How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-17 · 7 min read · Independent comparison
• Rockville RC1DTRS biggest strength: Splits a single 1/4" TRS output into two 1/4" TRS outputs, so two people can monitor the same source at once.
• Rockville RC1DTRS biggest trade-off: It's a splitter, not a replacement cable — it won't revive a headphone whose own cable is broken, and it only works with 1/4" TRS gear.
• GOWENIC Headphones Replacement Audio biggest strength: A purpose-built replacement cable for Pioneer DJ HDJ-CUE1, CUE1BT, X5, X7 and S7 headphones, with a locking headphone-end connector and a 3.5mm-to-6.3mm adapter.
• GOWENIC Headphones Replacement Audio biggest trade-off: Its compatibility is narrow — it's built around those specific Pioneer DJ models, not a universal fix for any headphone.
• Choose Rockville RC1DTRS if you're a producer, engineer or DJ who needs to feed two pairs of 1/4" headphones from one interface or mixer output.
• Choose GOWENIC Headphones Replacement Audio if your Pioneer DJ HDJ-series cable has failed and you want a plug-and-play replacement that also stretches to about 2 meters.
The Rockville RC1DTRS is a 1-foot splitter cable: one 1/4" TRS male plug on one end, two 1/4" TRS female jacks on the other. That's the whole idea, and it's a genuinely useful one. If you've ever tried to hand a single pair of studio headphones back and forth during a session, you already know the problem this solves. Plug the male end into your interface or mixer's headphone out, plug two pairs of 1/4" headphones into the female ends, and two people can listen to the same mix at the same time.
The spec sheet backs up the "pro audio" framing. It uses 100% copper conductors, 26 AWG wire, and a 90% OFC spiral shield for EMI and RFI rejection, wrapped in a rugged PVC jacket. For a short run like this, that shielding is more about keeping the cable quiet in a rack full of gear than about long-distance signal integrity. The connectors are described as snug-fit and plug-and-play, and the cable is listed as compatible with 1/4" TRS gear including Focusrite and PreSonus interfaces.
Who should skip it? Anyone whose actual headphone cable is broken. This is not a replacement cable for a specific headphone model — it's a splitter. If you own a headphone with a captive, non-detachable cable, this won't help you. And if all your gear is 3.5mm, you'd be dealing with adapters on top of adapters, which is a worse experience than buying the right cable in the first place. Also note the 1-foot length: it's meant to sit right at the jack, not to run across a room.
GOWENIC Headphones Replacement Audio: Who It's For
The GOWENIC Headphones Replacement Audio cable exists for one job: replacing the cable on a Pioneer DJ HDJ-CUE1, HDJ-CUE1BT, HDJ-X5, HDJ-X7 or HDJ-S7 headphone. If your original cable has died — crackling, a dead channel, a frayed spot near the plug — this is the direct swap.
The details matter here. There's a locking mechanism at the headphone end, which is exactly what you want on a DJ headphone, because the last thing you need mid-set is a cable popping out when you turn your head. The other end is a 3.5mm stereo plug, and the package includes a 6.3mm adapter plug, so the same cable works with a phone or laptop and with a mixer or interface that uses a 1/4" jack. That adapter is the difference between carrying two cables and carrying one.
The cable uses an OFC (oxygen-free copper) core with individual shielding for left, right and mic channels, which the spec sheet frames as reducing electrical noise interference. It's an extendable spring cable: roughly 1.2 m unstretched and about 2 m stretched. For DJ booths and studios, that's a smart design — it stays short and out of the way when you're close to the gear, then stretches when you step back. The description also notes it resists knots and tangles and is soft and easy to store.
Who should buy it? Pioneer DJ HDJ-series owners whose cable has failed, or anyone who wants a spare to keep in the gig bag. The 3.5mm-plus-adapter setup also makes it convenient if you move between a phone and a mixer.
Side-by-Side: Which Should You Choose?
• Best for splitting one signal to two listeners → Rockville RC1DTRS. That's its entire purpose, and nothing in the GOWENIC cable does this.
• Best for replacing a broken Pioneer DJ HDJ cable → GOWENIC Headphones Replacement Audio. Purpose-built fit and a locking connector.
• Best for connection security at the headphone end → GOWENIC Headphones Replacement Audio. The locking mechanism is a real advantage for DJ use.
• Best for rack and interface gear with 1/4" jacks → Rockville RC1DTRS. Male 1/4" TRS to dual female 1/4" TRS, no adapters needed.
• Best for flexibility in cable length → GOWENIC Headphones Replacement Audio. It stretches from about 1.2 m to roughly 2 m, versus the Rockville's fixed 1-foot length.
• Best for plugging into a phone or laptop → GOWENIC Headphones Replacement Audio. The 3.5mm plug with a 6.3mm adapter covers both consumer and pro jacks.
• Best for studio and DJ cueing without changing headphones → Rockville RC1DTRS. Dual monitoring from a single output, in a compact 1-foot form.
• Best if you just want a spare cable for your HDJ headphones → GOWENIC Headphones Replacement Audio. Keep one in the bag so a failure never ends your session.
In my opinion, these aren't really competitors — they're answers to two different questions. If you're setting up a studio or DJ booth and want two people monitoring the same source, I'd buy the Rockville RC1DTRS; it's short, shielded, and does exactly one thing well. If your Pioneer DJ HDJ headphone cable has failed, I'd buy the GOWENIC Headphones Replacement Audio instead, because a splitter can't fix a broken headphone cable no matter how good it is. The deciding factor is the problem in front of you: splitting a signal, or replacing a cable. Before you commit, check the current price on Amazon using the button on this page.
No. It's a splitter — one 1/4" TRS male to two 1/4" TRS female. It lets two pairs of 1/4" headphones share one output and won't repair a headphone with a broken or non-detachable cable.
Only if you own a Pioneer DJ HDJ-CUE1, HDJ-CUE1BT, HDJ-X5, HDJ-X7 or HDJ-S7. It's built specifically around those models with a locking headphone-end connector, so it isn't a universal replacement for other brands.
Yes. It ends in a 3.5mm stereo plug and ships with a 6.3mm adapter plug, so it covers consumer devices and pro gear with a 1/4" jack. The cable is also extendable, roughly 1.2 m to 2 m.
That depends entirely on your need. If you're splitting a signal, only the Rockville RC1DTRS does the job; if you're replacing a broken HDJ cable, only the GOWENIC cable does. Check the current price on Amazon for both before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.