How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-07 · 7 min read · Independent comparison
• Remtise Acoustic Tube Earpiece — biggest strength: an acoustic tube design paired with a plated metal two-pin connector (2.5mm + 3.5mm, 5mm pin spacing), a 20 Hz–20,000 Hz dynamic driver, and a coil cable rated to 5 KG of tensile strength. It ships as a two-piece kit with two medium earmolds.
• Remtise Acoustic Tube Earpiece — biggest trade-off: it's built around Motorola two-way radio compatibility (BPR40/CP/CLS/DTR/PR/RDU/RMU and more), so it's not a general-purpose audio headset for your laptop or phone.
• Generic 2 — biggest strength: simple and versatile-looking — a 2-pin M1 connector, clear sound, a sensitive PTT and mic, and a reinforced TPU cable in a single-headset package.
• Generic 2 — biggest trade-off: you get one headset and no spare earpiece or earmolds, the cable is TPU rather than a high-tensile coil, and the listed compatibility is a narrower Motorola model list.
• Who each pick is for: Remtise for radio users who want a durable, spare-included kit and clear audio in loud rooms; Generic 2 for someone who just needs one working in ear headset with a PTT at a minimal commitment.
The Remtise Acoustic Tube Earpiece is a wired surveillance-style headset built around a transparent acoustic tube. That tube is the whole point of the design: it carries sound from a small driver up to the earpiece so you can still hear what's coming through the radio clearly when the room around you is noisy. In my opinion, that makes it a natural fit for anyone who spends a shift in a loud, busy environment — a mall floor, a warehouse, a hotel front desk, a restaurant, a bar, a construction area — where you can't hold a radio up to your ear every time someone calls you.
The hardware details matter here too. The connector is a two-pin standard setup with 2.5mm and 3.5mm pins spaced 5mm apart, and it's electroplated metal rather than plain plastic, which is meant to resist oxidation and keep contact reliable over time. The clip is designed to hold tight and not slip off mid-shift, and the coil cable is a strong PU build rated to 5 KG of tensile strength, so it stretches and flexes without feeling fragile. The dynamic driver covers 20 Hz to 20,000 Hz, which is a full-range spec for voice work. It's wired, it uses the 2.5mm jack, and there's no active noise cancellation — the acoustic tube does the isolation work instead.
Generic 2: Who It's For
Generic 2 is the straightforward option: a two-pin ear bud in ear headset with a PTT microphone, a coil ear piece, and a reinforced TPU cable. The feature list is short and honest — clear sound, a sensitive PTT and microphone, and that reinforced cable. It uses a 2-pin M1 connector and a 3.5mm jack, and it's wired, with no noise cancellation and a push-button control method for the PTT.
The compatibility list is where this one lives or dies, so check it carefully. It covers a long spread of Motorola families: CLS, CP, XTN, AX, XV, XU, GP, SP, CT, DTR, RDX, plus GTI, GTX, LTS2000, VL130, PMR446, ECP100 and Mag One BPR400. If your radio is on that list, this is a simple, low-commitment way to get an in ear headset with a working PTT.
The trade-offs are equally clear. You get one headset — no spare earpiece, no extra earmolds. The cable is reinforced TPU rather than a high-tensile coil, so it's a reasonable everyday build but not the heavy-duty spec you'd want if you're stretching a cable all day. The earpiece shape is rounded tips, and the enclosure material is TPU. Who should buy it: someone who needs one functional radio headset, wants a coiled ear piece that stays put, and doesn't care about spares. Who should skip it: anyone who wants a two-pack, wants backup earmolds, or wants the acoustic tube isolation approach for genuinely loud environments.
Side-by-Side: Which Should You Choose?
• Best for a complete kit → Remtise Acoustic Tube Earpiece. Two earpieces and two pairs of medium earmolds versus a single headset.
• Best for loud environments → Remtise Acoustic Tube Earpiece. The acoustic tube is designed to transmit clear sound even in noisy settings.
• Best connector build → Remtise Acoustic Tube Earpiece. Electroplated metal two-pin connector with anti-oxidation design to avoid poor contact.
• Best for a simple single-headset setup → Generic 2. One headset, sensitive PTT and mic, reinforced TPU cable, nothing extra to manage.
• Best for broad Motorola model coverage on paper → Generic 2. Its list explicitly names CLS, CP, XTN, AX, XV, XU, GP, SP, CT, DTR, RDX and more.
• Best if you want a coiled ear piece with a push-button PTT → Generic 2. Coil ear piece plus push-button control, in a compact wired package.
• Best for sound isolation without active noise cancelling → Remtise Acoustic Tube Earpiece. No ANC on either, but the tube design is the one aimed at blocking out the room.
In my opinion, the Remtise Acoustic Tube Earpiece is the one I'd buy. Here's my reasoning: it's a complete kit, the acoustic tube is purpose-built for clear voice in loud rooms, and the electroplated connector plus 5 KG coil cable tell me the build is aimed at daily shift work rather than occasional use. For webinars, where a presenter or moderator needs to hear cue calls and coordination chatter over a busy room, that combination matters — this is closer to a headphone for webinars setup than a bare-bones earbud. Generic 2 is a fine, simple choice if you only need one headset and your radio is on its list. Just check the current price on Amazon before you decide, since that's the one thing neither spec sheet can tell you.
An in ear headset is a wired earpiece that sits inside your ear rather than over it. Both products here are in ear designs: Remtise uses a rounded-tip earpiece fed by an acoustic tube, and Generic 2 uses rounded tips on a coil ear piece. Each also includes a microphone and a PTT for two-way radio use.
What is over ear headset?
An over ear headset has cups that sit around or on top of your ear instead of inside it. Neither product in this comparison is over ear — both are in ear, wired, and built for two-way radios with a 2.5mm or 3.5mm jack. If you want an over ear model, you're looking at a different category entirely.
The main differences are the kit contents and the build. Remtise ships two earpieces and two pairs of medium earmolds, uses an electroplated metal two-pin connector and a PU coil cable rated to 5 KG. Generic 2 ships one headset with a reinforced TPU cable and a sensitive PTT and mic.
Fit the earpiece into one ear with the rounded tip pointed into your ear canal, then route the cable over the top of your ear and down behind it so it stays put. Clip the cable to your clothing for slack, and position the PTT where your hand naturally rests. Both headsets here are single-ear designs meant to leave your other ear open.
• Fachixy FC100 vs Crotrain One Ear Headset
• P&LLL Mini Single Earbud vs Bawjog KZ Sora High-Fidelity
• our RCA Wave-56 vs GNMN Active Noise Cancelling pick
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.