Hi guys, I have a little problem with the Queclink gl300. I try to set it up with the latest manage tool version R2.2, unfortunately I get a timeout message every time the com connection fails. I have this problem with 2 devices. all other gl300 devices that I have are fine I installed it without any problems. I have also tried to do an upgrade with an upgrade tool version 2.31 and 2.36 also this does not work I keep getting a flash error code as follow: FAIL, COM: 3, FlashToolError: 2006, S_BROM_CMD_STARTCMD_TIMEOUT.
I mean the manage tool version 2.41 ask me a password not the device it self. For the device I connot connect it to the COM because a timeout issue, I dont know why it gets timeout. I want to make sure to set it up with protocol and firmware on the device.
Queclink Gl300 Manage Tool Download
Download Zip 🔥 https://tiurll.com/2y67CD 🔥
I have found this List of firmwares, flashtools and management-tools: . I was able to remove the password with the Firmware Upgrade Tool Duplex 2.36 and the correct firmware. One can just follow the flash manual. The important thing is too choose "Flash Firmware and remove User Data" in the flashtool.
Make sure you have the correct "Doc_and_Tool" as well, because you can only reconfigure your device with the Manage Tool in that package.
Have fun!
Now you need a UART to USB (or M) datacabel for Queclink that is not included in every delivery of the Queclink GL300.
Than you can flash the firmware with the Firmware_Upgrade_Tool_Duplex and delete user data.
Afterwards you can reconfigure the Device with the management tool.
You can now use our tracker management to update the firmware of queclink's GL300 & GL320 GPS trackers over the air. This way you save time maintaining your tracking devices as there is no physical connection needed to the management tool and you can update multiple devices at the same time.
Gl300 manage tool user guide tracgl300mt001 - 2 - contents contents ............................................................................................................................................ 2 1. Revision history ........................................................................
Gl300 manage tool user guide tracgl300mt001 - 3 - 3.2.19 set the parameters of network select ..................................................................... 37 3.2.20 set the parameters of voice monitor ...................................................................... 38 3.2.21 set the p...
Gl300 manage tool user guide tracgl300mt001 - 5 - 2. Gl300 manage tool interface gl300 manage tool is pc software which can be used to configure gl300 through data_cable_m. It is easy for the backend server developers to configure gl300 with manage tool, which has friendly user interface. The correc...
Gl300 manage tool user guide tracgl300mt001 - 11 - [save all configuration]: it is used to save all configurations in command operation space to file. [connect/disconnect to com]: it is used to connect/disconnect to com manually. 2.4.4 status bar there is system status and current status in status b...
Gl300 manage tool user guide tracgl300mt001 - 13 - 2.5. Operation result interface 2.5.1 operation successfully interface command read ok. Command send ok. 2.5.2 operation failed interface there should be com port connection problem if the fail reason is timeout. Queclink confidential.
Gl300 manage tool user guide tracgl300mt001 - 14 - there should be com port is occupied. Please close all other com-related applications. Please change to correct device password if password error. There are some issues with this com, please check your com wire or port. Queclink confidential. 17dc91bb1f
grade 8 science module pdf free download