Requirements: You need to have a Qualcomm Chipset Powered device to QPST Flash Tool. If in case your device is not powered by Qualcomm, then the following tutorial will not work for you.
Congratulations! You just learned to use QPST Tool to Flash or Install Stock Firmware on the Qualcomm Devices.Notes[*] The above tutorial will only work on the Qualcomm devices which use a NOR and NAND Flash device. For a NAND Flash, a single-image download can send the NAND boot loader, the phone image, or both to the phone. You can download a boot loader only to a phone that uses NAND Flash.
Qpst Software Download Tutorial
Download Zip 🔥 https://urloso.com/2yGB49 🔥
[*] Caution: Flashing any Firmware using the QPST Tool will erase your Personal Data from your Qualcomm device. Therefore, we recommend you take a backup of your data before using the QPST Tool.
[*] Please note that the instructions in the tutorial only apply to Qualcomm devices that utilize a NOR and NAND flash device. If your device has a NAND flash, you can opt for a single-image download to send the NAND boot loader, phone image, or both to your phone. However, it is important to remember that you can only download the bootloader to a phone that uses NAND flash.
After some research, I narrowed it down to my second mistake: I restored all partitions from my backup, including EFS. As far as I understand it, this means that I flashed unique hardware information from my old phone to my new one, where it is useless and leads to errors.
I just purchased a FP2 on Ebay and decided the first thing I would do is attempt to put a custom ROM on it. Being new to android ROMS I went with LineageOS and followed this tutorial on installing LineageOS. After doing so I inserted my SIM card and was greated to my IMEI1 and IMEI2 being all zeros. After this I rooted the system with Magski then I put TWRP on it through the app. Opening up TWRP I was greeted to no EFS partition in the backup which lead me to believe my problem is not having an EFS partition!!!
If anyone has any advice or can link to any resources to help that would be much appreciated. If you are willing to backup your persist.img and upload it or send it to me or have any ideas on how this could be done, please reach out or comment.
[*] tutorial will only work on the Qualcomm devices which use a NOR and NAND Flash device. For a NAND Flash, a single-image download can send the NAND boot loader, the phone image, or both to the phone. You can download a boot loader only to a phone that uses NAND Flash.
[*] Caution : Flashing any Firmware using the QPST Tool will erase your Personal Data from your Qualcomm device. Therefore, we recommend you to take a backup of your data before using the QPST Tool.
[*] Alternative : There are several alternative tools are available that allows you to flash stock firmware on your Qualcomm Device including QFIL Tool, UMT QcFire, CM2 QLM and Avenger Qualcomm. 152ee80cbc
download tema 7 kelas 5 revisi 2017
bmw m3 challenge download windows 10