Windows 10 error code 0xc00000f specifies a Boot Configuration Data (BCD) problem. You see this error message on your screen saying with few suggestions that your PC needs to be repaired.
Here in Windows 10, you will find few promising solutions for repairing Error code 0xc00000f. Checking and repairing your computer, fixing or rebuilding the Boot Configuration Data and creating EFI system partition are the main workarounds in this concern.
Either of the following solutions may fix the issue so follow each one carefully. All the methods are working so anyone can let your Windows to back in the normal state keeping data safe.
In normal cases, the USB inserted in your PC or laptop ports can cause this problem. To eject the USB or cables and reboot your PC and see if you’re lucky.
Before proceeding, make sure your hardware doesn’t create the problem for you. So run the chkdsk tool, and first, check your hard drive.
Step 1 -Insert your CD / DVD installation into drive and power on your PC first of all. Select Repair from the bottom part of your computer after setting the appropriate language, keyboard, etc.
Step 2-Single the installation drive for Windows, which is commonly C:\, and click Next.
Step 3 – Using these options, start Command Prompt after the System Recovery Options screen comes into view. Type and execute the following command by pressing Enter-
chkdsk C: /f
Allow it to complete the process and see if any fault in your hard drive.
Simply using Repair your computer is enough to repair error code 0xc00000f many times in Windows 10. To do this, make sure you have a legitimate Bootable media in either USB, Flash Drive, or CD / DVD.
Step 1 – Insert the CD / DVD and select Language from the respective dropdowns to install, time and currency format, and keyboard input method, then press Next.
Step 2-Choose from the Setup wizard to repair your computer. Allow the tool to fix the problem, and see if less error starts in your system.
If you are holding a bootable CD / DVD / Pen Drive / USB, it is OK otherwise, if it is not available, create one using the following guide – Step 1 – Place the installation media equipped with USB / pen / Drive DVD / CD into the port or optical DVD drive.
Step 2 – Reboot your PC and press F2 (The key varies from PC to PC, need to press F3 or F4, or Esc or Del). Once you have the BIOS screen, select Correct Boot Order.
Step 3 – Set your USB / pen / Drive DVD / CD name in the 1st Boot Device row, whatever it is.
Step 4-Press F10 to save your changed setting and restart your PC. Hopefully, now it will restart in Windows 10 with the installation media and repair Error Code 0xc00000f.
Windows includes the tool bootrec.exe which is used to reconstruct BCD. After you rebuild it, the boot configuration data successfully controls the start-up process.
Step 1-Re-enter the genuine bootable CD / DVD / Pen Drive / USB with Windows installation and start PC. When a key is requested by the screen then press it to continue the booting process.
Step 2 – Choose a language, keyboard, time, currency and more choose Next.
Step 3-Single the operating system that you need to repair and select Next. Now you’re in the recovery environment so select Prompt Command.
Step 4 – The black panel is found, so type bootrec.exe and press Enter. This will rebuild the configuration data for the boot and return your PC to normal condition.
If the solution doesn’t work, delete the old BCD and rebuild it again. For this purpose, run the following commands one by one –
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd –s –h –r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
Allow the commands to execute so that it may restart without the error.
This method will help you unmask the data file for boot configuration and its parent partition. You will repair the BCD file with this process, or build a new one from scratch.
Here Windows10 installation media is required on a USB / Pen / Flash drive formatted with a FAT32 filesystem.
If it is unavailable, you can create a new EFI partition in just a few steps. This requires only a Windows install media and free disk space of at least 200 MBs.
To this end, follow Solution 3 to create a Windows 10 install media and boot from a USB, and then access the Command Prompt black panel.
Finally, restart your computer and check. It should get fixed now.
Closing words
So those are the authentic solutions in Windows 10 to repair Error Code 0xc00000f. The methods work pretty well for Windows 8, too.