You will need roof anchor points when working at heights because it is fraught with danger. Falling from height can give you bad injuries and even kill you. If you are required to work at heights, you will need anchor points to prevent fall fatalities. Every employee is entitled to a safe working environment and as a business owner, you can be charged if your safety systems are not compliant with the available standards. Unfortunately, selecting anchor points is not straightforward. Not all anchor points are created equal and choosing anchor points isn’t a decision to be taken lightly.

What is an anchor point?

An anchor point is used in tandem with other height safety protection equipment such as lanyard or harness fall protection systems. Both temporary and permanent anchor points are available. When an anchor point is correctly installed, it will protect workers from fall hazards.

Things to consider when choosing anchor points

When selecting roof anchor points Sydney in NSW, it is necessary to consider the type of forces that the anchor points are required to withstand. You will also consider the type of anchor points that your lanyard safety connect to and the type of work that you want to perform. Another important thing to consider is the part of the room that you will attach your anchor point to.

Choosing the right anchor point

When choosing roof anchor points, there are a few things you should remember. You need to remember that a steel member is normally preferable, anchor bolts need to be inspected by a professional, wood should be certified by a qualified engineer, the bolts and the plate washers should be inspected by a qualified professional, anchor points should be inspected and evaluated for load-bearing capacity and the equipment such as turnbuckles, eyebolts, beam clamps and concrete embeds may be used with the anchor points.