What You Need
Before you start flashing your phone, you will need the following things:
A Samsung E2202 phone with a charged battery.
A USB data cable that can connect your phone to your computer.
A computer with Windows operating system and a USB port.
Flash Loader 7.4.7 SSG v0.1 Lite software, which you can download from [here] or [here].
The firmware file for Samsung E2202, which you can download from [here].
The driver for Samsung E2202, which is included in the Flash Loader 7.4.7 SSG v0.1 Lite software.
How to Flash Samsung E2202
After you have prepared everything, you can follow these steps to flash your phone:
Extract the Flash Loader 7.4.7 SSG v0.1 Lite software and the firmware file to your computer.
Install the driver for Samsung E2202 by running the setup.exe file inside the Flash loader 7.4.7_SSG_v0.1_Lite folder.
Run the Flash loader 7.4.7_SSG_v0.1_Lite.exe file inside the same folder.
Select the firmware file by clicking on the Browse button and choosing the E2222XXKC3_OXEKC1.bin file.
Click on the Set Model button and choose E2222 from the drop-down menu.
Turn off your phone and remove the SIM card and memory card.
Press and hold the Volume Down key and connect your phone to your computer via USB cable.
Wait for the software to detect your phone and show a green bar at the bottom.
Click on the Download button and wait for the flashing process to complete.
When the flashing is done, disconnect your phone from your computer and turn it on.
Congratulations, you have successfully flashed your Samsung E2202 with Flash Loader 7.4.7 SSG v0.1 Lite!
Troubleshooting
If you encounter any problems while flashing your phone, you can try these solutions:
If you get an error message like "Error 305" or "Error 306", make sure that you have installed the correct driver for your phone and that your USB cable is working properly.
If your phone does not turn on after flashing, try to charge it for a few minutes and then turn it on again.
If your phone is locked after flashing, you can use these codes to unlock it: [Sim Lock]: 09093233, [Phone Lock]: 02091233.
Sources
[samsung E2222 blinking solve - GSM-Forum]
a104e7fe7e