How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a lightweight, mic-equipped wired IEM you can wear for calls, gaming and workouts without thinking about it, choose Piluyaa Gaming Headphones IEM; if you need a hybrid-driver, mic-free in-ear monitor built for pure listening and noise isolation, choose Jooy Paii Odio Ear Monitor Headphones. That's the short version. The longer version is about what each one is actually designed to do — and the two are pointed in genuinely different directions.
• Piluyaa's biggest strength: an ultra-light 2.3g-per-earbud around-ear design with ear fins, a memory ear hook, three sizes of soft tips and an in-line remote with mic — comfort and practicality first.
• Piluyaa's biggest trade-off: single 11mm dynamic driver, no active noise control, and the remote doesn't do volume — it's a convenience-first set, not a critical-listening tool.
• Jooy Paii Odio's biggest strength: a hybrid 1BA + 1DD driver setup with a carbon-fiber weave faceplate, 45° angled sound outlet and sound-isolation design aimed at detail, bass control and blocking the room out.
• Jooy Paii Odio's biggest trade-off: no mic at all, and only one set of eartips in the box — it assumes you're listening, not talking.
• Pick Piluyaa if you want one wired pair for gaming, calls, video and movement.
• Pick Jooy Paii Odio if you want an in-ear monitor for music, monitoring and immersive gaming where isolation and driver quality matter more than a microphone.
The Piluyaa set — sold as the QKZ ENZO — is built around the idea that you'll be wearing it for hours and moving around while you do. A single earbud weighs 2.3g. The shell is PC with a UV varnish finish, the tips are soft TPE, and there's a TPE fin behind the cavity plus a memory ear hook that holds its shape around your ear. That's a lot of engineering aimed at one outcome: it stays put. If you've ever had a cheap earbud pop out mid-set at the gym, this is the design answer to that problem.
Sound-wise it runs a single 11mm dynamic driver, 16 ohm impedance, 20Hz–20,000Hz. The tuning is described as bright and clear with deep bass and clean treble — the kind of profile that flatters game audio, YouTube, and everyday music without asking much from your source. The cable is a 4-core 4N OFC wire with a 3.5mm plug, so it works with Android phones, Windows phones, MP3/MP4 players and speakers. There's an in-line mic sitting just below the jaw with remote buttons for answer/end, pause/play and track skip. Note the honest limitation: no volume control on the remote, and no noise control at all.
Buy it if you want a wired all-rounder for gaming, video, phone calls and workouts, and you value a secure, near-weightless fit plus a working microphone. Skip it if you need volume buttons on the cable, want real noise isolation, or you're chasing a multi-driver audiophile signature. This is a daily-driver convenience IEM, not a reference monitor.
The Jooy Paii Odio QT820 goes the other way entirely. It's a hybrid in-ear monitor — one balanced armature plus one dynamic driver — which is the classic recipe for getting crisp, detailed upper frequencies from the armature while the dynamic driver handles the low end. The result, per the design intent, is tight, powerful bass with lifelike vocals and an expansive soundstage. It's tuned for musicians, singers, audiophiles and gamers who want to be pulled into the mix rather than just hear it in the background.
The build reflects that ambition. The blue carbon-fiber weave faceplate isn't just decoration — it's described as acting as a resonance chamber that damps unwanted vibration, keeping the sound clean. The housing is polycarbonate, lightweight and scratch- and fingerprint-resistant, with a shell-white finish. The 45° angled sound outlet is a genuinely functional detail: it aims sound into the ear canal more directly, which improves the seal and therefore the isolation. Noise control here is sound isolation rather than anything electronic — meaning the fit does the blocking.
Comfort is handled with an ergonomic ear tip and hook design, and the box includes S/M/L silicone eartips so small, medium and large canals can all get a proper seal. That matters more than it sounds: a hybrid IEM only delivers its bass and isolation when the seal is right. There's a one-year manufacturer warranty. The one thing you give up is obvious — no microphone. This is a listening tool. Buy it if you want an affordable entry into hybrid-driver IEMs for music, monitoring and immersion. Skip it if you need to take calls or use voice chat.
• Best for calls and voice chat → Piluyaa. It has an in-line mic and remote buttons; the Jooy Paii Odio has none.
• Best for noise isolation → Jooy Paii Odio. Sound isolation is a stated design goal, reinforced by the 45° outlet and S/M/L tip selection.
• Best for secure fit during workouts → Piluyaa. Ear fins plus a memory ear hook plus a 2.3g-per-bud weight is a combination built for movement.
• Best for music detail and bass control → Jooy Paii Odio. A 1BA + 1DD hybrid is a more capable driver configuration than a single dynamic driver.
• Best for plug-and-play across devices → Piluyaa. The 3.5mm plug is listed as working with Android, Windows phones, MP3/MP4 players and speakers.
• Best for small ears → Jooy Paii Odio. It ships with S/M/L tips and is explicitly designed to seal small, medium and large canals.
• Best for a lightweight, barely-there feel → Piluyaa. 2.3g per earbud is exceptionally light.
• Best for critical listening and monitoring → Jooy Paii Odio. No mic, no remote, just the drivers and the tuning.
If I were buying for myself and I had to pick one, I'd take the Jooy Paii Odio QT820. In my opinion, the hybrid 1BA + 1DD setup, the damped carbon-fiber faceplate and the angled sound outlet give you more genuine audio capability for the money — and if music and game immersion are the point, that's what matters. The catch is that you lose the mic entirely, so it only works if you have another way to talk.
If you need one pair to do everything — game, take calls, hit the gym — the Piluyaa is the smarter buy. Its fit system and in-line mic make it the better everyday companion. Check the current price on Amazon for both before deciding; the gap between them may settle it for you.
FAQ
what is in ear earphones
what is in ear monitor earphones
An in-ear monitor is an in-ear earphone designed for accurate, isolated listening — originally for performers hearing themselves on stage. The Jooy Paii Odio QT820 fits that description with its hybrid driver and sound-isolation design; the Piluyaa is better described as a gaming/consumer IEM with a mic.
how to clean earphones ear wax
Wipe the tips and nozzle gently with a dry cloth or a soft brush after use, and remove the silicone tips periodically to rinse them. Both sets use removable silicone tips, but neither ships with a cleaning tool, so a small dry brush is worth having on hand.
how to ear earphones
Fit matters more than anything else. Pick the tip size that seals without pressure, then loop the cable over the top of your ear — both models use a hook-style design. A proper seal is what delivers bass and isolation; if sound feels thin, try the next tip size up.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Amazon Basics On-Ear Headphones vs Skullcandy Jib USB-C, KangGlow Earbuds vs Rolosar Earbuds: HIFI Stereo Earbuds, DECIBEL DEFENSE Ear Protection vs ZXQZYM Kids Headphones Bulk, SOAR NBA vs Xoruezls Open Ear Earbuds