There are different types of roof anchor points in Australia you can use when working on a roof. As technology improves, manufacturers of height safety equipment are coming up with alternative equipment to use in different situations when working at heights.

There are different types of roof anchor points in Australia you can use when working on a roof. As technology improves, manufacturers of height safety equipment are coming up with alternative equipment to use in different situations when working at heights. Nowadays, we don’t need an existing structure. We don’t even need to penetrate the roof to use anchor points. With the improvements in technology, we can choose from different types of mobile anchor points listed below.

Anchor straps

If we look back at the situation where there was only a piece of equipment on the roof that we weren’t able to tie off to, we realise that things were tough for workers. While this may still be true, but if there was supporting steel available or a piece of equipment suitable to be used as an anchor point, things could be better. You still might not be able to get a place to connect a snap hook but an anchor strap can provide you with the connection you need.

Anchor straps are designed for fall protection. You may not replace rigging slings. It is also important to remember that in such a situation, you will be using the strap around the steel. You need to ensure that you protect the strap from the edges if it doesn’t have built-in abrasion protection. Make sure you keep in mind the rating of your strap before using it as roof anchor points in Australia. Just like any other anchor point, the anchor straps must be able to support five thousand lbs. per worker attached if they are being used as part of a fall arrest system.

Beam clamps and trolleys

Structural steel is a good option when looking for anchor points to be used on beams. If your work is static in location then you can get a beam clamp but if you have to travel then you will need to use a beam trolley. Both the beam clamp and the beam trolley work under the same principle in which they are tightened around a wider part of the beam. Trolleys have rollers to move around.

Mobile anchors with weights

These are similar in design and look to fall protection stanchions which penetrate the membrane of the roof to be attached to the steel below. The mobile whited roof anchor performs the same work without penetrating the roof. The weights are divided into manageable sizes and are moved in a cart from one place to another. The catch here is to ensure that your employees in Australiaare trained in assembling the equipment. While not difficult, the assembly is more involved when tightening a clamp or wrapping a strap around a beam.

Door bars

When choosing roof anchor points in Australia, you can use the door bars. This is a metal bar that can be adjusted in size and wedged into place on one side of the window or door jamb from where the work is taking place. When used properly, it can be easy quick and effective.