can use Gps Tracker Parameter Editor V1.39, you need to install the driver for the USB-to-Serial Adaptor that comes with your GPS tracker. The driver is called PL-2303 Driver Installer for GT30, GT30X, GT60, VT300 and MVT400[^1^], or CP210x Driver Installer for VT310[^2^]. You can find the driver in the CD that comes with your GPS tracker or download it from the internet.

After installing the driver, connect the USB cable and USB-to-Serial Adaptor with your computer and then open Device Manager. You should see Prolific USB-to-Serial Comm Port or CP210x USB to UART Bridge Controller under Ports (COM & LPT). Note down the COM number that is assigned to the port. You will need it later.

Next, connect the GPS tracker to your computer by the USB cable and USB-to-Serial Adaptor. Depending on your model of GPS tracker, you may also need to connect the SOS button cable or short-circuit the white cable (Input1) and black cable (GND) to enter configuration mode[^1^] [^2^]. Turn on the tracker and make sure all LED lights are on or stable.

Step 2: Run Gps Tracker Parameter Editor V1.39 and read preset parameters

Run Gps Tracker Parameter Editor V1.39.exe (or versions above) from the CD or download it from the internet. You should see a configuration window like this:

Select the same COM as the Device Manager shows and click Start. Then click Read to read all preset parameters from your GPS tracker. You should see something like this:

Step 3: Modify parameters according to your needs

Now you can modify various parameters according to your needs. Here are some explanations of the main parameters:

GPRS: Check this box to enable GPRS tracking mode. You need to input your APN name, account and password (if any), as well as the IP and port of your server that receives the GPRS data from your GPS tracker.

TCP/UDP: Choose TCP or UDP communication protocol for GPRS tracking mode.

Tracker ID: Set a unique ID for your GPS tracker. For example: 888888.

Interval: Set an interval for GPRS or SMS tracking mode. The unit is second.

SMS Tracking No: Authorize a mobile phone number for receiving SMS location reports from your GPS tracker.

Password: Set or change user password for sending SMS commands to your GPS tracker.

Prefix (area code): Input your country code here if it is not automatically added when sending SMS. For example: +27 for South Africa.

Wiretapping: Set a phone number for voice surveillance or wiretapping (listen only) mode. 66dfd1ed39

smartsvn license keygen for mac<br>Rocket Singh Salesman Of The Year Movie Torrent Free Download<br>Flac Mp3 Converter Serial Code<br>