Robotoolz Rt-7610-5 User Manual

The Robotoolz Rt-7610-5 is an electronic self-leveling, 5-beam level, square and plumb laser level that can be used for various construction and surveying applications. It has five orthogonal beams that provide simultaneous plumb, level and square reference points. It also has a rugged, durable design that withstands vibration, impacts and temperature changes. The device comes with a multipurpose attachment accessory that allows it to be mounted on walls, door frames, metal and wood studs, pipes, tripod, etc. The device is powered by four AA batteries and has a low battery indicator and an auto-shut off feature. The device also has a built-in level sensor that causes all five beams to blink if the device is out of level. The device can be recalibrated by the user using a simple procedure.

Features and Specifications

Accuracy: Â1/4" at 100'

Laser Range: 100'

Visible out to: 200'

Self-Leveling Method: Electronic Servo operation, gravity reference

Level range: Forward to Backward (pitch): Â6Â; Side to Side (roll): Â4Â

Laser Diode: Class II, 635nm @

Recalibration: End userâno downtime

Power Supply: 4 "AA" Batteries (included)

Tripod Mount: 5/8"x 11 (tripod not included)

Size: 5.5" x 4.0" x 2.5"

Weight: 1.2 lbs. / 525 gm

Storage Temperature: -4ÂF (-20ÂC) - 158ÂF (70ÂC)

Included Items

RT-7610-5 Vector 5eâ Laser level

Anchoring Strap

Laser Enhancement Glasses

Laser Target

Miniature Screwdriver

Multipurpose Attachment Accessory

Storage & Travel Case

User Guide & Addendum A

User Safety

The device has labels attached to it that indicate the laser radiation hazard and the precautions to be taken. The labels are not to be removed or defaced. The device uses controls, adjustments and procedures that are specified in the user manual. Any deviation from these may result in laser radiation exposure. The user should never stare directly into the beam or view it directly with optical instruments. The user should not disassemble or attempt to perform any internal servicing. Repairs or service to the device are to be performed by authorized service centers only. The user should not aim the laser beams at others.

Robotoolz Rt-7610-5 User Manual

DOWNLOAD

Using the Device

The device can be used for various applications such as leveling, plumbing, squaring, grading and transferring points. The user guide provides detailed instructions and illustrations for each of these applications. Some of the general steps for using the device are:

Turn on the power switch on the side of the device.

The device will automatically self-level within a few seconds. If the device is out of level, the beams will blink until the device is leveled.

Use the multipurpose attachment accessory to mount the device on the desired surface or object.

Adjust the position and orientation of the device as needed.

Use the laser beams as reference points for your application.

Turn off the power switch when done.

The user should always check the accuracy of the device before using it for critical measurements. The user guide provides a simple method for checking the accuracy using a wall and a tape measure.

Recalibration Procedure

If the device becomes inaccurate or damaged, it can be recalibrated by the user using a simple procedure that involves a calibration port, a miniature screwdriver and a smooth vertical surface. The user guide provides detailed instructions and illustrations for the recalibration procedure. The user should perform the recalibration procedure only if the device is out of warranty or if authorized service is not available.

Sources

The information in this article is based on the following sources:

[Product Catalog - Robotoolz]

[ROBOTOOLZ RT-7610-5 USER MANUAL Pdf Download ManualsLib]

[5 Beam Laser Level Robo Toolz Rt-7610-5 Vector 5e - TZSupplies.com]

[Robotoolz RT-7610-5 Electronic Self-Leveling 5-Beam Level, Square and ...]

[RoboToolz Laser Level with Simultaneous Plumb and Square, ModelRT-7610-5]

a104e7fe7e