If you are an engineering consultancy firm then you are already aware of FEA and CFD analysis. These are terms that are related to fluid dynamics and analysis. Expert consultancy teams are aware of the benefits of each when implemented in any project.
You can look for CFD & FEA Services in UAE/Dubai if your workplace is related to any engineering project. Based on the specific project purpose, you have to decide right analysis implementation- FEA or CFD.
Flow pattern and visualization
When it comes to flow pattern engineering then CFD proves helpful. Using this technology it is easy to analyze flow patterns. This helps study the flowing liquid velocity and other factors. It is also helpful for studying the temperature distribution.
This technology proves effective when designing vent and duct pipes
It becomes easy for engineers to study the complex liquid flow behavior
Even when designing SUVs or vehicles this proves effective technology
Strain and stress Analysis
This is where you may find FEA technology more useful. Using this technology engineers and designers can identify high strain and stress accumulation areas with prototype product design. You have to keep in mind that CFD & FEA Analysis in Oil and Gas field proves highly effective in identifying the right prototype for accessories and pipes.
The same technology is also used by the engineers who design components for use in these industries. The study helps design the right components that can withstand any harsh work conditions. It also helps in design optimization.
Holistic analysis
This area is where engineers find both these technologies useful. The two technologies combined help evaluate engineering design problems and issues. If any engineering field makes use of aerodynamics then FEA and CFD technologies are useful.
The analysis produced using these two technologies helps understand structural components. Later designing team can improve design based on the outcomes of testing. This means after prototype analysis the team can produce a better
Understand structural defects
Engineers need to identify the thermal and structural defects in any prototype design before mass producing any product. The identification has to be done by the team in the initial development stage. These defects are not easy to identify visually when inspecting the prototype.
This means that combined Car Park Ventilation CFD Analysis or oil field analysis may not be complete if these defects are not identified during the development stage. The two technologies prove very effective in identifying these defects during the prototype development stage. The best team will use the technologies to help improve product design quality.
For more information, you can visit our website https://www.renewtherm.com/ or call us at +971-506180620/+91-9884791650