Here you can learn how to reset my Epson printer
Having problems with your Epson printer? If yes, then don't worry as here you will get the accurate information about the same. Epson printers are the best quality printers and are used for printing, scanning and much more. They have built-in software or firmware that counts the number of prints used by the printer. Each Epson printer model has a set limit, beyond which an intermittent message is displayed informing you as "The printer needs maintenance". This message will keep flashing until you reset the internal counter, this period is called overflow. We can reset all brands and types of Epson printers without problems. Everyone is wondering how to reset Epson printer, but it is easy to do it. If you want to do that, you need to follow the steps mentioned below.
Open the "Control Panel" of your Epson printer, usually it is very close to the digital display.
Next, you should find the button that says "Pause" or "Reset".
After that, you need to hold it down for about 5 seconds and the counter will reload.
Test if the counter has now started from the first print.
This shouldn't take you more than two minutes to complete. Also, many times you may not be able to locate the Pause or Reset button. If you can't find it, know that this is what you can do:
First, you need to press the "On/Off" button on your printer and hold it for 4-5 seconds.
This will remove the timer and completely reset the printer.
Once you have finished either of the above two ways, you can now check the timer and you can repeat the action (reset the printer) until you see that the timer has restarted from 0. You should also check as a good practice if your Epson printer driver printer is up to date, older and corrupted drivers can also cause a flashing message on your Epson printer informing you that something is missing from the printer. And you should restart it.
Resetting an Epson printer also has several different aspects than simply resetting the machine, it also includes resetting the printer's ink cartridge and reinstalling the printer if necessary. In this post we are going to give you information about these so that your task of resetting the Epson printer is complete and fruitful. Here you should know:
It only takes a few minutes to reset the printer ink cartridge. This eliminates the annoying ink level signal warnings that pop up every time you try to print something. To do this:
First, place the chip reset device on a table with the flat side facing down and the notched area facing up. Make it accessible.
Now push the cartridge into the device so that the metal tabs on the cartridge line up with the tabs on the reset device.
As soon as there is a contact, a red light will turn on the device.
Press and hold the ink cartridge in the device until the green light comes on.
Carefully remove the cartridge from the device.
You can now complete the loop by running a soft or hard reset (as mentioned above) on your printer.
By following these processes, you can also replace the ink cartridge if you have any problems.
If the ink cartridge resets once, you can now turn off the computer and the printer and disconnect both (removing both connection cables). Turn off your Epson printer by pressing the power button.
Now reconnect the power cable and also connect the printer to the computer.
Check if the Epson printer is now reset and continue with your print job.
Now follow this step to reinstall your Epson printer:
Turn off your printer and also disconnect it from the computer.
Click "Start" and choose "Print and Fax" option, Windows users should click "Device and Printer".
Right click on "Printer" and select the "Delete" option. Windows users can right click on "Printer" and choose "Remove device" option.
Now restart your PC.
Now connect your printer to PC and turn it on.
Also, Windows will automatically reinstall and detect your Epson printer driver and get the printer working.
Hopefully all these steps will help you to reset Epson printer, follow these points to reset it. However, if you're still getting alerts and after resetting them over and over again, things aren't looking any better. So you can get help from the technical expert of the printer.
How to reset Epson printer to factory settings?
If you are experiencing problems with your Epson printer, you may need to perform a factory reset of the printer as part of the troubleshooting step. A factory reset will return your Epson printers settings to when you first used them. This step will help you to restore the factory default settings of the printer.
There are several ways to reset your Epson printer to factory settings. Some of them are given below
Using the Epson printer control panel:
First, you need to go to the Start menu in the printer's Control Panel.
Next, you need to use the left and right buttons to open the settings menu.
After that, press the OK button.
Now, to find the option to restore default settings, you can use the left and right navigation buttons and press the OK button.
In the same way, to restore the network settings, you can use the up and down detection button and press the OK button.
In the end, you need to restart your printer.
Reset with the help of the Reset button:
First of all, you need to turn off your printer with the help of the power button.
Next, you need to press and hold the reset button located on the back of the printer.
Power on the printer but hold down the reset button for at least 5-10 seconds.
Then release the reset button after the warning page prints.
Finally, you must use this IP address to redesign the printer on the system.
Reboot with the help of the printer setup program:
First, download and install the latest version of the printer setup program on your computer.
After this, open the printer setup program on your system.
Click the Select option to create a required option.
Now, in the Select menu, select the model number of your printer and the port that the printer is connected to the device.
After that, click on the OK button.
The adjustment and maintenance window will open. Choose the waste ink pad counter option in the maintenance section.
Now the adjustment and maintenance window will open. In it, choose the waste ink pad counter option in the maintenance section.
After that, click on the OK button.
Once you check the main ink pad counter option and click the Start button at the bottom right corner.
After that, click the Finish button to finish the reboot process.
Now restart your printer.
Hopefully, you have found the best way to reset your Epson printer to factory settings. If you still have any queries or need help, you can contact the support team for reliable and instant assistance.
Method 1: Using the printer's control panel
To factory reset the printer using this method, you need to follow the steps mentioned below:
Open the Start menu in the printer's Control Panel by pressing the Start button.
Use the left and right navigation buttons to open the Settings menu. Then press the OK button.
Use the left and right navigation buttons to find the Restore Default Settings option and press the OK button.
Similarly, use the up and down navigation buttons to find Restore network settings and press the OK button.
Reboot your printer.
Now, you have successfully reset the printer to its factory settings.
Method 2 – Use the reset button
All Epson printer models have a factory reset button on the back of the printer body that can be used to reset the printer to factory settings. The steps to factory reset the printer by this method are:
Turn off the printer with the power button.
Use a pin to hold down the Reset button on the back of the printer.
Power on the printer but hold down the Reset button for at least 5 seconds.
Release the Reset button after a warning page prints. After a few seconds, another page will print with the printer's default IP address.
Use this IP address to reconfigure the printer on the computer system.
This method takes less than a minute to factory reset the printer and is used frequently.
Method 3: Using Epson's adjustment program
This method is useful when the buttons on the printer do not work. Resetting the printer using this method takes a bit longer, but this method is very easy to follow. The steps to follow to reset the Epson printer to factory settings using this method are:
Download and install the latest version of Epson's tuning program on your computer system.
Open Epson Adjustment Program on your computer system.
Click the Select option to make the necessary selections.
From the Select menu, select the model number of your printer and the port where the printer is connected to the computer system.
Click the OK button.
The Adjustment and Maintenance window will open. Select the Waste Ink Pad Counter option in the Maintenance section.
Click the OK button.
Now check the Main Ink Pad Counter option and click the initialize button at the bottom right corner.
Click the Finish button to end the reset process.
Reboot the printer for the settings to take effect.