국제저널

70. Towards successful business model management with analytic network process-based feasibility evalution and portfolio management

Author: Kwanyoung Im, Kihwan Nam and Hyunbo Cho

Journal: Electronic Markets, 2020

DOI : https://doi.org/10.1007/s12525-020-00427-2

69. A graph-based automatic services composition based on cost estimation heuristic

Author: Yunsu Lee, Boonserm Kulvatunyou, Minchul Lee, Yun Peng, Nenad Ivezic

Journal: International Journal of Services Operations and Informatics, 2019

DOI : 10.1504/IJSOI.2019.10025090

68. A Survey on Knowledge Transfer for Manufacturing Data Analytics

Author: Seung Hwan Bang, Ronay Ak, Anantha Narayanan, Y. Tina Lee, and Hyunbo Cho

Journal: Computers in Industry, Vol. 104, p.116-130, 2019

67. Methodology for extracting the delighter in Kano model using big data analysis

Author: Taehun Kim, Taejong Yoo

Journal: Total Quality Management & Business Excellence, 2018, 1-12.

66. A reference activity model for smart factory design and improvementManufacturing Systems

Author: Kiwook Jung;, SangSu Choi, Boonserm Kulvatunyou, K. C. Morris, Hyunbo Cho

Journal: PRODUCTION PLANNING & CONTROL, Vol 28(2),p.108-122, 2017

DOI : 10.1080/09537287.2016.1237686

65. Extraction of Behavioural Requirements for Simulation-based Performance Evaluation of Manufacturing Systems

Author: Junpil Kim, Hyunbo Cho

Journal: JOURNAL OF SYSTEMS SCIENCE AND SYSTEMS ENGINEERING, 2017

64. Performance Challenges Identification Method for Smart Manufacturing Systems

Author: Kiwook Jung, Katherine Morris, Kevin W Lyons, Swee Leong, Hyunbo Cho

Journal: Journal of Research of the National Institute of Standards and Technology, Vol. 121, 2016

63. Using formal methods to scope performance challenges for Smart Manufacturing Systems: Focus on agility

Author: K. Jung, KC Morris, Kevin W Lyons, Swee Leong, H. Cho

Journal: Concurrent Engineering, Vol. 23, Issue 4, p.343-354, 2015

62. A systematic approach for developing a new business model using morphological analysis and integrated fuzzy approach

Author: K. Lim, H. Cho

Journal: EXPERT SYSTEMS WITH APPLICATIONS, Vol. 40, Issue 11, p.4463-4477, 2013

61. Identifying performance assurance challenges for smart manufacturing

Author: Moneer Helu, Katherine Morris, K. Jung, Kevin Lyons, Swee Leong

Journal: Manufacturing Letters, Vol. 6, p.1-4, 2015

60. Virtual reality applications in manufacturing industries: Past research, present findings, and future directions

Author: S. Choi, K. Jung, S. Noh

Journal: Concurrent Engineering, Vol. 23, Issue 1, p.40-63, 2015

59. Mapping Strategic Goals and Operational Performance Metrics for Smart Manufacturing Systems

Author: K. Jung, KC Morris, Kevin W Lyons, Swee Leong, H. Cho

Journal: Procedia Computer Science, Vol. 44, p.184-193, 2015

58. Semantic web-based supplier discovery system for building a long-term supply chain

Author: J. Lee, H. Cho, K. Jeong, B. Kim, Y. Peng

Journal: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, Vol. 28, Issue 2, p.155-169, 2015

57. Assessing business impacts of agility criterion and order allocation strategy in multi-criteria supplier selection

Author: J. Lee, H. Cho, Y. Kim

Journal: EXPERT SYSTEMS WITH APPLICATIONS, Vol. 42, Issue 3, p.1136-1148, 2015

56. Simultaneous control of vehicle routing and inventory for dynamic inbound supply chain

Author: K. Lee, H. Cho, M. Jeong

Journal: Computers in Industry, Vol. 65, Issue 6, p.0166-3615, 2014

55. Multiple-choice knapsack-based heuristic algorithm for the two-stage two-dimensional cutting stock problem in the paper industry

Author: K. Kim, B. Kim, H. Cho

Journal: International Journal of Production Research, Vol. 52, Issue 19, p.5675-5689, 2014

54. Semantic web-based supplier discovery system for building a long-term supply chain

Author: J. Lee, K. Jung, B. H. Kim, Y. Peng, H. Cho

Journal: IJCIM(international journal of computer integrated manufacturing), Published online as doi:10.1080/0951192X.2013.874594, February 2014

Publisher: Taylor & Francis

53. A systematic approach for developing a new business model using morphological analysis and integrated fuzzy approach

Author: Kwanyoung Im and Hyunbo Cho

Journal: Expert Systems with Applications Volume 40, Issue 11, Pages 4463-4477, September 2013

Publisher: Elsevier

52. A Petri Nets based Functional Validation for Services Composition

Author: Taejong Yoo, Buhwan Jeong and Hyunbo Cho

Journal: Expert Systems with Applications Volume 37, Issue 5, Pages 3768-3776, May 2010

Publisher: Elsevier

51. Hybrid Algorithm for Discrete Event Simulation based Supply Chain Optimization

Author: Taejong Yoo, Hyunbo Cho, and E. Yücesan

Journal: Expert Systems With Applications, Volume 37, Issue 3, Pages 2354-2361, March 2010

Publisher: Elsvier

50. Improving Memory-based Collaborative Filtering via Similarity Update and Prediction Modulation

Author: Buhwan Jeong, J. Lee, and Hyunbo Cho

Journal: Information Sciences, Volume 180, Issue 5, Pages 602-612, March 2010

Publisher: Elsevier

49. User Credit-based Collaborative Filtering

Author: Buhwan Jeong, J. Lee*, and Hyunbo Cho

Journal: Expert Systems with Applications, Volume 36, Issue 3, Part 2, Pages 7309-7312, April 2009

Publisher: Pergamon-Elsevier Science Ltd.

48. An Iterative Semi-Explicit Method for Building Collaborative Recommender Systems

Author: Buhwan Jeong, J. Lee*, and Hyunbo Cho

Journal: Expert Systems with Applications, Volume 36, Issue 3, Part 2, Pages 6181-6186, April 2009

Publisher: Elsevier Ltd.

47. Agile Test Framework for Diverse B2B Integration Specifications and Software Solutions

Author: Buhwan Jeong, Jungyub Woo, B. Kulvatunyou*, C. Lee, and Hyunbo Cho

Journal: International Journal of Electronic Commerce, 2007.

46. Web Services-based Parallel Replicated Discrete Event Simulation for Large-Scale Simulation Optimization

Author: Taejong Yoo, Hyunbo Cho, and E. Yücesan

Journal: Simulation Transactions of the Society for Modeling and Simulation International, Vol. 85, No. 7, 461-475, 2009.

45. On the Functional Quality of Service (FQoS) to Discover and Compose Interoperable Web Services

Author: Buhwan Jeong* and Hyunbo Cho, and Choonghyun Lee

Journal: Expert Systems with Applications, Vol. 36, Issue 3, 5411-5418, 2009.

44. JESS-based Web Interface for XML Document Validation

Author: Buhwan Jeong*, Jungyub Woo, B. Kulvatunyou, and Hyunbo Cho

Journal: Expert Systems with Applications, Vol. 36, Issue 1, 683-689, 2009.

43. Support for Seamless Data Exchanges between Web Services through Information Mapping Analysis using Kernel Methods

Author: Buhwan Jeong, D. Lee, J. Lee*, and Hyunbo Cho

Journal: Expert Systems with Applications, Vol. 36, Issue 1, 358-365, 2009.

42. Discovering and Integrating Distributed Manufacturing Services with Semantic Manufacturing Capability Profiles

Author: Jungho Jang, Buhwan Jeong*, B. Kulvatunyou, J. Chang, and Hyunbo Cho

Journal: International Journal of Computer Integrated Manufacturing, Vol. 21, No. 6, 631-646, 2008.

41. Allocation of manufacturers through Internet-based collaboration for distributed process planning

Author: Jungyub Woo, Hyunbo Cho, and B. Kulvatunyou

Journal: International Journal of Production Research, 2008

40. Integration queuing network and IDEF3 for business process analysis

Author: K. Jeong, Hyunbo Cho, D. Philips

Journal: Business Process Management Journal, Vol. 14, No. 4, pp. 471-482, 2008.

39. A Novel Method for Measuring Semantic Similarity for XML Schema Matching

Author: Buhwan Jeong, D. Lee, Hyunbo Cho, and J. Lee*

Journal: Expert System with Applications, Vol. 34, No. 3, 2008.

38. A Kernel Method for Measuring Structural Similarity between XML Documents

Author: Buhwan Jeong*, D. Lee, Hyunbo Cho, and B. Kulvatunyou

Journal: Lecture Notes in Artificial Intelligence (LNAI), 4570, pp. 572-581, 2007.

37. Feature selection techniques and comparative studies for large-scale manufacturing processes

Author: Buhwan Jeong and Hyunbo Cho*

Journal: International Journal of Advanced Manufacturing Technology, Vol. 28, No. 9, pp. 1006-1011, 2006.

36. Design and conceptual development of shop floor controllers through the manipulation of process plans

Author: Hyunbo Cho, Y. Son, and A. Jones

Journal: International Journal of Computer Integrated Manufacturing, Vol. 19, No. 4, pp. 359-376, 2006.

35. Web services based parallel and distributed simulation experience

Author: Taejong Yoo, Hyunbo Cho, and E. Yücesan

Journal: WSEAS Transactions on Systems, Vol. 5, No. 5, pp. 973-980, 2006.

34. Kernel software for efficiently building, reconfiguring, and distributing an open CNC controller

Author: Sungsik Park, S. Kim, and Hyunbo Cho

Journal: International Journal of Advanced Manufacturing Technology, Vol. 27, No. 7-8, pp. 788-796. 2006.

33. Rapid development of a distributed shop floor control system from an XML model-based control software specification

Author: Junho Shin and Hyunbo Cho

Journal: International Journal of Production Research, Vol. 44, No. 2, pp. 329-350, January 15, 2006.

32. A combined process/resource models-based approach to shop floor simulation

Author: Pyoung Yol Jang, A. Jones, and Hyunbo Cho

Journal: WSEAS Transactions on Computers, Vol. 4, No. 9, pp. 1062-1072, 2005.

31. A semantic web service framework to support intelligent distributed manufacturing

Author: B. Kulvatunyou, Hyunbo Cho, and Y. Son

Journal: International Journal of Knowledge-Based and Intelligent Engineering Systems, Vol. 9, No. 2, pp. 107-127, 2005.

30. Efficient optimization of process parameters in shadow mask manufacturing using NNPLS and genetic algorithm

Author: Buhwan Jeong, J. Lee, and Hyunbo Cho

Journal: International Journal of Production Research, Vol. 43, No. 15, pp. 3209-3230, 2005.

29. Determination of efficient simulation model fidelity for flexible manufacturing systems

Author: Madan, Y. Son, Hyunbo Cho, and B. Kulvatunyou

Journal: International Journal of Computer Integrated Manufacturing, Vol. 18, No. 2-3, pp. 236-250, 2005.

28. Request network model for deadlock detection and avoidance in automated manufacturing systems

Author: S. Lee, Y. Cha, Hyunbo Cho, M. Jung

Journal: International Journal of Production Research, Vol. 42, No. 16, pp. 3203-3218, 2004.

27. Using business process specifications and agents to integrate a scenario-driven supply chain

Author: Hyunbo Cho, B. Kulvatunyou, H. Jeong, and A. Jones

Journal: International Journal of Computer Integrated Manufacturing, Vol. 17, No. 6, pp. 546-560, 2004.

26. Integration framework of process planning based on resource independent operation summary to support collaborative manufacturing

Author: B. Kulvatunyou, R. A. Wysk, Hyunbo Cho, and A. Jones

Journal: International Journal of Computer Integrated Manufacturing, Vol. 17, No. 5, pp. 377-393, 2004.

25. CORBA-based integration framework for distributed shop floor control

Author: Junho Shin, Sungsik Park, Chuljin Ju, and Hyunbo Cho

Journal: Computers and Industrial Engineering, Vol. 45, No. 3, pp. 457-474, 2003.

24. Elaboration and validation of AND/OR graph-based non-linear process plans for shop floor control

Author: Pyoung Yol Jang, Y. Son, and Hyunbo Cho

Journal: International Journal of Production Research, Vol. 41, No. 13, pp. 3019-3043, 2003.

23. Quality-oriented shop floor control system: Framework, implementation, and experimental results

Author: Gwang-Rim Yi, Junho Shin, Hyunbo Cho, and Kwang-Jae Kim

Journal: Journal of Manufacturing Systems, Vol. 21. No. 3, pp. 187-199, 2002

22. Functional architecture and enabling technologies for distributed shop floor control

Author: Junho Shin, Sewon Oh, and Hyunbo Cho

Journal:International Journal of Computer Integrated Manufacturing, Vol. 15, No. 6, pp. 526-540, 2002.

21. Partial least square-based model predictive control for large-scale manufacturing process with disturbances

Author: Kyuchul Song, Pyoung Yol Jang, Hyunbo Cho, and Chi-Hyuck Jun

Journal: IIE Transactions, Vol. 34, No. 10, pp. 881-890, 2002.

20. Adaptive and dynamic process planning using neural networks

Author: Jaekoo Joo, Sungsik Park, and Hyunbo Cho

Journal: International Journal of Production Research, Vol. 39, No. 13, pp. 2923-2946, 2001.

19. A virtual reality system for product configuration and analysis based on WEB, VRML, and CORBA

Author: I. Choi, Y. Kang, S. Bae, and Hyunbo Cho

Journal: International Journal of Industrial Engineering, Vol. 8, No. 2, pp.105-114, 2001.

18. Petri-net-based rapid realization of the execution module for distributed shop floor control

Author: Sungsik Park, Pyoung Yol Jang, and Hyunbo Cho

Journal:Computers in Industry, Vol. 45, No. 2, pp. 155-175, 2001

17. Planning and sequencing heuristics for feature-based control of holonic machining equipment

Author: Junho Shin and Hyunbo Cho

Journal: International Journal of Flexible Manufacturing Systems, Vol. 13, No. 1, pp. 49-70, 2001.

16. Dynamic planning model for determining cutting parameters using neural network for feature-based process planning

Author: Jaekoo Joo, Gwang-Rim Yi, Hyunbo Cho, and Y. Choi

Journal: Journal of Intelligent Manufacturing, Vol. 12, No. 1, pp. 13-29, 2001.

15. A conceptual framework for generation of simulation models from process plan and resource configuration

Author: S. Lee, Hyunbo Cho, and M. Jung

Journal: International Journal of Production Research, Vol. 38, No. 4, pp. 811-828, 2000.

14. A prototype virtual reality system through IDEF modeling for product configuration and analysis

Author: Junho Shin, Jaekoo Joo, I. Choi, S. Han, and Hyunbo Cho

Journal: International Journal of Industrial Engineering, Vol. 7, No. 1, pp. 15-25, 2000

13. B-spline surface approximation to cross-sections using distance maps

Author: J. Jeong, K. Kim, H. Park, Hyunbo Cho, and M. Jung

Journal: International Journal of Advanced Manufacturing Technology, Vol. 15, pp. 876-885, 1999.

12. Efficient sculptured pocket machining using feature extraction and conversion

Author: Jaekoo Joo and Hyunbo Cho

Journal: Journal of Manufacturing Systems, Vol. 18, No. 2. pp.100-112, 1999

11. Integrated framework of IDEF modeling methods for structured design of shop floor control systems

Author: Hyunbo Cho and Inbom Lee

Journal: International Journal of Computer Integrated Manufacturing, Vol. 12, No. 2, pp. 113-128, 1999

10. Petri net-based execution models for control of a flexible manufacturing system

Author: Hyunbo Cho

Journal: International Journal of Production Research, Vol. 36, No. 1, pp. 231-250, 1998.

09. Efficient feature-based process planning for sculptured pocket machining

Author: Jaekoo Joo, Hyunbo Cho, and W. Yun

Journal: Computers and Industrial Engineering, Vol. 33, No. 3&4, pp.493-496, 1997.

08. An intelligent workstation controller for integrated planning and scheduling of an FMS cell

Author: Hyunbo Cho, J. S. Smith, and R. A. Wysk

Journal: Production Planning and Control, Vol. 8, No. 6, pp. 597-607, 1997

07. Architectural requirements for rapid development of agile manufacturing systems

Author: M. Jung, M. K. Chung, and Hyunbo Cho

Journal: Computers and Industrial Engineering, Vol. 31, No. 3/4, pp. 551-554, 1996

06. Enabling technologies of agile manufacturing and its related activities in Korea

Author: Hyunbo Cho, M. Jung, and M. Kim

Journal: Computers and Industrial Engineering, Vol. 30, No. 3, pp. 323-334, 1996.

05. 1995 An intelligent workstation controller for computer integrated manufacturing: Problems and models

Author: Hyunbo Cho and R. A. Wysk

Journal: Journal of Manufacturing Systems, Vol.14, No. 4, pp. 252-263, 1995.

04. 1995 Graph-theoretic deadlock detection and resolution for flexible manufacturing systems

Author: Hyunbo Cho, T. K. Kumaran, and R. A. Wysk

Journal: IEEE Transactions on Robotics and Automation, Vol. 11, No. 3, pp. 413-421, 1995

03. 1994 A structured approach to deadlock detection, avoidance, and resolution in flexible manufacturing systems

Author: T. K. Kumaran, W. Chang, Hyunbo Cho, and R. A. Wysk

Journal: International Journal of Production Research, Vol. 32, No. 10, pp. 2361-2380, 1994

02. A formal approach to integrating computer aided process planning and shop floor control

Author: Hyunbo Cho, A. Derebail, T. Hale, and R. A. Wysk

Journal: ASME Transactions: Journal of Engineering for Industry, Vol. 116, No. 1, pp. 106-116, 1994

01. A robust adaptive scheduler for an intelligent workstation controller

Author: Hyunbo Cho and R. A. Wysk

Journal: International Journal of Production Research, Vol. 31, No. 4, pp. 771-790, 1993