How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a lighter headset with a cleaner mic pickup and console-first tuning, choose Razer BlackShark V2; if you need a glasses-friendly fit with a flip-to-mute boom mic, choose Turtle Beach Atlas 200. Both are wired 3.5 mm headsets with 50 mm drivers, so the real split comes down to comfort engineering and mic control.
• Razer BlackShark V2 biggest strength: TriForce Titanium 50 mm drivers with a HyperClear Cardioid mic and a light 240 g build — a strong pick if you want clarity and long-session comfort without much weight.
• Razer BlackShark V2 biggest trade-off: The mic is bendable but has no flip-to-mute function, and its primary tuning target is Xbox, so other platforms lean on the 3.5 mm jack alone.
• Turtle Beach Atlas 200 biggest strength: A floating headband, ProSpecs dual-foam cushions built for glasses wearers, and a flip-to-mute uni-directional mic — comfort and quick mute in one package.
• Turtle Beach Atlas 200 biggest trade-off: At roughly 280 g it's heavier, it has no noise isolation feature, and it carries a shorter warranty term.
• Who each is for: Razer for the competitive player who values lighter weight and a tightly focused voice pickup; Turtle Beach for the all-day player who wears glasses and wants to mute by flipping a boom.
The BlackShark V2 X is built around one idea: get the audio right and stay out of the way. Its TriForce Titanium 50 mm drivers are split into three tuned zones — highs, mids and lows handled separately — which in practice means dialogue and footstep-type detail sit forward while low-end still lands with weight. The frequency range runs 20 Hz to 40,000 Hz at 32 ohm impedance, so it's an easy load for a controller, a phone or a motherboard jack.
Comfort is where it earns its place. At 240 g it's genuinely light, and the leatherette memory foam cushions plus thicker headband padding are aimed at tournament-length sessions. The closed earcups give passive noise cancellation by sealing over your ears, which helps in a noisy room without any battery or active circuitry involved. The HyperClear Cardioid mic tapers off toward the back and sides, so it picks up more of your voice and less of the room, and the bendable boom lets you park the sweet spot right at your mouth.
Buy it if you play on Xbox Series X|S first and want a light, isolation-focused headset with a mic that rejects background noise. Skip it if you specifically want a mute switch on the mic itself — the BlackShark V2 has no flip-to-mute, so muting happens through your platform or the control method on the headset. It's also worth knowing it ships with a 2-year manufacturer warranty, which is the longer of the two here.
Turtle Beach took a different route: fit first, then features. The Atlas 200 uses a floating headband that self-adjusts across the top of your head, and the 50 mm Nanoclear drivers handle the audio side with a 32 ohm, dynamic driver design and a 3.5 mm wired connection. It's a multiplatform headset by intent — Xbox Series X|S, Xbox One, PlayStation and PC all connect through the same standard jack.
The standout detail is the ProSpecs dual-foam ear cushion system, which is designed so glasses wearers don't get pressure pushed into the arms of their frames. If you've ever had a headset clamp down on your temples after an hour, this is the exact problem it targets. The oval earcups are wrapped in a mix of ABS, mesh cloth, polycarbonate, polypropylene and thermoplastic polyurethane, and the colorway is Lilac Mist if that matters to your setup.
The mic is uni-directional and flip-to-mute — flip it up and you're muted, flip it down and you're live. That's a faster, more tactile mute than reaching for a software toggle. On the flip side, there's no noise control feature listed at all, so isolation comes down to how well the cushions seal for you, and Turtle Beach rates the warranty at 1 year. It's also the heavier headset at roughly 280 g — around 40 g more than the Razer.
Buy it if you wear glasses, want an auto-adjusting fit, and prefer a physical mute gesture. Skip it if you need passive noise isolation as a stated feature or you're chasing the lightest possible build.
Side-by-Side: Which Should You Choose?
• Best for glasses wearers → Turtle Beach Atlas 200. The ProSpecs dual-foam cushions exist specifically for this.
• Best mic for noisy rooms → Razer BlackShark V2. A cardioid pickup pattern rejects more sound from the back and sides.
• Best for instant muting → Turtle Beach Atlas 200. Flip-to-mute beats hunting for a toggle mid-match.
• Best for sound isolation → Razer BlackShark V2. Closed earcups and a sealing cushion design give passive noise cancellation; the Atlas 200 lists no noise control.
• Best for a self-adjusting fit → Turtle Beach Atlas 200. The floating headband removes manual sizing guesswork.
• Best for Xbox-first players → Razer BlackShark V2. It's tuned and styled as an Xbox headset, with the 3.5 mm jack covering PS5, PC and Switch.
• Best for a broad multiplatform setup → Turtle Beach Atlas 200. Xbox, PlayStation and PC are all named as targets out of the box.
In my opinion, the Razer BlackShark V2 X is the headset I'd buy for most people. It's lighter, it isolates better, and its cardioid mic does more of the work for you in a room that isn't quiet. The 2-year warranty is the extra nudge. I'd only switch to the Turtle Beach Atlas 200 if you wear glasses or you want that flip-to-mute gesture badly enough to trade away some isolation and accept a bit more weight. Neither is a bad wired headset — they're just built for different heads.
How to use wired gaming headset on pc
Plug the 3.5 mm jack into your PC's headphone or combo audio port, then set the headset as the default playback and recording device in your sound settings. Both the BlackShark V2 and Atlas 200 use a standard 3.5 mm wired connection, so no adapter or pairing step is involved.
How to use titan wired led gaming headset
That's a different product from the two here. For the headsets on this page, the setup is the same principle: connect the 3.5 mm jack to your device, then confirm the input and output are routed to the headset. There's no software requirement listed for either model to produce audio.
Are wired gaming headsets better
Wired headsets carry no battery, so there's nothing to charge and no runtime limit — both of these run purely off the 3.5 mm connection. Whether that's "better" depends on you: wired suits stationary setups on console or PC, while wireless suits people who move around. On pure reliability of connection, wired has the simpler story.
How to connect wired gaming headset to pc
Match the 3.5 mm plug to the corresponding jack on your PC — a combo port if your machine has one, or the headphone and mic ports separately if it doesn't. Once connected, check your audio settings so the headset is selected for both output and input. Both models here list a standard 3.5 mm jack and multiplatform compatibility, so the process is identical for each.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Turtle Beach Atlas 200 vs KHAZNEH H-10, Astro A10 vs Turtle Beach Atlas 200, PowerA Headset vs Turtle Beach Atlas 200